damn, ELVATO is right.
i popped mine open to see what fuse it is and there is none.
the power wires go directly to a small circuit board.
that pretty much sucks. no protection from a bad cig lighter.
you're only option now is to either get a hold of a different one, which sounds like that may not be easy, or try making a direct wire cord with a fuse and see if it will power up.
maybe someone there has a Bel, since they use the same cord. STI and RX-65 anyway.
that, or find a way to see if you have power coming out of the cord, but that will require a 12v tester and a bare phone outlet plug, so you can touch the tester to it. easier than trying to touch between the connectors in the small plug end.
good luck.
Bookmarks