Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    ES13Raven
    Guest

    Default Detector Audio / Earphones?

    If you use earphones of some kind for your detector, how do you have it setup?

    Do you have earphones installed in your helmet?

    Do you put small earphones inside your ear, and then put on your helmet?

    Do you have the cord (hanging) plugged directly into the detector, or do you route it through the bike?

  2. #2
    Radar Fanatic
    Join Date
    Nov 2005
    Posts
    1,534

    Default

    I just use the ear-jack supplied with the RD. My STi is pretty loud anyway on full volume, so also, if i use an ear plug in the other ear, it's all good :wink:
    RR

  3. #3
    Newcomer
    Join Date
    Jan 2007
    Location
    UK
    Posts
    35

    Default

    I just use an ordinary set of earphones (sony) that came with my mp3 player. I just put the left one in and then put my crash helmet on. The earphones connect to the Cheetah wireless unit I have in my inside jacket pocket.

  4. #4
    Good Citizen
    Join Date
    Mar 2007
    Location
    Tomball
    Posts
    178

    Default

    Ive found that hearphones HURT no matter how good...

    i wear ear plugs and then have my valentine one connected
    to my autocom intercom system...i set the balance to the
    FRONT (driver/rider) so the passenger never hears the detector.

    ive used my autocom system on sport bikes and touring bikes.

  5. #5
    Speed Demon
    Join Date
    Nov 2006
    Location
    USA
    Posts
    645

    Default

    They need some kind of system where you can put little pads on your hands and it'll vibrate if you get an alert .

  6. #6
    Yoda of Radar
    Join Date
    Nov 2005
    Location
    NY
    Posts
    11,015

    Default

    Quote Originally Posted by marker227
    They need some kind of system where you can put little pads on your hands and it'll vibrate if you get an alert .
    Mehhh...

    Too much road vibration IMHO... especially for sportbikes who already have a bit stiffer suspension then ur average cruiser, it may be a bit tough to feel, especially after ur hands go numb from riding them for to long .



    I had a magazine once... where for like ~50bucks there was a unit (about the size of your average 'shift' key)... and it had 3(I believe) rather decent sized LEDs. You plugged it into your RD's headphone output jack (Belscort/V1) and the LED's would light up. I always wanted to give it a try... it seemed as if you could stick it above ur gauge cluster and it would work well.



    As for now... I use the earplugs which fit into ur ear. (It converts the mono output to 'stereo'.)

  7. #7
    Good Citizen
    Join Date
    Mar 2007
    Location
    Tomball
    Posts
    178

    Default

    there is a "system" called HARD (Helmet Assisted Radar Detection)
    its avail from legal speeding (too)...

    http://www.legalspeeding.com/products.htm#HARD

  8. #8
    Yoda of Radar
    Join Date
    Nov 2005
    Location
    NY
    Posts
    11,015

    Default

    Please do not post websites that compete with the owner of this website ( as Roy also sells that product on his website).

  9. #9
    Good Citizen
    Join Date
    Mar 2007
    Location
    Tomball
    Posts
    178

    Default

    sorry..didnt realize the "rule"...
    btw whos cheaper...my link or radar f'in roy ?

  10. #10
    Speed Demon
    Join Date
    Nov 2006
    Location
    USA
    Posts
    645

    Default

    Then how about an electrical current .

    Quote Originally Posted by AirMoore
    Quote Originally Posted by marker227
    They need some kind of system where you can put little pads on your hands and it'll vibrate if you get an alert .
    Mehhh...

    Too much road vibration IMHO... especially for sportbikes who already have a bit stiffer suspension then ur average cruiser, it may be a bit tough to feel, especially after ur hands go numb from riding them for to long .



    I had a magazine once... where for like ~50bucks there was a unit (about the size of your average 'shift' key)... and it had 3(I believe) rather decent sized LEDs. You plugged it into your RD's headphone output jack (Belscort/V1) and the LED's would light up. I always wanted to give it a try... it seemed as if you could stick it above ur gauge cluster and it would work well.



    As for now... I use the earplugs which fit into ur ear. (It converts the mono output to 'stereo'.)

 

 

Similar Threads

  1. Car Audio ???
    By Freebird in forum Car Talk
    Replies: 19
    Last Post: 04-20-2009, 10:38 AM
  2. Converting audio mute signal to real audio signal?
    By 2001Concours in forum Blinder Laser Jammers
    Replies: 5
    Last Post: 06-26-2007, 01:16 PM
  3. combining detector audio
    By maxim in forum Radar Detectors - General
    Replies: 8
    Last Post: 07-15-2006, 11:00 AM
  4. Bel STi audio
    By D.E.T in forum Beltronics
    Replies: 6
    Last Post: 05-11-2006, 12:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •