PDA

View Full Version : Blinder pictures/help



sethy
03-21-2005, 04:35 PM
Hey everyone, I am back with another question about the blinder. I went back in and tightened the mounts that hold the blinder underneath my car. The blinder is set back into my car about 2 to 3 inches of the grill.

Here are some pics.
http://69.133.113.105/pics/blinder2.jpg
here is how I have my blinders mounted under the car. This is an industrial cloth that has been screwed in keeping the blinder secure
http://69.133.113.105/pics/mount.jpg

My question is, when I went back and tightened it a little more today, I noticed that I may have moved it just the littlest of bit. I am not sure if it is facing 100% foward, but it is darn near close by the looks of it. Will I have any problems with this?


Also, I have my blinder mounted about 1 1/2 to 2 inches from each side of the license plate.
http://69.133.113.105/pics/blinder.jpg
I am not sure if this positioning will give me 100% protection from the laser if they hit the corner of my headlights. If the laser is 18 inches at 500 feet, that means that there is about a 1/2 foot area on the corner of my headlights that can still be hit at 500 feet... am I right?

happya$$
03-21-2005, 04:46 PM
Sethy,

Did you do that yourself or did you have it professionally installed?

sethy
03-21-2005, 04:47 PM
Sethy,

Did you do that yourself or did you have it professionally installed?

That would be me and a friend. I know it worked before I tightened it... I am wondering if it is still gonna work if its not 100% facing foward, but damn near close.

happya$$
03-21-2005, 04:57 PM
I say yes that it should work.

Radar Roy
03-21-2005, 07:03 PM
I would try to get the blinder heads further out front, the further the better

sethy
03-21-2005, 08:55 PM
I would try to get the blinder heads further out front, the further the better
I would move them out a little more and I may, but I want to keep them in there so people can not notice them by looking at my car. I love the low profile that I am keeping :)

compu44
03-21-2005, 09:34 PM
hehe, I didn't notice the screw in the pic. Before I read the text it looked like you had it mounted with duct tape :D

stealthJamal
03-22-2005, 03:40 AM
I would try to get the blinder heads further out front, the further the better
I would move them out a little more and I may, but I want to keep them in there so people can not notice them by looking at my car. I love the low profile that I am keeping :)

Why not move them out into the ideal location for maximum effectiveness. You won't have a problem unless laser jammers are illegal in your state.

Laser jammers are illegal in my state and my front jamming heads are clearly obvious on my car. I even had a VA state cop stand right in front of my car and look right at it, the dumbass didn't know what they were. Cop had a confused look on his face like he was trying to figure it out. :lol: I was glad when the traffic moved and I got the hell out of there cause if the cop figured it out he could of gave me a big wopping ticket of $40. 8)

sethy
03-22-2005, 06:36 AM
Why not move them out into the ideal location for maximum effectiveness. You won't have a problem unless laser jammers are illegal in your state.

My dad is a pretty law abiding person. If he knew I had one, he'd probibally stop help funding my college :roll:

crazyVOLVOrob
03-22-2005, 03:49 PM
Why not move them out into the ideal location for maximum effectiveness. You won't have a problem unless laser jammers are illegal in your state.

My dad is a pretty law abiding person. If he knew I had one, he'd probibally stop help funding my college :roll:So is my father, but after i got a laser ticket. He told me that maybe i should look into a jammer or fight the ticket in court

SETITOFF
03-22-2005, 04:24 PM
I would try to get the blinder heads further out front, the further the better
I would move them out a little more and I may, but I want to keep them in there so people can not notice them by looking at my car. I love the low profile that I am keeping :)

You may be obstructing the ability of the heads to receive. Look closer at your bumper and the space available to bring them forward. If you do it right, they'll still be recessed well enough so they aren't visible.

I know where I'd mount them 8)

PM me Sethy and I'll talk you through ref. your pics.

crazyVOLVOrob
03-23-2005, 01:13 PM
I know where I'd mount them 8)

PM me Sethy and I'll talk you through ref. your pics.
yeah i'd mount them in the gill above the bottom one, but i'm not a blinder installer

marlinspike
03-23-2005, 02:01 PM
With a grill that small he'll be cutting down on radiator cooling.

sethy
03-23-2005, 02:02 PM
yeah i'd mount them in the gill above the bottom one, but i'm not a blinder installer

That is where I mounted them...

marlinspike
03-23-2005, 02:13 PM
yeah i'd mount them in the gill above the bottom one, but i'm not a blinder installer

That is where I mounted them...

He means the grill that the hood makes the top of.

SmaartAasSaabr
03-23-2005, 03:00 PM
With a grill that small he'll be cutting down on radiator cooling.

she's a bottom feeder

marlinspike
03-23-2005, 04:14 PM
With a grill that small he'll be cutting down on radiator cooling.

she's a bottom feeder

I don't know. I think every car needs some air at the top, and that upper grill is as little some as I think you can get away with.

SmaartAasSaabr
03-23-2005, 05:06 PM
Remember the Pasnaat?
http://www.pharfruminsain.com/forsale/images/poster-passatacorn.jpg

sethy
03-23-2005, 06:37 PM
yeah i'd mount them in the gill above the bottom one, but i'm not a blinder installer

That is where I mounted them...

He means the grill that the hood makes the top of.

I felt that I didnt reall need to mount them there. The car starts angling heavily right at the grill part, so a cop would not want to aim his laser in that area.