Hi, First time here so please excuse me if this is not the right way to seek assistance from the forum. I am an avid motorcycle rider and have for many years used a Valentine1 detector connected to a Cheetah RadarNode and Vizalert2 in helmet display. This setup has served me well until I recently misplaced the RadarNode cable that connects between the Valentine1 and the RadarNode unit. I have tried to find information on these units but they are no longer available and I have been unable to find the pin-out of this particular cable. From memory it has a jumper between 2 pins on the RadarNode end of the cable and it was labelled clearly on each end as it is not symmetrical and must be installed the correct way around. If anyone can supply me the correct cable pin outs for this cable I will be most grateful.
Bookmarks