Page 1 of 4 123 ... LastLast
Results 1 to 10 of 38
  1. #1
    Radar Fanatic
    Join Date
    Jul 2008
    Location
    Nashville, TN
    Posts
    2,306

    Default Will a ZR3 cut it?

    I'm seriously considering a jammer this summer after a laser ticket in Metro last Thanksgiving. I would like the M25 but I could get the ZR3 on amazon for $219. I would like to think my car has a low LIDAR profile. No chrome in the grill, small car, and it is black. What do you all think? Would a little VEIL make it work or should I stick with the Blinder? I'm 5-10 over driver generally with a few locations I got 5 over and some I go 10-15 over. As far as I know my main threat will be the rare Ultralyte threat in Brentwood,TN and the PL3 by Metro Nashville. I don't know for sure if there is any Stalker LIDAR but I don't think so.

    The Altima is my in-town, to school and back car. I don't travel long distances where my threats may change from city to city. Any suggestions on placement. The grill looks jammer "friendly" for mounting at first glance.

  2. #2
    Yoda of Radar
    Join Date
    Oct 2007
    Location
    Los Angeles Area
    Posts
    13,879

    Default Re: Will a ZR3 cut it?

    It's my opinion that with Veil, the ZR3s will work very well on that car. They will not detect Laser Atlanta stealth mode, but nobody uses that anyways. The only gun you could have serious problems with might be the Stalker.

  3. #3
    Speedtrap Crasher
    Join Date
    Aug 2006
    Location
    Houston, TX
    Posts
    6,732

    Default Re: Will a ZR3 cut it?

    Agreed^ Even with the Stalker you will get two or three seconds of good warning before Punch Thru.

    However, next shoot I'm going to test a "close proximity" ambush style test and see what happens when you get shot under 500 ft with the Stalker.
    Project "BONES" Speed Lab:
    Valentine One, Blinder M47 "All Front Configuration"
    Pro97 Police Scanner
    1 Saves / 3 Strikes as of 8/22/2009
    Estimated saves in U.S. Dollars: $200

  4. #4
    Radar Fanatic
    Join Date
    Jul 2008
    Location
    Nashville, TN
    Posts
    2,306

    Default Re: Will a ZR3 cut it?

    Can I link it up to my 9500ix? How does that work?

    If I'm going up against Pro Laser 3 and Ultralyte do I even need veil? I can do VEIL but I don't want to look like a ricer in a 14 year old car with darkened lights.
    Last edited by stlcardsfan; 03-11-2009 at 09:00 PM.

  5. #5
    Advanced Member
    Join Date
    Feb 2005
    Location
    Southern MA
    Posts
    10,127

    Default Re: Will a ZR3 cut it?

    Quote Originally Posted by erickonphoenix View Post
    Agreed^ Even with the Stalker you will get two or three seconds of good warning before Punch Thru.

    However, next shoot I'm going to test a "close proximity" ambush style test and see what happens when you get shot under 500 ft with the Stalker.
    And limit how far you guys sit off the road... In NY, NJ, MA, and OH the laser traps I have seen the cops are barely off the road maybe 15feet tops off the first lane


    Clay I think a Zr3 would be a perfect on your Altima. Mount all heads up front and VEIL your lights and your good.

    Yes the Escort jammers suck against the Stalker LZ1 but VEIL absolutely owns the LZ1. Zr3 all heads up front and VEIL lights you will JTG a Stalker LZ1

    Spoiler: show

    Radar Detectors-V1 & BEL v995
    Laser Jammer-Laser Interceptor Quad
    GPS Camera Locator-Cheetah C100
    GPS Nav-Garmin nuvi w/Trapster
    CB Radio-Galaxy DX-949 w/Wilson 500
    Scanner-RS Pro-96

  6. #6
    Power User
    Join Date
    Nov 2007
    Location
    Htown
    Posts
    3,253

    Default Re: Will a ZR3 cut it?

    to the OP consider yourself lucky, no Stalker in TN, just PL3 (according to the list of lidars)...
    BTW now that CVR mentioned it, I've tested the LZ1 against Blinder and ZR3 and for some reason the LZ1 would eat any of them alive without veil...

