Page 1 of 36 12311 ... LastLast
Results 1 to 10 of 353
  1. #1
    Cheetah Rep
    Join Date
    Feb 2005
    Location
    Phoenix, Arizona
    Posts
    2,567

    Default LI Problem: DEAD heads but control box says all okay!

    I took video of this for everyone to see, and i'll work on that next.


    Anyway, here's the problem. This person was doing some testing for an upcoming review, when he started getting the port warning the other day.

    First, the LI control box requires 2 heads minimum plugged into it.
    If you only plug 1 head into port 1, you get the port 2 connection warning.
    Same if you plug 1 head into port 2, you get the warning for port 1.

    This is fine, it's supposed to let you know if something is wrong, but:

    The warning said "port 1 connection bad" or something to that effect.

    I shot the front end and it didn't jam and gave no alerts.
    I checked the heads with the IR cam and they weren't firing at all.

    The "explanation" so far has been possible bad crimps, and some people have said that the problem goes away upon re-plugging in the heads.
    Well I unplugged them both, and swapped ports (1 in 2, 2 in 1).

    I then turned it back and and it gave the usual "Welcome" tone, and a few seconds later, it gave the usual "Parking aid deactivated".

    I thought "great", that was easy.....

    went to the front of the car and NOTHING. BOTH HEADS WERE DEAD!
    Put the gun up to it, looked through the IR cam, and NOTHING.

    turned it off, then back on, same friendly startup which is "supposed" :roll: to indicate all is well, walked around quickly, got NO parking beep alerts from either head, it sounded the "Parking aid deactivated", shot it and NOTHING. tried a different gun and NOTHING.

    Switched them back, got that same port 1 warning, tried them and nothing still.

    Disconnected port 1, got the same warning, BUT, one head started working!

    turned it off, put the "good one" into port 1, got the port 2 error ( normal with one head), and checked, and sure enough that head still worked.

    Tried the other head and it is dead.

    So one bad head caused both heads not to work, even though it gave the "welcome" at startup which is supposed to indicate everything is fine and working properly!



    Of course this leaves the question of are more people having dead heads and not even knowing about it, and worse yet, getting the "normal" startup, yet have NO PROTECTION WHATSOEVER?


    This has gone beyond the "few people" with a crimp problem.

    Obviously there is a major flaw on this first batch, now the questions is, what is going to be done about it.

    Performance isn't the issue, the fact it may not even work IS.


    :?

  2. #2
    Old Timer
    Join Date
    Nov 2006
    Location
    Cleveland/Shaker Heights, Ohio, USA
    Posts
    7,732

    Default

    Thanks for the heads-up, bruddah.

    This was what I feared, too, so upon my "reconnect/swap cure" the other afternoon, I also cheched both reception and output (sadly, I do bot have a way to confirm true jamming - ie. no LIDAR gun).

    It seems, knock-on-wood, that I'm OK, for now, with my LIs.

    Note, however, that even the current version of the LPP has this issue - if one of the two heads plugged into it is bad, the other, the good, will effectively "hide" the fact that there is a faulty unit connected to it.

    It'll self-check as-if both heads are fine.

    I unfortunately did not think, at the time of my LPP trouble (it was one of the not-as-well-crimped, first/second-batch UK-manugactured heads), to confirm either reception nor output.

  3. #3
    Good Citizen
    Join Date
    Jun 2007
    Posts
    90

    Default

    After you call and it got dark out I took my camera out and tried to see the diode going off during the parking mode.. My camera showed nothing, but when I placed various remote controls in front of the camera I get a blueish light..

    But my parking sensor works fine, it beeps as I move my had close and closer. So I assume everything is working alright and maybe my camera cant pick up the 904nm light vs an 800-850 for a remote control, and this might also be why I cant find a single remote to set off my LI.


    If anyone has a remote that sets off the LI please let me know, I have tried everything from the cable box remote to my XM radio remote. All of them set off the V1 but not the LI.

  4. #4
    Yoda of Radar
    Join Date
    Mar 2005
    Location
    Rottweiler Land
    Posts
    10,420

    Default

    I feel sick......

