Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Newcomer
    Join Date
    Apr 2007
    Posts
    17

    Default Laser Interceptor Hype

    The LI tests look good but an independently purchased unit needs to be tested. I'd also like to see it have at least a year's worth of field time to see how reliable it will be and how the company responds to complaints.

    In the interim, I recently bought a Blinder M20. Here are my reasons:

    1) It appears to be the most reliable hardware of the units I've read about.
    2) The unit is LED based which is safer for other drivers during operation.
    3) The unit is completely sealed against weather which is critical in regions with lots of rain and snow.
    4) They have the best warranty.
    5) They don't operate as if they are based out of a garage in Eastern Europe.
    6) LEDs are less prone to failure and can't be overdriven and burned up like diodes.

    I read the GOL tests. They look like they did a very good job. I do have one criticism though. JTG is funny, but is not really the goal of a laser jammer. For me, a jammer gives me a few precious seconds to respond and slow down. I only need the jammer to work for about 10 seconds and then I don't care if they get a speed reading.

    With this in mind, I'd propose that the GOL tests include not only JTG tests, but something more realistic. I'd like to see a testing protocol that had reading points at 250 ft. intervals. So you'd try to get a speed reading at 1500, 1250, 1000,....250 ft. You'd have ten seconds to get a speed reading. If you couldn't get a reading in that time and the driver gets a warning of the laser gun activation for the entire 10 seconds then I'd say the jammer passes the test.

    Thoughts?

  2. #2
    Founder of Stealthvation
    Join Date
    Dec 2004
    Location
    Cleveland, Ohio
    Posts
    11,174

    Default Re: Laser Interceptor Hype

    Quote Originally Posted by XOR
    The LI tests look good but an independently purchased unit needs to be tested. I'd also like to see it have at least a year's worth of field time to see how reliable it will be and how the company responds to complaints.

    In the interim, I recently bought a Blinder M20. Here are my reasons:

    1) It appears to be the most reliable hardware of the units I've read about.
    2) The unit is LED based which is safer for other drivers during operation.
    3) The unit is completely sealed against weather which is critical in regions with lots of rain and snow.
    4) They have the best warranty.
    5) They don't operate as if they are based out of a garage in Eastern Europe.
    6) LEDs are less prone to failure and can't be overdriven and burned up like diodes.

    I read the GOL tests. They look like they did a very good job. I do have one criticism though. JTG is funny, but is not really the goal of a laser jammer. For me, a jammer gives me a few precious seconds to respond and slow down. I only need the jammer to work for about 10 seconds and then I don't care if they get a speed reading.

    With this in mind, I'd propose that the GOL tests include not only JTG tests, but something more realistic. I'd like to see a testing protocol that had reading points at 250 ft. intervals. So you'd try to get a speed reading at 1500, 1250, 1000,....250 ft. You'd have ten seconds to get a speed reading. If you couldn't get a reading in that time and the driver gets a warning of the laser gun activation for the entire 10 seconds then I'd say the jammer passes the test.

    Thoughts?
    I would at least have bought an M40 and make sure you pair it with Veil and a laser shield (if you have a front plate).
    RIP Duncan my BELOVED black lab son 8/7/99-3/23/11. I will miss you DEARLY.


    http://www.criminalcustomzshop.com/


    LET THE BIRTH OF MANY TESTING GROUPS HAPPEN!











    You want to know what it is like doing something for the love and passion and not for the mighty dollar then look up GOL!










    buyradardetectors rocks!

  3. #3
    Newcomer
    Join Date
    Apr 2007
    Posts
    17

    Default Re: Laser Interceptor Hype

    Quote Originally Posted by happya$$
    I would at least have bought an M40 and make sure you pair it with Veil and a laser shield (if you have a front plate).
    Got Veil. I'll be applying it to a front plate cover and headlights. I had thought about an M40, but the front grill of my car would have a hard time accommodating all the heads. We'll see how the M20 goes and maybe I'll add a couple heads.

  4. #4
    Speed Demon
    Join Date
    Mar 2007
    Location
    Zagreb, Croatia
    Posts
    512

    Default

    i realy dont see a link from topic name to topic... 8)

  5. #5
    Founder of Stealthvation
    Join Date
    Dec 2004
    Location
    Cleveland, Ohio
    Posts
    11,174

    Default Re: Laser Interceptor Hype

    Quote Originally Posted by XOR
    Quote Originally Posted by happya$$
    I would at least have bought an M40 and make sure you pair it with Veil and a laser shield (if you have a front plate).
    Got Veil. I'll be applying it to a front plate cover and headlights. I had thought about an M40, but the front grill of my car would have a hard time accommodating all the heads. We'll see how the M20 goes and maybe I'll add a couple heads.

    Either way you have one hell of a combo
    RIP Duncan my BELOVED black lab son 8/7/99-3/23/11. I will miss you DEARLY.


    http://www.criminalcustomzshop.com/


    LET THE BIRTH OF MANY TESTING GROUPS HAPPEN!











    You want to know what it is like doing something for the love and passion and not for the mighty dollar then look up GOL!










    buyradardetectors rocks!

  6. #6
    Old Timer
    Join Date
    Jan 2005
    Location
    Ohio
    Posts
    5,183

    Default

    Well, LED's can be overdriven like diodes...

