...showing up on our RD's as a ZR3 when linked??? I have seen several posts by current ZR4 owners saying this is occuring, and just want to make sure I'm not gonna get screwed. Thanks guys!
Victor
...showing up on our RD's as a ZR3 when linked??? I have seen several posts by current ZR4 owners saying this is occuring, and just want to make sure I'm not gonna get screwed. Thanks guys!
Victor
I'm sure it has to do with the fact that all of our RDs were programmed and manufactured before the ZR4 was available.
Pretty sure it works as described when we hooked the escort zr3 up to the BEL STi the BEL said it was the Laser pro 904...not the 905
Yeah it seems it just identifies itself as "the jammer" and the detector is programmed to make the displays.
Yea, as long as the jammer it's self is controlled by seperate control module and not the detector it's self so the pulses are correct, all should be good.
The detector merely gets a signal that says "jammer is present" or "jammer is jamming". The detector itself "assumes" that it's the model of jammer that was made when the RD was made, so an X50 will say "ZR3" because it's hard coded in the X50's firmware. But the ZR4 will still be a ZR4, even if it's plugged into a RD that says it's a ZR3.
If I'm passing you on the right, YOU are in the wrong lane!
If speed kills, how come I'm still alive?
Active Countermeasures: V1 3.858, Escort Redline, Beltronics STi-R+, LI Dual 7.1x CPU/8.7 Heads (front)
Other/Backup Countermeasures: V1 3.813 (loaned to friend), Beltronics Pro RX65 M4 6.3
Vehicle: 2002 Audi A4 1.8T Quattro
LEO Toys: Kustom Pro Laser II & III
Encounters/Saves August 2011: Radar 3/1, Laser 0/0
That clears up alot...just wanted to be sure! Thanks!Originally Posted by kpatz
Bookmarks