  5. #5
    Speed Demon
    Join Date
    Oct 2007
    Location
    NYC
    Posts
    583

    Default

    Quote Originally Posted by andrewaz
    If anyone has a remote that sets off the LI please let me know, I have tried everything from the cable box remote to my XM radio remote. All of them set off the V1 but not the LI.
    I can set my LI off using my Palm Treo 700p by "beaming" a contact.

  6. #6
    Cheetah Rep
    Join Date
    Feb 2005
    Location
    Phoenix, Arizona
    Posts
    2,567

    Default

    You're telling me.
    I didn't want to add other jammers to the bike, but i don't trust my LI anymore.

    Especially since my passive countermeasures haven't been done yet, i could be a sitting duck.
    at this rate, mine should be failing any day now.

    anyway, here's the video.
    nothing fancy, just the raw footage with a few title clips.

    17.8 MB
    LI head problem video

  7. #7
    Yoda of Radar
    Join Date
    Mar 2005
    Location
    Rottweiler Land
    Posts
    10,420

    Default

    I know someone who won't be getting Xmas card from Elvis and Ivan this year.....

  8. #8
    Speed Demon
    Join Date
    Oct 2007
    Location
    NYC
    Posts
    583

    Default

    Quote Originally Posted by RacerX
    You're telling me.
    I didn't want to add other jammers to the bike, but i don't trust my LI anymore.

    Especially since my passive countermeasures haven't been done yet, i could be a sitting duck.
    at this rate, mine should be failing any day now.

    anyway, here's the video.
    nothing fancy, just the raw footage with a few title clips.

    17.8 MB
    LI head problem video
    Wow. Thanks for the eye-opening, informative video. I've been running one head only while I'm waiting for a new second.

    Once I get my second head, I'm going to have to check that they actually work every time I go out! That's messed up.

  9. #9
    Speed Demon
    Join Date
    Oct 2007
    Location
    NYC
    Posts
    583

    Default

    Quote Originally Posted by davekr
    I know someone who won't be getting Xmas card from Elvis and Ivan this year.....
    I took a certain known risk of realiability when I got the LI for it's supposed amazing performance (also the head dimensions fit well in my grill). Now I hope customer service/product developement rises to the occasion and earns our trust back.

    Hopefully, the problem with unrealiable start-up "welcome" system check is an issue easily remedied by a software update that will be released soon to the public. When was the release date again? :roll:

    I'm starting to eye the 9500ci. I would accept less performance for durability. What's the point it at any time your sensor may be unknowingly dead? Then again, what's Escort's track record?

    My wife always tells me this is a shady hobby, but I'm committed.

  10. #10
    Old Timer
    Join Date
    Nov 2006
    Location
    Cleveland/Shaker Heights, Ohio, USA
    Posts
    7,732

    Default

    ^ Heck, bro, all hobbies are shady. That's why they're hobbies!

    Back on-track....

    Escort's jammers haven't been exactly trouble-free, either. The early ZR3s suffered, also, from weatherproofing problems at its exposed heads.

    Even the later models seem to have an appx. 3-4 year "life span" before at least some part of it becomes problematic (mine, for example, was actually a control-box issue).

    ---

    andrewaz -

    I know, for certain, that the IR-LED based "Laser Tester" that was sold in Roy's old shop here DOES elicit the "Unknown Gun" response from the LI.

    Also, I know that the LPP's parking-beam will elicit the same response from the LI.

    Maybe either of these two will help?

 

 

Similar Threads

  1. 9500ci Speaker / Volume Control Problem
    By beeslappa in forum Escort
    Replies: 5
    Last Post: 11-30-2010, 04:44 PM
  2. Will a 4 head control box work if I only use 2 of the heads?
    By AFineRide in forum Blinder Laser Jammers
    Replies: 2
    Last Post: 03-02-2010, 07:28 PM
  3. LI Problem: Head dead but control box says okay: FIXED YET?
    By Suf Daddy in forum Laser Interceptor
    Replies: 24
    Last Post: 04-04-2008, 08:06 PM
  4. V1 problem, she's dead. V# 3.861
    By RadioZero in forum Valentine One
    Replies: 4
    Last Post: 12-05-2007, 04:17 PM
  5. Heads Up Display (HUD) on Grand Prix - Problem For V1?
    By Paul79UF in forum Valentine One
    Replies: 6
    Last Post: 02-12-2006, 08:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •