Need Dimensions for the M*7 Heads

**bopbop** · 09-07-2009, 08:45 AM

Hello,

I need dimensions of the heads for the M*7. I need to make a mock up model so I can figure out where to put it in the rear.

Don't have too many options in the rear of my car, and I still undecided if I should just get the 2 heads over the 4 heads.

How important is the rear protection, is it necessary to put 2 heads in the rear?

My car is honda accord 95.

**robcollins5** · 09-07-2009, 08:49 AM

Firstly, the dimensions can be found at the Blinder website. If memory serves me correctly they're 18x54x108mm. Secondly, they're actually not rectangular in nature. The back side is rectangular but where the "head" meats the "base" begins a "conical" effect...kind of slanting inward from both the top and the bottom so that the "eye" is actually not as tall as the backside. They would be difficult to mock up and plan for, honestly. I would wait until you get them if I were you.

rc

P.S. I made a mock up and cut my grill based on it. Now I'm not using the holes that I cut in the grill. epic Fail.

rc

**bopbop** · 09-07-2009, 09:00 AM

I just need to get an idea where to put it, and I do not want this to be sticking out so much.

Thanks!

**robcollins5** · 09-07-2009, 09:05 AM

Originally Posted by bopbop

...and I do not want this to be sticking out so much.

Thanks!

Functionality and Cosmetics create a very fine line when working with Countermeasures. You've got to give to get both ways. Keep in mind that your jammer heads need nothing ahead of them: above, below, or to the sides, to work seamlessly.

rc

**bopbop** · 09-07-2009, 09:10 AM

can u get the 4 heads and just use 3? 2 in front and 1 in rear? just to cover the plates?

Can they shoot the tailights and still get you for it?

**BlinderGuy** · 09-07-2009, 09:30 AM

Originally Posted by bopbop

can u get the 4 heads and just use 3? 2 in front and 1 in rear? just to cover the plates?

Can they shoot the tailights and still get you for it?

Yes you can use 3 front and 1 rear. I have several customers who have done this. While one head on the rear is not optimal for jamming it is better than the one rear head of the Zr4 in my opinion. We did some testing with Z1only from this forum and the one head on the rear did respectable against the PL3 and LA. It was with the Truspeed and Ultrylite that it did get P/T...Not horrible but it is P/T regardless.