Results 1 to 8 of 8
  1. #1
    Newcomer
    Join Date
    Dec 2007
    Location
    Tennessee
    Posts
    31

    Default New V1 and suggestions for HD FLHTCU

    I just purchased a new V1 for use in my car and motorcycle. I have an '03 HD Ultra which is equipped with a Garmin Quest gps and XM Roady. I am interested in suggestions on mounting locations and protection from rain and the elements while in use. I have replaced my stock mirrors with the batwind fairing mounts, so I am thinking that use of the mirror mounting holes may be a good option. Lately my favorite riding spots, the Dragon, has been infested with THP since the summer and county mounties during the week. Although I normally do not speed like the crouch rocket guys, I do a fair job on the curves with the Ultra and don't want to be surprised around the next curve.
    Jerry

  2. #2
    Cheetah Rep
    Join Date
    Feb 2005
    Location
    Phoenix, Arizona
    Posts
    2,567

    Default

    i used a handlebar mount found here:
    http://www.radarbusters.com/radar-de...mmount16mm.cfm

    and the clear protective cover here:
    http://www.radarbusters.com/radar-de...ectorcover.cfm

    this setup works great.
    i also painted the cover except for the front and back for a more concealed look.
    here's some pics:






    The display seems to wash out a lot though. that is one thing i liked about he X50 blue was that it didn't washout nearly as bad.

    either way i use a Cheetah Vizalert anyway (of course )
    http://www.cheetahusa.com/scshop/Sec80.htm

  3. #3
    Advanced Member
    Join Date
    Mar 2005
    Location
    Police State of Ontario
    Posts
    1,967

    Default

    I've never seen an RD on a Harley ... I guess you'll test the vibration issue for us

  4. #4
    Newcomer
    Join Date
    Dec 2007
    Location
    Tennessee
    Posts
    31

    Default

    I guess I will. So far my Garmin Quest and Roady2 XM receiver has seen about 30K on the Harley without any vibration issues. I once had a older Garmin V-5 that would not lock on a sat because of the vibration, but I think that was an isolated thing with that unit.

    RacerX, the transculent cover you show on your bike, is it durable and waterproof? I was curious if moisture builds up in it if it is too sealed?

    Jerry

  5. #5
    Speed Demon
    Join Date
    Dec 2007
    Posts
    569

    Default

    My VFR800 doesn't likely vibrate like a Harley. I've mounted my GPS on a RAM mount, which soaks up vibrations by itself. The GPS has almost 20k miles on it. My V995 is mounted inside the windscreen for the past 10k miles with no issues.

  6. #6
    Advanced Member
    Join Date
    Mar 2005
    Location
    Police State of Ontario
    Posts
    1,967

    Default

    Quote Originally Posted by zr1
    My VFR800 doesn't likely vibrate like a Harley. I've mounted my GPS on a RAM mount, which soaks up vibrations by itself. The GPS has almost 20k miles on it. My V995 is mounted inside the windscreen for the past 10k miles with no issues.
    Now there's the understatement for the week.

    Which unit and what mount?

  7. #7
    Speed Demon
    Join Date
    Dec 2007
    Posts
    569

    Default

    LOL!

    The GPS is a Garmin Quest. People seem to like the rubber ball mounts to soak up some vibrations. The mount pieces are:
    * connects to two bolts at front of tank
    * extension piece
    * Another ball for the top of the extension
    * Garmin cradle
    * electric cables for Garmin

  8. #8
    Cheetah Rep
    Join Date
    Feb 2005
    Location
    Phoenix, Arizona
    Posts
    2,567

    Default

    Quote Originally Posted by tnharley
    RacerX, the transculent cover you show on your bike, is it durable and waterproof? I was curious if moisture builds up in it if it is too sealed?

    Jerry
    it's very durable. it has handled any speed or road condition thrown at it. i don't make a habit of riding in the rain, but i have been caught once or twice and it stayed 100% dry inside. there is a hole on the bottom corner for the cord and that's it.
    i've never seen a moisture issue or build up. i keep it garaged.

    the top snaps on to the bottom half. the bottom piece Velcros to the mount, then there is a velcro piece for the bottom of the detector, then you can put a piece of velcro on top of the detector, just in case the top cover came loose.
    for the longest time when i had the X50, i never used the velcro on top of the detector and at highway speeds and above it never budged.

 

 

Similar Threads

  1. Any Suggestions?
    By Splater in forum Radar Detectors - General
    Replies: 2
    Last Post: 06-29-2010, 06:22 AM
  2. New guy looking for suggestions
    By schadenfreude in forum Introduce Yourself
    Replies: 63
    Last Post: 07-05-2009, 02:27 AM
  3. Suggestions?
    By no1crs in forum Valentine One
    Replies: 10
    Last Post: 08-31-2007, 04:40 PM
  4. XTR 690 and Pro 78 suggestions
    By Flashed32 in forum Whistler
    Replies: 11
    Last Post: 07-07-2007, 07:58 AM
  5. Suggestions?
    By hpot in forum Whistler
    Replies: 4
    Last Post: 05-21-2006, 01:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •