Results 1 to 5 of 5
  1. #1
    Radar Fanatic
    Join Date
    Jul 2006
    Location
    North Bay, CA
    Posts
    1,705

    Default GPS to prevent false alerts

    I am thinking about making a program that checks using GPS if there is a common false alert under a certain frequency, and if so the radar detector will still go off, but will be quiet and list it as a false alert.

    So let’s say on your way to work every day you drive past the same shopping center and the same false alarm goes off every day in the same spot. Would it be a good idea to have GPS record that spot with the false alert, and after it goes off enough times in the same spot it will automatically remember it in a database as a false alert so the annoying beeping of the radar detector does not go off in that spot any more?

    Does anyone know of any software that does this? If I get the time I might do it myself if I can not find anything I am satisfied with in the distant future.



    I was thinking of using my bel rx65 pro’s speaker output jack as a way to plug it into a gps device. Just make a program that detects through the speaker input jack on a computer. If a tone goes off then it will, check and log the coordinates via gps, and then output it via its speakers. An easy way to use a radar detector without opening it up.




    Suggestions, comments? Thanks.

  2. #2
    Speed Demon
    Join Date
    Jun 2005
    Location
    Computer interfacing!!
    Posts
    538

    Default

    Check out the Uniden GPSRD. It has a GPS that logs falses and traps. You may want to follow their lead and add a threshold feature to the falses. That way it will alert if you encounter a threat that is above the avg level of the false in your database. LEO's can be sneaky!

  3. #3
    Radar Fanatic
    Join Date
    Jul 2006
    Location
    North Bay, CA
    Posts
    1,705

    Default

    That is awesome!

    I wonder how good it picks ka up though.

    All the cops in this area are ka only. I am lucky.

  4. #4
    Speed Demon
    Join Date
    Jun 2005
    Location
    Computer interfacing!!
    Posts
    538

    Default

    Detection is poor. The strongest signal is always heard, unlike modern detectors that alert to Ka, then K then X regardless of signal strength. The GPS features are the best. If I could disable the radar functions, so that it would not interfere with a modern detector, I would leave up the GPSRD just for the HUD display of speed and direction.

  5. #5
    Speed Demon
    Join Date
    Jun 2005
    Location
    Computer interfacing!!
    Posts
    538

    Default

    BCT-15 in concert with a good radar detector is probably what you need:

    From the manual.


    Non-Radio Location Based GPS Features
    When connected to a GPS, you can program specific location information which will trigger an alert from the scanner. The scanner becomes an extension of the GPS device.
    The following geographical values are typical of use you might find valuable while traveling. Use the menu (begin with Program Location) to input the necessary data to enable each.
    •Dangerous Xing — Stores location, speed, and direction of travel. If you are in range, traveling greater than the set speed, and moving in the selected direction, the radio sounds an alert at .5, .25, and .1 miles (radius of a circle) from the point. These range distances are automatic and fixed.
    •Dangerous Road — Stores location, direction of travel, and speed. If you are traveling at a speed greater than that specified, in the direction specified, and if you are within range of the set location, the scanner sounds an alert at .5, .25, and .1 miles from the point. These range distances are also automatic and fixed.
    •Points of Interest (POI) — Stores location and range. If you approach the set location, the radio sounds an alert up to 2 miles from the center.

 

 

Similar Threads

  1. false alerts with LI?
    By muledoe1 in forum Laser Interceptor
    Replies: 5
    Last Post: 12-09-2011, 05:25 AM
  2. Replies: 1
    Last Post: 03-23-2009, 11:24 AM
  3. False Alerts Verus Real Alerts
    By Twista in forum Radar Detectors - General
    Replies: 11
    Last Post: 02-25-2007, 05:32 PM
  4. POP false alerts on KA or K?
    By h2m in forum Valentine One
    Replies: 6
    Last Post: 03-23-2006, 09:43 AM
  5. False Alerts
    By LoneRegister in forum Valentine One
    Replies: 1
    Last Post: 01-22-2006, 10:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •