![]()
As most of you know i'm switching out my RX75 Pro Plus system with the ZR3's for a V1 and either LI or Blinder combo.I'm thinking that LI will be my only option if i go the no Veil option.
![]()
As most of you know i'm switching out my RX75 Pro Plus system with the ZR3's for a V1 and either LI or Blinder combo.I'm thinking that LI will be my only option if i go the no Veil option.
Yes.(Although head placement on the rear looks tough)
yes
Hey Rob you've been giving me advice since post #1.Where would you place the LI heads?
Alright.I'm sure he'll be checking in here sometime soon..
Should be no trouble for the LI to give you JTG/JFG performance on that car, unless of course you show up for one of the Atlanta area testing session, then we can guarantee a 1000' PT.![]()
Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
9500ci (On Vette)
LI Quad (On Ice Cream Truck)
LI Dual (On SRX, 7.06 CPU)
ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)
2008 Corvette Z-51 Coupe
Escort 9500 ix (Cadillac SRX)
Checking in.....Here are my recommended install locations. Either #1, vertically in the grill with the Sensor bubbles up or, #2, horizontally under the bumper with the Sensor bubbles outwards towards the headlights.
As to the rear, you can use the rear Slim Sensor mounting brackets to facilitate an install much like on my car to get the Sensors closer to the Achilles heal of the rear of most vehicles with large taillights #1 directly under the taillights, or, #2, on the top of the bumper both with the Sensor bubbles inwards or, finally, #3, the traditional location above the LP which is the least effective, Sensor bubbles outwards.
BTW, Black is a GREAT color for LCM!
Cliff - LI-USA/LI-UK
Last edited by Laser-InterceptorUSA; 04-18-2009 at 09:03 PM.
That is my exact Milan to the T,except my windows are tinted and i have chrome exhaust tips.
You can but testing would reassure you will JTG... If you don't test your setup, there are no guarantees.
Bookmarks