PDA

View Full Version : Curvy Headlights



Regis
04-04-2005, 01:25 AM
Hi all,

Just thought I'd throw this out there for opinions/thoughts.. I drive a Grand Am, which has very cury, non-flat headlights (and in fact, very few flat surfaces at all on the front of the vehicle). In Alberta, front license plates are not required and I certainly do not have one.

Any thoughts if this shape reduces laser reflection or helps scatter the signal anywhere but back to the targetting gun?

I am considering purchasing Veil to help even further, but admit, I find it's price for a new internet product with little exposure thus far a little risky. On the other hand, I see the Veil guy's contribution to the newsgroups here a definite positive sign that there is some integrity here. :) As a suggestion, perhaps a smaller quantity at a lower price would help lure more people like me into trying it, although I probably will anyway. :)

stealthJamal
04-04-2005, 02:41 AM
A black car that is curved with no reflective surfaces has the smallest "footprint" for a lidar gun read. So if your car is black or you install a black car bra(if your car is not black) and you Veil your headlights and anything else reflective on the front end, you will have a good decrease in the distance a speed reading is attainable.

Example of a good car would be the late model black Pontiac firebird, 1998 to 2002? Curved front end with flip up headlights.

SmaartAasSaabr
04-04-2005, 03:36 PM
Jamal - whenever I think of a good stealth car I think black 4th generation Firebirds...

The GA has fairly big headlamps and this will relflect like a real sum*****.

jbird
04-04-2005, 07:13 PM
I love my 4th gen fbody for this reason too but more so for the 350 under the hood and sleek styling. It is not black but dark in color with a full flat black bra. I also covered the front fog lights and have no front plate. During the day the only target for a laser gun operator is my skiny little turn signal lights at the far edges of the car. When I am hit from the front, about the only reflection an officer's laser gun gets is from my Blinder. :twisted:

SmaartAasSaabr
04-04-2005, 08:38 PM
Heh, well i've got a 400 under my hood... :wink:

marlinspike
04-04-2005, 08:56 PM
Heh, well i've got a 400 under my hood... :wink:

Yeah, well once I get some more money together I'll have 440.
http://www.koenig-specials.com/mercedes/mb-w126sec.html#Anchor-50867
Richard

SmaartAasSaabr
04-04-2005, 09:22 PM
Then I'll go buy a 572 (http://www.gmgoodwrench.com/perfpartsjsp/partlist.jsp?section=ce&cat=9274)-R

http://www.gmgoodwrench.com/perfparts/images/parts/large/12498793_large.jpg

720 horsepower
685ft/lb torque. :twisted:

marlinspike
04-04-2005, 09:34 PM
That's nothing. I'll get me a Hardcore Merlin 632 with aluminum heads

http://www.primediapowerpages.com/isroot/ePages7/Images/103931/103931-1014868.jpg

800hp 775lb-ft


and I'll figure a way to stick her in a Model A. MUHAHAHAHAHA
Richard[/i]

jimbonzzz
04-04-2005, 09:46 PM
I love my 4th gen fbody for this reason too but more so for the 350 under the hood and sleek styling.

Yeah, 4th Gen fbody! http://img.photobucket.com/albums/v230/jimbonzzz/rock.gif
Is it a bird jbird? http://img.photobucket.com/albums/v631/miclogger/Smilies/thumb.gif

http://img.photobucket.com/albums/v230/jimbonzzz/Cars.jpg

marlinspike
04-04-2005, 09:47 PM
Why have a non-ram air when you have a ram air?

SmaartAasSaabr
04-04-2005, 09:51 PM
That's nothing. I'll get me a Hardcore Merlin 632 with aluminum heads

http://www.primediapowerpages.com/isroot/ePages7/Images/103931/103931-1014868.jpg

800hp 775lb-ft


and I'll figure a way to stick her in a Model A. MUHAHAHAHAHA
Richard[/i]

Ah screw it, I'll drive down the street and pick up a real motor.
http://www.rolls-royce.com/defence_aerospace/products/vr/f136/f136_vr.html

40 000lb of thrust :D

marlinspike
04-04-2005, 09:54 PM
Ok, then I'll attach this to a bicycle
http://www.bath.ac.uk/~ccsshb/12cyl/

108,920hp and 5,608,312 lb-ft...ooorah
Richard

jimbonzzz
04-04-2005, 10:14 PM
Why have a non-ram air when you have a ram air?

