PDA

View Full Version : Black specks and running look will it go away?



StlouisX50
01-04-2006, 03:44 PM
I just got my can of veil and noticed that you are only supposed to put it on 50 degrees plus. However theres no way to do this this time of year. I tried to apply it and noticed tiny black specks as well as veil application lines (not drip lines). Is the problem the cold or is this normal for Veil? I tried the hair dryer trick for a few mins as well.

-Black specks normal?
- Application lines normal will they go away?


Please let me know!

Stlouisx50

StlouisX50
01-04-2006, 04:50 PM
Also, I took a few photos of the Veil with specks however they it didn't appear in the photos as much as I can see it with the naked eye. I did invert the photos color and noticed how you can see a dark blue and a light blue. After Veiling lights what color should they be after Veiling them?

Veil Guy
01-04-2006, 05:19 PM
No, that is not normal!

I suspect its do to the weather.

1) Make sure you shake the material well and then wait about 5 minutes afterwords before applying.

2) When temps get into or below the 50s, things can get a little funky - although a hair dryer may help a little bit (pre-warming the headlights with the dryer may help further).

3) Try to find a place indoors (like a garage) that may be a little warmer, this time of year to do your application.

Please keep me posted on your progress.

Veil Guy 8)

StlouisX50
01-04-2006, 05:27 PM
I might beable to take the headlights off in a few days, and let them dry in the day through the night. I will leave the Veil on there for now, due to the fact that I'd rather have some on there than none. When I get a chance Ill try to take the headlight covers off and clean them and re-apply!

stlouisx50

SmaartAasSaabr
01-04-2006, 07:01 PM
Maybe you can find a heated garage somewhere?

edit - removing the lights, that's the ticket!

SamuraiVM
01-04-2006, 08:07 PM
Man, I love living in Miami. It hardly ever goes below 50 down here. :-p

StlouisX50
01-04-2006, 09:02 PM
Yeah I'M sure the Veil won't stay on , the cars are pretty covered with dew tonight :cry:

brick
01-04-2006, 09:21 PM
I think I might be able to explain the black specks. I did a LP cover a couple of weeks ago inside where it was nice and warm and dry, thinking that this would come out perfect. However I, too, got the black specks. What I figured out is that little tiny bits of material (basically dust) were falling off of my sweater onto the cover. It doesn't look so bad now that it's dry but they were sucking up the VEIL like little sponges wherever they landed. I guess cleanliness is the third pillar of VEIL application, in addition to temperature and moisture.

Dilip
01-06-2006, 02:21 AM
Can't he just leave his headlights on for a period of time before and after he applies the veil? That way his lights will be very warm.

Also..make sure you clean the headlights very throughly with some good stuff and let it dry before you apply veil. You definately dont want to apply the veil to a headlight that is not 100% well cleaned.

Veil Guy
01-06-2006, 07:47 AM
I have done that from time to time as well especially with the hi-beams on.

It certainly can't hurt.

Veil Guy 8)

StlouisX50
01-06-2006, 09:27 AM
Well it got very cold the night that the black specs were on the lights. The Veil worked ok on the tail lights but the headlights ended up making a crack like effect on the headlights.

So I'll re-apply soon.


stlouisx50

Mackid343
01-06-2006, 04:16 PM
Also..make sure you clean the headlights very throughly with some good stuff and let it dry before you apply veil. You definately dont want to apply the veil to a headlight that is not 100% well cleaned.

i also had a dust problem with my application. what can you use to clean the lights before applying? i've been stuck with a very chipped up coat of veil (now almost completely gone off my drivers side headlight) since i put it on. i wasnt aware of the temperature thing but it was around 45 for a high. plus i got caught in the rain the next night after i applied. i figured i'd be ok since i applied it about 24 hours before but when i got home, lots of the veil had chipped off :(. so its been that way since like october. i really want to fix it, but until its about april-may, i wont be able to. there isnt really any way i can let my car sit for more than a day without driving it. i couldnt take the lights out either because i'd need to be driving that next night. good thing the new jammers will be out soon. i'll be purchasing one as soon as they do and are tested

Dilip
01-06-2006, 08:49 PM
I used alcohol or cleanix, the blue colour glass cleaning spray to clean my headlights throughly first, then waited 20 mins for it to dry before applying my Veil.

brick
01-06-2006, 08:50 PM
A liberal cleansing with Windex or similar should be good enough. You could try alcohol but I would avoid it since it can fog plastic (not good). I have had a couple of coatings go bad like that, chipping away to nothing. The better you clean and the better the environment during and just after your application, the less of that you will see.

The main reason I am about to switch over to clear headlight covers is so that I can clean them and apply it indoors so as to give it the best chance to adhere properly.

StlouisX50
01-06-2006, 09:12 PM
Forget taking the headlights out. I found out it's a ***** to do! I'll just use the cracked version of Veil on the headlights and then remove it and re-apply when I'M assured it will be warm!