PDA

View Full Version : Yamaha R6 & Rider M27 + Bel STi



R6n350GT
12-12-2010, 07:25 AM
I have got installation all under control but want to double check my head placement to make sure they are all good. I will post a write up / guide for others on how i did it etc but need help with placement before i do.

Front; does it need to come forward further or can it go back further or is it perfect? I know its not level, we are just looking at position.
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_0986-1.jpg

side
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_0988-1.jpg

Back is where i am unsure.
Option 1:
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_1019-1.jpg
or Option 2:
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_1015-1.jpg
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_1014.jpg
What you think?

aa2033
12-12-2010, 11:43 AM
front looks good, for the rear i'd put it in the second position above the LP. the first one is way to recessed.

dont forget to put a jammer head on your helmet!

radarrob
12-12-2010, 12:10 PM
when all done get it tested. Nice bike

R6n350GT
12-12-2010, 03:59 PM
Hope ur joking about helmet!!! Haha.
dam I thought the back one would be too recessed. It just is like bam, look at ne on the back.. Wonder what my excise is if I ever get asked about it. Wish they made these heads able to be recessed as that 1st position is way more stealth :( will post picks when done.

When it comes to testing in Australia we don't have meetings that I'm aware of like u guys :( is one of those blinder laser testers worth getting?

Ok Install pics:
Step 1: Mounting CPU Box
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_0980.jpg

Step 2: Organizing cables
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_0984.jpg

Step 3: Where the wires go under the seat. Power node connected to battery, one end plugged into kill switch and then kill switch plugged into cpu box
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_0990.jpg

Step 4: Attaching the kill switch, loosen fork clamp so you can fit in the bracket of the switch then cable tie to handle bar. Run wires under fuel tank (wires can sit in the rubber mount)
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_0978-1.jpg
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_0979.jpg

Step 6: Silicon the status LED somewhere, i put it here.
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_1005.jpg

Step 7: Front head install
Will update when done

Step 8: Back head install
Will update when done


DONE - now if you got a RDI as well cause you have a RD then!

Step 9: Use double sided tape to secure the RDI cpu
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_1045.jpg
place it on top of battery - if unsafe please let me know - it may fit in the back storage area..
Also connect 2nd power node
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_0991.jpg

Step 10: Run cable under tank, alongside right air tube and then up fairing stay. Push wires in the gap shown, take off the two screws first.
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_0992.jpg

Step 11: Unscrew right mirror so fairing can be lifted a little and you then see a hollow in the fairing stay. Push the Y splitter box from the RD cable in there and push two wires to other side of windscreen so they hang on the inside above tacho.
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_0994.jpg

DONE!
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_0997.jpg
http://i40.photobucket.com/albums/e208/Davis_711/V35/IMG_0995.jpg

aa2033
12-12-2010, 04:03 PM
Hope ur joking about helmet!!! Haha.
dam I thought the back one would be too recessed. It just is like bam, look at ne on the back.. Wonder what my excise is if I ever get asked about it. Wish they made these heads able to be recessed as that 1st position is way more stealth :( will post picks when done.

When it comes to testing in Australia we don't have meetings that I'm aware of like u guys :( is one of those blinder laser testers worth getting?

i'm only half kidding about the helmet

http://www.radardetector.net/forums/real-experiences/53952-my-first-motorcycle-jammer-kill.html


all the testers do is tell you if the heads are firing. not if you can successfully prevent punch throughs.

R6n350GT
12-12-2010, 04:17 PM
Lol im reading the thread now, ****..

Is the front placement one ok or does it need to be moved forward? Im repainting fairings cause of stone chips and im worries about the front head. Are these different to the M47 heads where you cant use something like invisible shield by zagg to protect the heads?

aa2033
12-12-2010, 04:25 PM
if you have the room to bring the front head forward, i would. m27 and m47 are the same heads, just the amount of heads
m27 (2 heads) m47 (4 heads). a thin layer of invisible shield wouldn't really help much at higher speeds, and i dont know if it effects performance. so i couldn't help there. but i wouldn't bother.

