View Full Version : Veiled my plate only 8 times!
sethy
04-08-2005, 11:23 AM
Ever want to know how many times you can veil your plate until they acnt get a reading on your plate? ;)
http://69.133.113.105/pics/veil.jpg
http://69.133.113.105/pics/veil2.jpg
However, I think this is a tad to dark for my local police's taste...
brick
04-08-2005, 11:53 AM
April fools? :shock:
Dude, Rustoleum is cheaper. Home Depot. $5.
Sethy, please tell me you're kidding!!! OMG that is dark. I remember Veil guy said that applying more then 1 or 2 coats won't give you anymore protection.
Chris
Veil Guy
04-08-2005, 02:46 PM
Sethy,
You are outta control! (Grin)
You might as well take the bloody plate off the front of your vehicle all together! :lol:
I bet THAT setup BEATS PHOTORADAR,
JTW, is spot-on - one/two coats max and thats only needed for highly retroreflective paints.
Honestly, when VEIL is everywhere else, the diffuser may be able to do its job effectively or one coat of VEIL with the laserdiffuser.
At the appearance you have, it looks like you might as well use black primer paint.
At any rate, I would say you're protected!!!
The Veil Guy 8)
sethy
04-08-2005, 03:58 PM
April fools? :shock:
Dude, Rustoleum is cheaper. Home Depot. $5.
Nope, its veil. Bad part is I can't use it because it is to dark now so I dont know what im going to do with it...
Veil Guy
04-08-2005, 04:37 PM
Sethy,
What possessed you to do this? :lol:
At least its good to know how many potential treatments one can get out one container of VEIL?
I bet you that 99.999999999999999999999999999% of laser is absorbed by this plate.
Perhaps NASA can use it when they send orbitals toward the sun.
I think you have come up with the equivalent of SPF 10,000! 8)
In all seriousness, though, you have may be on to something here.
I have tested light coloured vehicles like yours with a two-coated VEIL'd plate cover with no plate behind it and mounted it on the front.
This does further reduce the ability of laser guns to get a speed reading than just using VEIL on the lights. Since a good portion of the front bumper where LIDAR operators tend to target is eclipsed by the VEIL coating!
The Veil Guy 8)
sethy
04-08-2005, 05:54 PM
Anyone want a free cover? Im afriad I cant use it because you can't read anything :)
crazyVOLVOrob
04-16-2005, 08:47 PM
Anyone want a free cover? Im afriad I cant use it because you can't read anything :)to bad you can easily clean it and it will be as good as new
sethy
04-16-2005, 10:05 PM
I dont think i can removie that much veil...
crazyVOLVOrob
04-17-2005, 12:20 AM
Ok then try soaking it in Everclear liquor (190proof) it might work
but if you can't get that try 151
Or ask one of your friends who is a chemistry major to try to get it off he has access to the good cleaning stuff,
stealthJamal
04-17-2005, 12:36 AM
Soak it in Amonia and then scrub it with Amonia that will clean it off.
sethy
04-17-2005, 12:37 AM
everclear is actually 180 proof ;)
crazyVOLVOrob
04-17-2005, 12:40 PM
everclear is actually 180 proof ;)thanx i wasn't sure. I have heard 160-190
SmaartAasSaabr
04-17-2005, 05:54 PM
Ever get a mouthful of that stuff, a lighter and spit it out? :D
brick
04-17-2005, 07:00 PM
Ever get a mouthful of that stuff, a lighter and spit it out? :D
I saw a kid put a lighter to the end of a [almost] empty bottle. It went off like a rocket engine. Only problem was his hand was just a bit too close and he burned himself pretty badly. Oops :oops: .
theresa
05-09-2005, 12:35 AM
Ok then try soaking it in Everclear liquor (190proof) it might work
but if you can't get that try 151
Or ask one of your friends who is a chemistry major to try to get it off he has access to the good cleaning stuff,
Wouldn't that just eat the plastic?
sethy
05-09-2005, 12:37 AM
everclear is actually 180 proof ;)
Actually I was wrong. Its 190, 95% alcohol.