The non-ram air is my daily driver. :D

Veil Guy
04-04-2005, 10:18 PM
Regis,

I appreciate your skepticism - I hear it all the time so, no worries.

Veil should work especially well with your application for the following reason:

Untreated headlights are transmissive in nature - by definition. The amount of laser return is dictated by the focusing concave internal lighting structures. They work liek a satellite dish collecting and focusing light energy.

When Veil is applied to the outer surface - the internals are eliminated from the equation and what is left as a reflective source is the outer surface [of the headlight] which now becomes a poor reflector that directs the laser energy away from the source [the police officer].

Good luck with whatever you do and welcome to the forum!

The Veil Guy 8)

marlinspike
04-04-2005, 10:18 PM
Well, I still don't get it since the ram air isn't exactly not streetable...either way you need this http://www.vortechsuperchargers.com/products/yourcar/01-02fbody.html
Richard

jimbonzzz
04-04-2005, 10:54 PM
Well, I still don't get it since the ram air isn't exactly not streetable...either way you need this http://www.vortechsuperchargers.com/products/yourcar/01-02fbody.html
Richard

That would be nice, then I could say bye bye to all the Cobras :D

Regis
04-06-2005, 12:42 AM
Thanks for the response Veil guy. I don't know why, but I suppose it never really occured to me that the reflection was actually created on the concavity and not the glass/plastic headlight cover. I ordered a can/bottle/tube/?? of Veil today from Roy (or hopefully an employee given the very feminine voice on the phone.. :D ). I based the purchasing decision on three things..

- Your knowledge, thoughts, customer service and enthusiasm illustrated on these boards
- Roy's performance evaluations/reviews
- Seems perfectly plausible to me..

If it works as well as I hope, let me know how to invest in your company.. :)

Cheers!

Veil Guy
04-06-2005, 10:49 AM
Thanks for your kind words.

I ran into some similar skepticism with respect to sport-touring bikes - which really benefit from VEIL.

Untreated, headlight covers and the like are transmissive (like windshields) - that's why you can see throught them (obviously.)

The internal collectors are the source of the reflection/concentration of laser light.

Good luck with it.

Regards,

The Veil Guy 8)

brick
04-06-2005, 11:43 AM
In that case, I wonder what would happen if I painted the back side of the headlight lense instead of the front? (I'd need a cleaner workspace than I have to do it, but mine are easily removed.) That might take care of my short-term pitting/chipping/scratching problem. My only concern would be higher heat loading from proximity to the halogen bulb.

happya$$
04-06-2005, 11:47 AM
In that case, I wonder what would happen if I painted the back side of the headlight lense instead of the front? (I'd need a cleaner workspace than I have to do it, but mine are easily removed.) That might take care of my short-term pitting/chipping/scratching problem. My only concern would be higher heat loading from proximity to the halogen bulb.

Brick I have been thinking about doing the same thing. The only difference is that I want BOTH sides Veiled. Any thought Bob?

brick
04-06-2005, 12:27 PM
Brick I have been thinking about doing the same thing. The only difference is that I want BOTH sides Veiled. Any thought Bob?

Doing both sides is probably a good call, but I'd be worried about diminishing light output. If it looks like my license plate cover I might have second thoughts.

I think what I'm more concerned about is the possibility of the coating emitting vapors at high temp which might attack the mirrored finish on the reflector. Or charring, catching fire, or whatever other catastrophic failure Murphy's Law can provide. I suppose I could let a small amount set-up on a glass jar or something and see what happens. Anybody have any idea how hot the inside of the lense on a halogen headlight might get?

Veil Guy
04-06-2005, 06:34 PM
I would tend to stay away from it as unnecessary.

One good coat of VEIL on the lights, is more than enough.

The only reason I suggest the possibility of two coats on retro-reflective plate covers is to overcome the 900x light magnification effect of those plates.

The Veil Guy 8)

Veil Guy
04-06-2005, 06:36 PM
brick,

The other may be the glare of the headlight cover (glass or otherwise).

If the outer surface is glossy/glaring that could diminish the stealth effect.

That's why VEIL is not glossy.

The Veil Guy 8)