LI dual HP would of made you bullet proof :P but that's expensive ^_^

R6n350GT
12-12-2010, 04:57 PM
if you have the room to bring the front head forward, i would. m27 and m47 are the same heads, just the amount of heads
m27 (2 heads) m47 (4 heads). a thin layer of invisible shield wouldn't really help much at higher speeds, and i dont know if it effects performance. so i couldn't help there. but i wouldn't bother.

LI dual HP would of made you bullet proof :P but that's expensive ^_^

I will have to contact Zagg then, what do i ask? does it interfer/reduce signals of light waves, IR ???

How much more do i move it forward, i can have it sit flush with the black OR silver part of the fairing. Id rather for stealth look have it flush with the black but if it means a big difference in JGJ then i can put it closer forward and have it flush with silver but then its clearing sticking out..

Thanks for your help :)

Oh and why is LI better than Blinder?

aa2033
12-12-2010, 05:06 PM
LI use laser diodes as apposed to blinder using LEDs. diodes are more powerful and more reliable (pretty sure they are more reliable). I have both blinder and LI. and at first i liked the blinder, but they are just inconsistent and unreliable. not for me. my LI are awesome. more powerful too.

I would just move it as forward as much as you need. i would have it flush with that silver nose thing in the middle.

as far as the zagg goes, again, not sure if i can help you much, but i REALLY wouldn't bother. if you want, you can. but i haven't heard of anyone putting it on their jammers, so i cant tell you from past readings about it. someone else will have to chime in

R6n350GT
12-12-2010, 05:19 PM
Thanks aa.
I looked at LI, do get Quad for my car and then they dont make a specific motorbike one that links with vizalert so would end up costing me wayway more. I think blinder is good enough for me, if i was a hoon i prob would save up extra $ and get the LI but this is just to make me more aware of my speeding!!

Looking at the Veil G4 paint, where is the cheapest place to buy it from?
So buying a radar tester is worth it just to make sure the heads are on and working? they are only like $30..

aa2033
12-12-2010, 05:48 PM
if you have the money, go for it. some TV remote controls can set off the jammers. On a bike, i dont think veil will help much. the jammer should be enough. it hurts night time driving performance, and with a bike, you need all the light you can get.

R6n350GT
12-13-2010, 12:31 AM
if you have the money, go for it. some TV remote controls can set off the jammers. On a bike, i dont think veil will help much. the jammer should be enough. it hurts night time driving performance, and with a bike, you need all the light you can get.

Ill get it for my car and not bother with Bike.
One last Q, can i mount the RDI cpu with double sided tape on my battery? Its just a bit to fat to fit under the seat :/

GUV
12-22-2010, 02:55 PM
Are you really riding around with that RD mounted on your screen? I think it is going to be your undoing on the whole kit, QLD coppers are dumb but not that dumb.

R6n350GT
02-07-2011, 06:16 PM
Are you really riding around with that RD mounted on your screen? I think it is going to be your undoing on the whole kit, QLD coppers are dumb but not that dumb.

What if i have it on silent so the screen is black, they wouldnt see any thing unless they looked hard... What other option do i have? It has saved me a few times now :)

porky786
02-13-2011, 04:08 PM
Has your RD fell off yet? You need a better mount , its not reliable

PMoth
02-13-2011, 07:34 PM
I bought a mount from Radarbusters. Matches my triple clamp perfectly. And it's solid.

GreenRadar
02-13-2011, 08:14 PM
I bought a mount from Radarbusters. Matches my triple clamp perfectly. And it's solid.

sadly we don't sell mounts anymore :(

Well we do have the one made for TPX detectors but that is it

R6n350GT
02-15-2011, 05:58 AM
For those thinking about the super suction mount for the Bel STi forget it, its useless.