Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Experienced
    Join Date
    Aug 2008
    Location
    Jersey
    Posts
    313

    Default 9500ci shifter vs LTI Marksman/Ultralyte

    What is the effectiveness? GOL shows poor results, but on the Chevy, it showed better results, even without the Veil. I have a dark blue sports car with no shiney grill. How effective do you think the ZR4 shifters that come with the 9500ci will be? How much reaction time do you think I will be given for the Marksman or Ultralyte?

  2. #2

    Default Re: 9500ci shifter vs LTI Marksman/Ultralyte

    For a dark colored sports car with no shiny grille, the ZR4 should be rather effective against the Ultralyte.

  3. #3
    Experienced
    Join Date
    Oct 2008
    Location
    Oregon
    Posts
    320

    Default Re: 9500ci shifter vs LTI Marksman/Ultralyte

    Quote Originally Posted by Xen0n flash View Post
    What is the effectiveness? GOL shows poor results, but on the Chevy, it showed better results, even without the Veil. I have a dark blue sports car with no shiney grill. How effective do you think the ZR4 shifters that come with the 9500ci will be? How much reaction time do you think I will be given for the Marksman or Ultralyte?

    I can only comment on my setup, and what I have tested them with. I have ZR4's mounted in the enthusiast setup (rear head up front) on my White 95 Jeep Grand Cherokee, along with a bra and veil, and I was JTG against a PLII. I think that the ZR4 with a little help from Veil become very good jammers.

    See this thread: http://www.radardetector.net/forums/...-djrams80.html
    Last edited by The Breeze; 02-17-2009 at 11:49 PM.

  4. #4

    Default Re: 9500ci shifter vs LTI Marksman/Ultralyte

    Another trick which I did to improve my ZR4's performance was to spray paint everything which is located behind my car's grille flat black.

  5. #5
    Yoda of Radar
    Join Date
    Oct 2007
    Location
    Los Angeles Area
    Posts
    13,879

    Default Re: 9500ci shifter vs LTI Marksman/Ultralyte

    I don't think it's as easy as dark car, no shiny grille. I have a dark car, with no shiny grille and it's a mutha to protect. I think people try to just look at cars as judge how easy it might be to protect, but it's not always that simple. I can go out shooting cars with a laser gun and cars that I think should be difficult to tag give instant readings and vice versa. I tend to think the flatness of the front face of the car is never mentioned, but is just as large a factor as those always mentioned.

  6. #6

    Default Re: 9500ci shifter vs LTI Marksman/Ultralyte

    Not all red paints are the same. The color red is closest to near IR compared to any other color whereas dark blue is furthest away from from near IR. Its hard to find IR camera film these days, but it is possible that your red car photographed with IR film would be glowing.

  7. #7
    Experienced
    Join Date
    Aug 2008
    Location
    Jersey
    Posts
    313

    Default Re: 9500ci shifter vs LTI Marksman/Ultralyte

    Looks like MEM and rams have a difference in opinion. The reason I ask is because I have a shot at getting the 9500ci $900 on Ebay.

  8. #8
    Speed Demon
    Join Date
    Jul 2008
    Posts
    514

    Default Re: 9500ci shifter vs LTI Marksman/Ultralyte

    With some assistance, the ZR3s and ZR4s will JTG the Ultralyte and Marksman (i.e., veil, plate covers, etc.)

  9. #9
    Experienced
    Join Date
    Aug 2008
    Location
    Jersey
    Posts
    313

    Default Re: 9500ci shifter vs LTI Marksman/Ultralyte

    Well even a 5 second Window to slow down would do. I don't want to do JTG the whole way (and I doubt I could do that with the ZR4 anyway). I heard Veil makes your headlights look ugly and reduces output, though I haven't really seen them...

  10. #10
    Yoda of Radar
    Join Date
    Oct 2007
    Location
    Los Angeles Area
    Posts
    13,879

    Default Re: 9500ci shifter vs LTI Marksman/Ultralyte

    Quote Originally Posted by Xen0n flash View Post
    Well even a 5 second Window to slow down would do. I don't want to do JTG the whole way (and I doubt I could do that with the ZR4 anyway). I heard Veil makes your headlights look ugly and reduces output, though I haven't really seen them...
    I originally applied Veil myself and wasn't happy with how it looked. I have zero artistic ability and that was surely part of the problem. Lots of other people around here have gotten better looking results.

    http://www.radardetector.net/forums/...veil-pics.html

    Anyhow, since my car had to go to the body shop anyways, I had my Veil professionally applied by a paint shop and I think it looks fantastic. I do not notice any less light output whatsoever.

    http://www.radardetector.net/forums/...ally-done.html

 

 

Similar Threads

  1. 9500ci without laser shifter?
    By mwdf in forum Escort
    Replies: 5
    Last Post: 09-28-2010, 10:00 PM
  2. 9500ci shifter Q
    By focalcivic in forum Escort
    Replies: 2
    Last Post: 08-30-2008, 03:02 PM
  3. lti error codes........lti marksman and ultralyte..
    By laserblaster in forum Laser Jammers - General
    Replies: 5
    Last Post: 05-08-2006, 09:33 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •