Results 1 to 8 of 8
  1. #1

    Default 9500i not loud enough on motorcycle

    Just got a new 9500 and hooked the external speaker to my StarCom1 Digital Com System. Everything works fine , but the RD is not near loud enough to hear above the wind noise, even when vol on wide open.

    Any clues what to do???

  2. #2
    Good Citizen
    Join Date
    Mar 2007
    Location
    Tomball
    Posts
    178

    Default

    its probably the detector more than anything....
    i use my valentine 1, w/ an autocom intercom system...
    the valentine one "remote audio" adapter allows the
    audio to be boosted enough that even when i wear
    earplugs i can hear the detector...in fact w/ the
    remote audio adapter i & ear plugs i dont typically
    run the volume more than 50%



    you could try boosting the audio <from the detector into
    the intercom>...that would confirm the problem is w/ the
    detectors audio output level.

    http://www.boostaroo.com/store_detail.php4?id=14


  3. #3
    Advanced Member
    Join Date
    Mar 2005
    Location
    Police State of Ontario
    Posts
    1,967

    Default

    I'm getting old I guess but I'm worried about my hearing after long rides.

    I've gone Viz alert and no sound at all just ear plugs

  4. #4

    Default

    I think I may have the wrong cable. I used a 3.5 to 3.5 stereo cable when I shoulda used a mono cable. Got one ordered.

    In the mean time I bought a visial alert and kinda like it. The wifey and I use a intercom and I don't think I want the RD kicking in while we're talking.

  5. #5
    Newcomer
    Join Date
    Jun 2008
    Location
    Texas
    Posts
    50

    Default radar screamer

    You should try the Radar screamer. I use it on my CBR600rr, which has aftermarket exhaust, and I can always hear the signals loud and clear. It also has a volume/mute switch that is easy to install and inconspicuous. I use it with an rx65 and it works great. The only thing I don't like about it is the the voice alerts do not come through it, just the beep signals.

  6. #6
    Power User
    Join Date
    Jan 2008
    Location
    St. Petersburg, Fl
    Posts
    3,305

    Default

    In the meantime you can use a standard walkman or ipod speaker in your helmet. you will only get sound in one speaker since its mono, but I mounted both speakers behind my earpads in my helmet and plug directly into external speaker jack on rd. Gives plenty of volume until you get your external power speaker setup completed.

  7. #7
    Yoda of Radar
    Join Date
    Nov 2005
    Location
    NY
    Posts
    11,015

    Default

    Quote Originally Posted by Freebird View Post
    In the meantime you can use a standard walkman or ipod speaker in your helmet. you will only get sound in one speaker since its mono, but I mounted both speakers behind my earpads in my helmet and plug directly into external speaker jack on rd. Gives plenty of volume until you get your external power speaker setup completed.

    RS also sells a mono-to-'stereo' output on this, though its not true stereo... its just a couple bucks.

  8. #8
    Banned
    Join Date
    Jun 2007
    Posts
    9,496

    Default

    Quote Originally Posted by Dagwood View Post
    I think I may have the wrong cable. I used a 3.5 to 3.5 stereo cable when I shoulda used a mono cable. Got one ordered.
    X2, definitely need a mono, or your only getting 1/2 power I believe.

 

 

Similar Threads

  1. I just got an RX 65 but its not that loud
    By vandaleigh in forum Beltronics
    Replies: 14
    Last Post: 10-31-2006, 06:02 PM
  2. HELP!!!! AC LOUD Sound
    By venexoz in forum Car Talk
    Replies: 10
    Last Post: 09-15-2006, 09:15 AM
  3. Is the V1 Loud enough?
    By TexasRed in forum Valentine One
    Replies: 26
    Last Post: 03-04-2006, 03:06 PM
  4. how loud is the V1
    By Dilip in forum Valentine One
    Replies: 7
    Last Post: 12-06-2005, 10:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •