Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22
  1. #11
    Experienced
    Join Date
    Aug 2005
    Location
    New Jersey/Saratoga NY
    Posts
    317

    Default

    Is there any special equiptment necessary for the install?

  2. #12
    Radar Fanatic
    Join Date
    Nov 2004
    Posts
    2,303

    Default

    Quote Originally Posted by yemntftb
    Is there any special equiptment necessary for the install?
    Screwdriver, wirestrippers (or a decent knife), and depending on how it would be wired up in your vehicle, electrical tape or possibly heat-shrink tube is helpful, along with some zip ties. All pretty basic stuff.

    I did mine in about 20 minutes with nothing but a screwdriver, wirecutters, two crimp-on wire connectors and tool, and a little tape.

  3. #13
    Experienced
    Join Date
    Aug 2005
    Location
    New Jersey/Saratoga NY
    Posts
    317

    Default

    what did you use as the electrical source?

  4. #14
    Radar Fanatic
    Join Date
    Nov 2004
    Posts
    2,303

    Default

    Quote Originally Posted by yemntftb
    what did you use as the electrical source?
    I tapped the switched lead going to the stereo since I already knew what color it was, but there's many possibilities. On some vehicles, the lighter goes on and off with the key, that's often an easy one too.

  5. #15
    Newcomer
    Join Date
    Oct 2005
    Location
    Memphis
    Posts
    9

    Default

    you dont even have to route it all the way to the fusebox if your car has an overhead console. One of those things that tell you the temp/compass. I just wired my V1 to that in my 05 Tacoma

  6. #16

    Default

    Where are you in NJ? Stop by my place this weekend, it's supposed to be nice weather. We'll have that X50 hardwired in about five minutes. I'm in Edison. Bring the kit from Roy! It includes a remote mute button and a fuse built-in.

  7. #17
    Experienced
    Join Date
    Aug 2005
    Location
    New Jersey/Saratoga NY
    Posts
    317

    Default

    I live out near morristown, but I'm up at college now, I would be willing to do that in a few weeks once I get on thanksgiving break, I also need to order the smartcord, which I'm doing today.

  8. #18
    Newcomer
    Join Date
    Jul 2005
    Location
    Houston, TX
    Posts
    42

    Default

    Quote Originally Posted by JamSession
    Quote Originally Posted by yemntftb
    so if I order the smartcord for the 8500 and take it over to bestbuy they can hardwire it for me? Or is it easy enough to do it myself... I no for a fact that the subaru does not have any electronics in the rearview mirror, the auto may have auto dimming but I'd have to look into it as the car is not with me with right.
    I would not pay anyone to hardwire the detector as anyone with a minimal understanding of automotive electronics should be able to do it themselves. I hardwired mine in 30 minutes and I am by no means an electrical engineer. Believe me when I tell you it is not hard. Several years ago I had a Subaru Outback which I hardwired my V1 to and it was no different than any of the other 8 vehicles I've hardwired over the years. The easiest way in my opinion is to run the positive lead to your fusebox under the steering column. Remove the fuse for your radio, insert the positive wire, then reinsert the fuse. Then find a good ground which will not be that hard for your ground wire. The rest of the install will be purely cosmetic as you try to hide the wire and decide where to position the detector. I have always mounted it on my visor because it is harder to spot from outside and it is also somewhat protected from heat and direct sunlight. Keep your money in your wallet and give it a try

    Ed
    Could I use a regular phone wire to hardwire it this way? Will it use the same fuse as the stereo? Or will I still have to purchase a hardwire kit with the fuse built-in?

  9. #19

    Default

    Quote Originally Posted by SCjohn
    Could I use a regular phone wire to hardwire it this way? Will it use the same fuse as the stereo? Or will I still have to purchase a hardwire kit with the fuse built-in?
    1. Yes.
    2. 50/50. Depends which end of the fuse you tap. Scary, right?
    3. You should.

    Remember the kit also comes with a remote alert light/mute button, so it's not a total waste of money.

  10. #20
    Experienced
    Join Date
    Aug 2005
    Location
    New Jersey/Saratoga NY
    Posts
    317

    Default

    yeah the remote seems like a good idea.

 

 

Similar Threads

  1. Beginner to the Radar Detector Scene!
    By DanOpi in forum Introduce Yourself
    Replies: 5
    Last Post: 03-23-2013, 05:18 PM
  2. Replies: 2
    Last Post: 06-09-2011, 09:34 AM
  3. Beginner scanner question.
    By jeef in forum Scanners, Ham Radios, & CB's
    Replies: 4
    Last Post: 07-14-2010, 05:48 AM
  4. Hardwire using fusebox questions
    By lordhawhaw in forum Valentine One
    Replies: 12
    Last Post: 05-31-2008, 11:42 PM
  5. Beginner looking for Scanner and Understanding
    By Indiana Jones in forum Scanners, Ham Radios, & CB's
    Replies: 14
    Last Post: 02-14-2007, 11:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •