Results 1 to 10 of 10

Thread: LPP kit

  1. #1
    Speed Demon
    Join Date
    Mar 2006
    Location
    All over FL (305,786,352)
    Posts
    560

    Default LPP kit

    So you guys won't be selling the kit for LPP??

  2. #2
    Cheetah Rep
    Join Date
    Feb 2005
    Location
    Phoenix, Arizona
    Posts
    2,567

    Default


    i was wondering who would ask first.

    At this time, no.
    Eventually, yes.

    here's the deal with the AL and LPP.

    the original AL worked fine, however since that it has gone through many changes, causing the Cheetah guys to play catch up. every time they spent the time and money to get it working, things got changed again.
    Now with LPP on its own, things may change again.

    Once thing settle in, and the AL and LPP have a consistent unit in terms of the output connections needed, Cheetah will have a connector cord available and a working LASERnode for it.

    Kind of a bummer, since i was hoping to user them to connect my AL's.
    That's okay, i did it the old fashioned way. (climbing under my truck and routing cords everywhere)

    As a side note, the current LASERnode is universal and works with Blinder and Lidatek. you would just choose whatever connector cord you need.

  3. #3
    Speed Demon
    Join Date
    Mar 2006
    Location
    All over FL (305,786,352)
    Posts
    560

    Default

    It had to be me

    Cool thanks

  4. #4
    Speed Demon
    Join Date
    Sep 2006
    Location
    WA
    Posts
    511

    Default

    Quote Originally Posted by RacerX
    ...
    Once thing settle in, and the AL and LPP have a consistent unit in terms of the output connections needed, Cheetah will have a connector cord available and a working LASERnode for it.

    Kind of a bummer, since i was hoping to user them to connect my AL's.
    That's okay, i did it the old fashioned way. (climbing under my truck and routing cords everywhere)

    As a side note, the current LASERnode is universal and works with Blinder and Lidatek. you would just choose whatever connector cord you need.
    Let me see if I understand you correctly. I purchase a kit for the Blinder and install it. Later, I change to LPP/AL (let's say I move the Blinder to another vehicle with cords running all over the place et al). Then all I need to get is the connector cord for the LPP/AL and hook it up. Right?

  5. #5
    Speed Demon
    Join Date
    Mar 2006
    Location
    All over FL (305,786,352)
    Posts
    560

    Default

    Quote Originally Posted by LittleOverPSL
    Quote Originally Posted by RacerX
    ...
    Once thing settle in, and the AL and LPP have a consistent unit in terms of the output connections needed, Cheetah will have a connector cord available and a working LASERnode for it.

    Kind of a bummer, since i was hoping to user them to connect my AL's.
    That's okay, i did it the old fashioned way. (climbing under my truck and routing cords everywhere)

    As a side note, the current LASERnode is universal and works with Blinder and Lidatek. you would just choose whatever connector cord you need.
    Let me see if I understand you correctly. I purchase a kit for the Blinder and install it. Later, I change to LPP/AL (let's say I move the Blinder to another vehicle with cords running all over the place et al). Then all I need to get is the connector cord for the LPP/AL and hook it up. Right?
    You would need another central box where you connect the AL/LPP to (I think)

  6. #6
    Cheetah Rep
    Join Date
    Feb 2005
    Location
    Phoenix, Arizona
    Posts
    2,567

    Default

    venexoz is right. you would need another box (LASERnode) and connector, for the reasons stated above if you bought a Blinder kit right now.

    Down the road once the AL and LPP are added to the latest LASERnode and someone has one of those LASERnodes, then yes, you would only need a new cord to transfer the kit to a vehicle with the different jammer.

  7. #7
    Professional
    Join Date
    Mar 2006
    Location
    UK & USA
    Posts
    813

    Default

    That's right.

    The LASERnode transmitter comes pre-programmed with the software for each of the compatible jammers and it intelligently recognises which jammer type it is connected to.

    Obvoiusly different jammer manufacturers use different connectors so we make different cables for each one.

    If you swap jammer brands, you just buy a new, inexpensive cable, plug it in instead of the buzzer and away you go. Currently the LASERnodes have the software for the Blinder M20/M40, Lidatek LE30 and the Target LT400.

    Software for the latest versions of LPP/AL software are in the development programme and will be included from next year.

    AL

  8. #8
    Professional
    Join Date
    Sep 2005
    Location
    Wisconsin
    Posts
    958

    Default

    im pretty sure i know the answer is no, but this system wont work with the ZR3, correct?

  9. #9
    Advanced Member
    Join Date
    Feb 2005
    Location
    Southern MA
    Posts
    10,127

    Default

    Quote Originally Posted by Mackid343
    im pretty sure i know the answer is no, but this system wont work with the ZR3, correct?
    nope...not yet at least

    Spoiler: show

    Radar Detectors-V1 & BEL v995
    Laser Jammer-Laser Interceptor Quad
    GPS Camera Locator-Cheetah C100
    GPS Nav-Garmin nuvi w/Trapster
    CB Radio-Galaxy DX-949 w/Wilson 500
    Scanner-RS Pro-96

  10. #10
    Professional
    Join Date
    Mar 2006
    Location
    UK & USA
    Posts
    813

    Default

    Let me give you an analogy to explain how the wireless transmitter part of the kit works and that should help.

    A laser jammer identifies the individual profile of the pulse rate of an incoming laser beam. Then it's software looks up a table of the different profiles of all the various laser guns and when it finds the right gun it fires back it's own beam at the appropriate pulse rate to jam the gun.

    Our wireless transmitter kind of does the same thing but instead of looking at pulse rates of a laser beam, we're looking at the unique profiles of the audio output that comes from a laser jammer when it's firing. The software then identifies the individual jammer it's been connected to and sends out a coded radio signal to our other devices to tell them that the jammer is going off. The product is designed in that way to ensure customers using the GPS mirror, ActiveStealth or the VizAlert can connect reliable jammers and not some of the ones out there that don't work.

    We can add in the profile of any jammer to make them compatible with the Cheetah products. We had to start somewhere so for now it works with Blinders, Lidateks and Targets. We did have the profile for LPP/AL included aso but its audio profile changed several times between the various revisions this year so the transmitter doesn't recognise the jammer. It's the same principle why a laser jammer can't jam a brand new laser gun that it doesn't recognise.

    We can add in new jammer profiles later in 2007 if there is sufficiant demand is there but our development engineers are engaged elsewhere on other projects for now.

    Hope that helps.

    Al

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •