PDA

View Full Version : Photos of Veil on a license plate?



fallen8511
12-07-2004, 11:24 AM
Could I get some photos of what veil looks like when applied to lights and the license? Up close would be perfect.

Radar Roy
12-07-2004, 01:48 PM
I just sent a few photos to Bob with photos of my Harley with the Veil on the headlamps, I don't have any of a license plate but I know he has.

Bob, how about putting a page on your site with close ups of before and after, headlamps, license plates and then we can post a link to your site with the pictures??

fallen8511
12-07-2004, 04:28 PM
That would be great, the pictures of that BMW on the site don't really show us much.

Veil Guy
12-07-2004, 05:29 PM
Close-ups of front of 540 before and after:

http://www.laserveil.com/faqs/

BTW, I had a before shot of the 540 and then a Countach for the after, but didn't use them because nobody will believe Veil will make a bimmer look like a lambo! :D

The Veil (http://www.veil.us) Guy 8)

fallen8511
12-07-2004, 05:45 PM
As I said before I can't really tell much from that photo, I'm hoping for a real close up as in the like the camera is 15 inches from the headlight so we can really see what is going on. Also a license plate shot would be good too.

Veil Guy
12-07-2004, 06:03 PM
I missed that earlier comment.

Depending on the particular lighting, it can be very difficult to tell that Veil has been applied to the vehicle once all lights are treated. Especially if they are coloured like the parking and/or brake lamps. Very difficult to tell, indeed.

Plate covers will tend to look a bit darker than their untreated counterparts.

What particularly are you looking for? Perhaps I can come up with some pics that'll be useful to you.

Or maybe we can start some sort of gallery, perhaps on the laserveil site.

Its an interesting thought.

The Veil (http://www.veil.us) Guy

fallen8511
12-07-2004, 10:53 PM
I'd really like to see one with with veil applied on the plate, or on a plate cover. A lot of states have laws about obsuring the license plate.

More pics with the headlights couldn't hurt.

Veil Guy
12-08-2004, 10:28 AM
I'll look into in and see what I can do.

We're planning to perform some additional testing in the next month, perhaps I'll get some pictures of different configurations.

The Veil (http://www.veil.us) Guy

stealthJamal
12-08-2004, 10:27 PM
I have Veil. The instructions for applying Veil to licsense plate instruct you to use a clear license plate cover and coat it with Veil on both sides for maximum effectiveness. If you coat it that way your plate will be VERY dark and noticeable. It was hard to read from 10 yards away when applied. I also tried putting one coating directly on the plate and it was also too dark. You can put Veil on your plate if you want, but any cop that sees it will know you are up to something. I suggest getting a laser shield for the plate and using Veil on the headlights and reflective surfaces.


Jamal

Veil Guy
12-08-2004, 11:15 PM
stealthJamal,

Couple of points worth mentioning.

1) We are addressing this problem as I write this. An improvement will be available with our next shipment to Roy.

2) When coating a plate on both sides try applying a thinner coat of each side. This should help lighten things up a bit.

The special materials we use, that make VEIL so effective, dictate much of the appearance. Form definately follows function in this case...

Thanks for your feedback.

The Veil (http://www.veil.us) Guy

happya$$
12-09-2004, 08:08 PM
I applied Veil directly to the licencse plate and put a laser shield on top of that and it is dark. My back one though is very visible. Man EVERYTHING was going SO smoothly until I bumped my arm and about 50% of my Veil spilled to the floor and arm, MAN am I depressed and ticked off I paid an arm and a leg for this stuff (which is AWESOME and I will promote it to my friends).

Veil Guy
12-09-2004, 09:15 PM
I have a question as I have not seen the laser cover that you are using.

Is the plate glossy? If so, may I suggest that you apply Veil to the front?

Gloss can hurt you - especially around curves.

The VEIL (http://www.veil.us) Guy

happya$$
12-10-2004, 12:07 PM
The link that I had from Ebay is NOT my vehicle. The one that I am using in both of my vehicles is the Laser shield. By the way to top off my bad news of the spillage that I had last night today's cold weather did not allow my veil to adhere fully to my headlights. I wasted about $40 thus far. Your product is awesome but man this bad luck is killing me. I am going to have to repark my vehicles in my garage turn on some portable heaters and let them run all night so my Veil can fully adhere to my headlights!

Veil Guy
12-10-2004, 04:35 PM
Drop me a private line with your address.

Better yet, please fill out your product registration form or online (http://www.laserveil.com/product-registration/) and I'll see what I can do for you. 8)

the veil (http://www.veil.us) guy

Radar Roy
12-10-2004, 04:56 PM
Bob

I have that open can that we used yesterday for the Harley tests.
Get his info and I can ship him that one.

happya$$
12-10-2004, 05:14 PM
You guys are UNBELIEVABLE! I TRULY mean that. I tell you the luck I had last night SUCKS but thank you BOTH so much for taking care of me! The registration is complete..

Veil Guy
12-30-2004, 07:03 AM
OK,

I am going to downsample the digital images Roy took of his hog and post them on my site as before and after. These pictures do a better job [than the 540] at showing the effect that Veil has on treated surfaces as the lighting was better than the shots of the bimmer.

I will let y'all know when they are on the site.

Thanks Roy for the shots!

The Veil (http://www.veil.us) Guy 8)