    I will say this, I dont think the blinder is a good idea for larger vehicles, but so far it has been the most reliable jammers in the industry so far as lack of preformance (on my cavi)

    As of now, my AL's are starting to false, and those officers only target me for 6 or 7 seconds before they stop. I am starting to think they are getting readings and my AL heads are dying. I never had a problem like this with the m40.

    However, if the LA is used in your area- you are toast. I had JTG on everything but the LA when I had my lasershield, veil, and m40, but the LA cut right through it all like it was nothing.

  7. #7
    Old Timer
    Join Date
    Aug 2006
    Location
    Orlando, FL
    Posts
    8,880

    Default

    The though about JTG runs is that if a jammer can JTG, then it will provide those "10 seconds" you are looking for, at whatever distance you are targeted. If a jammer gets punch through at 500 feet, the theory goes that if you were targeted at 500 feet or less, they LEO will basically get an instant reading.

    WTH, safer for other drivers? It's not like you have LE-10s all over your car. From what I understand, most all the current diode jammers are "eye safe." Don't think you're going to be blinding someone soon Now if the same driver passes you all the time, while you jam the same laser trap every day....

  8. #8
    Newcomer
    Join Date
    Apr 2007
    Posts
    17

    Default

    Quote Originally Posted by ELVATO
    The though about JTG runs is that if a jammer can JTG, then it will provide those "10 seconds" you are looking for, at whatever distance you are targeted. If a jammer gets punch through at 500 feet, the theory goes that if you were targeted at 500 feet or less, they LEO will basically get an instant reading.
    The problem is the testing doesn't substantiate this result. It's only testing how long the gun remains confused from 1000+ feet to zero. It isn't testing whether the gun remains confused long enough to allow a typical driver to slow down. That's the test answer you really want.

    So again I understand JTG, but I think the testing methodology could yield good results from testing for JTG and testing at the typical firing distances for enough jam time to be effective even if JTG is not achieved.

    WTH, safer for other drivers? It's not like you have LE-10s all over your car. :lol: From what I understand, most all the current diode jammers are "eye safe." Don't think you're going to be blinding someone soon :lol: Now if the same driver passes you all the time, while you jam the same laser trap every day....
    In college I had a friend who did laser light shows. He had a 50mw Argon laser that could damage your eye faster than you could blink if it got you dead on or by reflection. Laser diodes today are easily that powerful and usually much more so. In the race to make the most powerful jammer I wouldn't be surprised if these vendors are putting out a large amount of power from these devices. The only way to tell is to get the proper equipment to measure the output.

    So there is a chance, however small, that you could be operating a laser device that could be dangerous because you don't know the output power of these units aside from what the vendor claims. Many of these units have self-test features that could harm your eyes or they could be reflected in rear view mirrors of other drivers and injure their eyes or back to you while driving and hurt you! Because the IR energy is invisible, your eye doesn't know it's being damaged and won't blink to protect itself.

    Not only that, but again it's easy to overdrive these devices and burn them out. Finally, I'm willing to bet that LEDs are far more reliable in the harsh application environment of an automobile being used in all weather and at highway speeds. It doesn't matter how powerful the jammer is if it is unreliable.

    I'm not trying to cause trouble, just posting some of my thoughts as I researched these devices and had to sort through all the laser diode hype.

  9. #9
    Newcomer
    Join Date
    Apr 2007
    Posts
    17

    Default

    Quote Originally Posted by sethy
    However, if the LA is used in your area- you are toast. I had JTG on everything but the LA when I had my lasershield, veil, and m40, but the LA cut right through it all like it was nothing.
    My area doesn't use LA guns, mainly Kustom brands. I bought the M20 but the vendor (Blinder USA) said they are actually M25 heads. I'm wondering if the newer heads would work better?

  10. #10
    Good Citizen
    Join Date
    Dec 2005
    Location
    Central Florida
    Posts
    168

    Default

    I think JTG is something like maximum range testing as done with radar detectors, only in reverse. It CAN be useful, but is not definitive. The best test of a detector, jammer or anything else is to test it as it will actually be used in the real world. Most cops that I encounter using radar, and the occasional lidar gun, are shooting at medium to medium-short distances. Just as most deer taken by center-fire rifle hunters are not taken at 300 yards, but probably at more like 50 - 200 yards, most experienced cops do not try to take long shots with their weapons of choice, at least not in the eastern USA.
    If a jammer will JTG from, say, 1000 Yards in a test, it may be REASONABLE to assume that it will do so from 250 yards, but the test does not actually prove that it will. It could be that at 250 yards the lidar will "burn through" before the jammer has time to react. The only way to know for sure is to test at 250 yards. Testing at long, medium and close range is the best way to determine that a jammer will have your ass covered. These are just my thoughts, worth what you paid for them . I don't yet have a jammer as I have encountered very few lidars and am waiting and hoping for one that approximates my V1 in reliability. BTW, the V1 generally alerts when the car ahead is lasered, and if I'm driving "point", or alone, I'm very careful about scanning visually for likely traps.

 

 

Similar Threads

  1. Laser Ally Hype
    By PapaSmurf805 in forum Laser Interceptor
    Replies: 9
    Last Post: 11-13-2011, 03:54 PM
  2. Replies: 13
    Last Post: 11-08-2010, 02:34 PM
  3. SC-55 not living up to the hype
    By Offshore in forum Escort
    Replies: 66
    Last Post: 05-10-2010, 08:57 PM
  4. Is the 3.813 hype true?
    By Cips in forum Valentine One
    Replies: 30
    Last Post: 11-20-2009, 07:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •