PDA

View Full Version : AutoCom Active Plus



GreenRadar
10-22-2010, 03:47 PM
I just spoke with a custom, and he was having some problems with his AutoCom Active Plus working with his Beltronics GX65, he says that when he turns on the bike the GX65 is going off in a high pitch loud squeal. Anyone have any suggestion on what could be causing this?

According to the customer, the detector is not alerting to any frequency, and he uses the AutoCom for bike - bike communication, radio and blue tooth.

roninmd
10-25-2010, 06:34 PM
Have you tried a ground loop isolator? http://lh3.googleusercontent.com/public/5YABhcnrtG1buInxT8S_9zKlPO4qRzVLUwDofdCezeOHRNQU92 f0RA7PT6M8DG7JHSWT5fiolGpv6WCZ_5OzNMDxnWvAwc1S8hm9 _nFhGkdxnmpWmaioLBc885pS4Z-4Lby92BqOmpWZzVHyz2v2yrIfGF4Nn3sJPe9XJHpESJjE0DeOH hTP4aXi_7GfjCE

GreenRadar
10-25-2010, 06:36 PM
I actually just spoke with him today, and since I wasn't able to get any actual good answer for him to this problem he decided to go a head and try the hard system so we set an order up for him on that. As for the ground loop isolator I will give him a call and see what he thinks of that, thanks for the info

roninmd
10-25-2010, 10:52 PM
You could also try a phono adapter that attenuates the sound...http://www.dv247.com/assets/products/37666_l.jpg

Rocketman59
10-30-2010, 11:39 AM
I has a this problem with Escort detectors before I went to V-1. Seems that the speaker output is floating above ground. so some kind of isolation is required between RD and autocomm input. Ground Loop isolator would do it I think.