Passport SRX control box and antenna pinout

[KustomEagle]

anyone have pix of the inside of their SRX or SR7 control box...

I aquired lucky's broken srx and found a burnt component inside the control head. I can't read the number on it as its pretty badly burnt so i'm hoping someone else has pix or can take some pix of it so i can replace the burnt whatever it is...


also the radar head's plug is cut off and I need the pinout of it if someone can snap a pic or read the colors and orientation of the wires in the 4 pin plug...

if you can help me out i'd love you forever! and if you could aim me at "honda of fury"

[REBinc]

Is control head the interface or display? I'll see what I can get for you when I go home.

[KustomEagle]

Is control head the interface or display? I'll see what I can get for you when I go home.

interface i guess would be more accurate... where all the components plug in. need pics of:
-Pinout and orientation of the radar head
-inside of interface box; burnt component in the middle of the two jammer plugs... 6 pin smt only 2 numbers readable on mine "43xxx" looks like

[REBinc]

I couldn't get to it tonight, its kind of hidden in my car. I will take pictures of it tomorrow when I have to take it all apart anyways.

[KustomEagle]

I couldn't get to it tonight, its kind of hidden in my car. I will take pictures of it tomorrow when I have to take it all apart anyways.

Yay you're my hero!

i got the pinout of the radar antenna figured out as lucky found his post explaining it now i just need to find a picture of that burnt chip to get teh part number off of and find or build a replacement circiut...

i'm pretty sure its the voltage regulator as it seems the laser and radar heads dont get any juice when plugged in and powered up. I just get the message "check reciever wiring"

[Lucky225]

Yay you're my hero!

i got the pinout of the radar antenna figured out as lucky found his post explaining it now i just need to find a picture of that burnt chip to get teh part number off of and find or build a replacement circiut...

i'm pretty sure its the voltage regulator as it seems the laser and radar heads dont get any juice when plugged in and powered up. I just get the message "check reciever wiring"

Hrmm.. Wonder who's srx that once was

[KustomEagle]

Hrmm.. Wonder who's srx that once was

first post!

i said it was yours!

[Lucky225]

lol my bad =)

[KustomEagle]

i'm trying to get some macro shots w/ my buddies DSLR but we haven't been able to coordinate our timing yet...


also i think a zr3 or zr4 control box would have the same chip so if anyone has one of those handy you might take a look for me i'd greatly appreciate it

[KustomEagle]

Here is the pic:

The left pair of plugs are for the laser jammers and the burnt chip is the one in the middle of those in front of (or behind) the plugs... i dont have ps or anything to outline the burnt chip but you should be able to tell which one it is. There was a little piece on that chip to the right that was burnt but had an A on it and the left part said 435... so the part number might be "435A" but that didnt pull anything up so i'm betting its missing a number or letter... the chip itself is an soic-6 package and pin 1 connects to the 12v line right after it comes out of the RP protection diode

the cam i'm using doesn't seem to have a macro function and my buddy with the DSLR hasn't made an appearance yet...

either way anyone with an srx box if you can open yours up and snap a pic or two or at least give me the part number off that chip i'd be forever greatful!!!