PDA

View Full Version : Laser sensor inside headlight ?



shiggsy
01-03-2007, 05:36 AM
Hi,
just bought an LPP for my bike (ZX12). Don't know wether this is stupid or not but I was wondering if locating the sensor inside the headlight was a good or bad idea. Would the sensor still be effective, would the lens be a problem or would it get to hot in there for the sensor.

Thanks

TSi+WRX
01-03-2007, 07:58 AM
Hi,
just bought an LPP for my bike (ZX12). Don't know wether this is stupid or not but I was wondering if locating the sensor inside the headlight was a good or bad idea. Would the sensor still be effective, would the lens be a problem or would it get to hot in there for the sensor.

Thanks

^ Hi there!

From what little research I've done on these Forums, the "inside another lens" housing is typically not advised, as it is speculated that the additional lens would work to disrupt the outgoing signal.

Exactly how big of a concern this is, in so far as I know, is an unknown, as no one has truly tested this on a quantitative basis.

RacerX
01-03-2007, 01:47 PM
my concern would be the heat build up, especially since most bikes are designed to always have the headlight on.

as for performance, it has yet to be tested if having a jammer behind the clear headlight glass would cause any issues.

until it's been tested thoroughly i'd advise against it, since you don't want to wait until you get shot to see if it will work, and how well it will holdup.

plus. i don't know if the light from the headlight would flood out the light from the jammer, so that the laser gun doesn't see the jamming pulse.

shiggsy
01-05-2007, 04:38 AM
Thanks for replies.
Ok with the headlight options out, I have a few questions.

1) How back into the bike can the sensor be located. Does it have to be right at the front ? At the moment the most stealthy position for me is to have the sensor below the headlight a couple of inches but recessed back about 14 inches.

From the picture here it will be between the gold forks but further back.
http://www.zx-12r.org/PhotoPost/data//500/medium/IMG0007.JPG



2) Does the sensor have to be mounted horizontally or can it be mounted vertically.

Thanks

spankyaf
01-05-2007, 08:15 AM
The problem with recessed back is that it may not pick up laser shots from overpass laser and other off axis shooting positions.

Yes the sensor has to be horizonatlly mounted with attention payed to keeping it level.

The Laser Park Pro has a head the size of a match box so hopefully you can find a stealthy location. I agree the mounting options on most bikes are limited.

shiggsy
01-05-2007, 11:40 AM
Ok, i decided against that position as well. Coverage wise I think it would have been ok, detection angles typically seem to be fairly narrow, not sure about overpasses but that's not much of a problem on bike. The real problem was mounting it. Mounting on the front mudguard means it will be moving constantly with the suspension so probably not ideal, especially under braking, it risks bashing the sensor into the upper part of the bike as the forks compress. Likewise bashing it into the mudguard means can't mount it on the upper part. That left the radiator guard which sits flush against the rad. The bracket would attach securely to that and bent to keep the sensor away from it, but it does blocks a fair portion of the radiator, even though the bracket is fairly perforated. Cutting away the insde of the bracket could solve that though I guess. As long as having the sensor 14 inches behind the headlight wasn't a problem that would be probably be ok.


The most effective and obvious place to mount it is in the ram air scoop, problem is it's highly visible there, even recessed back as far as it will go. So for the moment I have placed it to one side of the air scoop slightly under the fairing. It's pretty stealthy there, you have to stand a long way back from the bike to be able to see it or get down on your knees and coverage look pretty good too.

I have been using a Cheetah Sentinel on the bike for the last 6 months, which is great on the bike because of the wireless audio alerts. The laser alert has only ever been triggered twice but the second time it stopped me going through the speed limit as I was being scanned. For the time being I'll be using the laser alerts from the Sentinel to check my speed before manually turning the LPP off. That'll have to do untill Cheetah bring out a LaserNode for the LPP.

spankyaf
01-05-2007, 11:56 AM
Damn I cant see your pictures can you shrink them a bit. I'm anxioulsy waiting for the Cheetah Viz alert to come out.

Have you considered using a Ram mount off of the hanldebars?

You're in the UK?

shiggsy
01-05-2007, 01:00 PM
Hi,
yes I'm in the UK.

The pics size should be ok but for some reason it's not always appearing in the thread. If I click on it, it shows up in another window so give that a try.

The Cheetah crash helmet Viz alert is available in the UK now but I'm not so keen on it, probably just because I have got used to using the audio.

spankyaf
01-05-2007, 01:59 PM
Yup got it and you're right scoops your best bet and looks pretty stealthy to me.

FlyinZX-10R
01-07-2007, 04:07 AM
I havent bought a jammer yet, but ive been contemplating where to mount it when i do. I was thinking about the ram air duct, as its centrally located. Not sure if i should put it behind the metal screen, or in front of it. As jammers are illegal where i reside, i was leaning toward behind the screen. Since the screen is recessed a bit from the front of the bike, would this still be an effective location for off axis shots? Pic of front of my bike below in my sig.

spankyaf
01-07-2007, 09:30 AM
First off nice bike. Shiggsy being in the UK is less concerned about the dreaded overpass shot. It's a more common tactic in the US but not a widely practised one as far as I can tell.

Two issues: Is it recessed so far back that it wont be able to detect the off axis shot and will enough light come through the grille to effectively jam.
Unfortunately we dont have alot of bike testing on the board to be able to answer that question.

Why dont you try this take a small flash light and place it in the scoop. Find a quiet dark road put the bike on the centre stand and take a stroll dwon the road. If you can see the flashlight we can assume the jammer will work. Check out the angles.

The grille issue theres no way to tell unless you actually test it. There's a number of guys with guns in the US that will help you test.

Let us know how it works out

shiggsy
01-08-2007, 07:27 AM
It's real difficult to tell where to mount it on a bike untill you end up placing it around the bike and then standing back and looking. I couldn't believe how much the sensor stood out. It's seems to be a trade off of effectiveness against stealth. Infront of the grill will probably stand out too much, not sure how it would be affected behind the grill. There is a picture of a LPP sensor opened up in one of the other threads so maybe check that out and try line the diode and emitter up with the holes in the grill ? Otherwise it may be worth cutting the grill and fitting the sensor flush, but may be that will still be obvious.

RadarRick
01-08-2007, 08:24 AM
Hey sweet ride ZX-10R :wink: Love the black 8)
Yeah, it's a real tough one. Sadly, the front end of most modern sports motorcycles are just not accommodating for such an extra, like a jammer diode or two. My best advice is to put this jammer in your car, where it was intended.
The last thing you want is to have it not working correctly and get done at high speed on the bike. This will solve or prove nothing besides getting you really pissed off :(
RR

spankyaf
01-08-2007, 09:36 AM
I think a neat cut job on th grille would be very stealthy..... hell with all the technology on bikes these days you can claim its a steering damper sensor. It's very unlikely you'd run into a cop aware of both the jammer and bike technology.

I'd do it up here without much worry. Of course you'd need to shut the jammer down once you reached the psl.