  7. #7
    Yoda of Radar
    Join Date
    Oct 2007
    Location
    Los Angeles Area
    Posts
    13,879

    Default Re: Will a ZR3 cut it?

    Quote Originally Posted by Clay_in_Nashville View Post
    Can I link it up to my 9500ix? How does that work?
    Yes, they link. I'm not sure how, because I've never done it, but I know it works.

    Quote Originally Posted by Clay_in_Nashville View Post
    If I'm going up against Pro Laser 3 and Ultralyte do I even need veil? I can do VEIL but I don't want to look like a ricer in a 14 year old car with darkened lights.
    Most definitely. The Ultralyte ate my ZR3s and ZR4s alive without Veil.

    Quote Originally Posted by speed-dreams View Post
    to the OP consider yourself lucky, no Stalker in TN, just PL3 (according to the list of lidars)...
    That's good news.

  8. #8
    Radar Fanatic
    Join Date
    Jul 2008
    Location
    Nashville, TN
    Posts
    2,306

    Default Re: Will a ZR3 cut it?

    Couple more questions since I know little about jammers....

    What is the point in linking the ix to the ZR3?

    How do I test it to make sure it works?

    Where would you all recommend mounting?

    For me laser encounters (or any speed measurement) is rare just because of the side of town I live on (more residential, 1 school, no businesses) but with jammers being illegal here I have to ask has anyone been stopped on rd.net for jamming laser whether or not they used the kill switch.

    I'm done for now. Thanks!

  9. #9
    Speedtrap Crasher
    Join Date
    Aug 2006
    Location
    Houston, TX
    Posts
    6,732

    Default Re: Will a ZR3 cut it?

    Quote Originally Posted by Clay_in_Nashville View Post
    Couple more questions since I know little about jammers....

    What is the point in linking the ix to the ZR3?

    How do I test it to make sure it works?

    Where would you all recommend mounting?

    For me laser encounters (or any speed measurement) is rare just because of the side of town I live on (more residential, 1 school, no businesses) but with jammers being illegal here I have to ask has anyone been stopped on rd.net for jamming laser whether or not they used the kill switch.

    I'm done for now. Thanks!
    Always JTK (Jam Then Kill) it's not always necessary but it's good practice. As for your linking question. Linking keeps all your alerts in one spot so you only have to look one place to figure out what's on.
    Project "BONES" Speed Lab:
    Valentine One, Blinder M47 "All Front Configuration"
    Pro97 Police Scanner
    1 Saves / 3 Strikes as of 8/22/2009
    Estimated saves in U.S. Dollars: $200

  10. #10
    Advanced Member
    Join Date
    Feb 2005
    Location
    Southern MA
    Posts
    10,127

    Default Re: Will a ZR3 cut it?

    Quote Originally Posted by Clay_in_Nashville View Post
    Couple more questions since I know little about jammers....

    What is the point in linking the ix to the ZR3?
    So the alerts will just come throug the ix. Really it will just be a cleaner install
    How do I test it to make sure it works?
    During start up of the detector it should recognize that there is a jammer there. Back in 07 GOL event we tested the BEL STi to be the alert unit for the escort zr3 we were testing. While the BEL STi said it was an LaserPro 904 it still worked just like the zr3. There is no difference in the jamming performance just the alerts are coming through the detector.
    Where would you all recommend mounting?

    For me laser encounters (or any speed measurement) is rare just because of the side of town I live on (more residential, 1 school, no businesses) but with jammers being illegal here I have to ask has anyone been stopped on rd.net for jamming laser whether or not they used the kill switch.

    I'm done for now. Thanks!
    Use VEIL along with the Escort ZR3 3 heads upfront and you have a JTG vehicle


    Spoiler: show

    Radar Detectors-V1 & BEL v995
    Laser Jammer-Laser Interceptor Quad
    GPS Camera Locator-Cheetah C100
    GPS Nav-Garmin nuvi w/Trapster
    CB Radio-Galaxy DX-949 w/Wilson 500
    Scanner-RS Pro-96

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •