
Originally Posted by
Clay_in_Nashville

Originally Posted by
Freebird

Originally Posted by
mikeslc

Originally Posted by
Clay_in_Nashville
I know what you mean. I run my 9500ix with my V1 just for spec. Otherwise I wouldn't risk it.
Do you notice any interference running both together? I wonder if there will be any interference issues if I get a V1 and run it along side my Pro 78se? I should ask Freebird, since he has both.
Interferance is easy to spot. One will be silent on an alert until almost 200 feet from the leo and when it alerts it will be like instant on. I have runs alot of units and had no interferance issues, but running a Whistler in my and DJ's test the Whistler interfered with the CI to a point on 35.5 the CI was silent until almost 100 feet from the radar gun. I would try them together and see what you observe. Its easy to spot interferance IMO.
Well, in that case, I've noticed no interference between the 9500ix and the V1. In fact, my results running the two together are pretty characteristic of what you might expect.
I run them as far apart as I comfortably can.
no 2 radar detectors even same model and brand will emit the same emissions. If they are going to interfere, one will be emitting ka 34.7, 33.8 or 35.5. Not on the exact freq, but if it is leaking the other detector will pick it up, filter it and ignore other alerts close to that frequency. There is no way to tell if one will interfere with the other without testing them for some time together, to determine if one shows a signifigant loss in performance IMO.
Bookmarks