Ok so I left my RD in my truck for no more than an hour, come back, and the thing is malfunctioning. First off, the screen was blank, but it turned on and was picking up Ka from a NPD cruiser going the opposite way. While I was driving, I hit the power button, and hit the display buttons and it comes back to life. I turn it off, and unplug it from the cig lighter socket, and turn it on again. Now it boots through the fast boot up sequence that I had it at, but instead of going to Highway or City LoX, it goes to a screen with a C and the voltage reading. I can switch back and forth between Highway and City, but instead of LoX, I have NoX now....Very Wierd. I tried to reprogram it, and it flashes Program quickly, then makes the lazer alert sound for about 4 seconds. Im not sure what to do, figure I'd try the boards here first because it might be a simple fix, and then call Beltronics tommorrow to see what the deal is. I have a video of all of this, but since I had to reformat my comp, im trying to make it where the camera can be seen by vista, gimme a little bit and I'll try to have it up soon. Thanks guys!
Bookmarks