View Full Version : Detector Audio / Earphones?
ES13Raven
04-02-2007, 11:27 AM
If you use earphones of some kind for your detector, how do you have it setup?
Do you have earphones installed in your helmet?
Do you put small earphones inside your ear, and then put on your helmet?
Do you have the cord (hanging) plugged directly into the detector, or do you route it through the bike?
RadarRick
04-02-2007, 08:17 PM
I just use the ear-jack supplied with the RD. My STi is pretty loud anyway on full volume, so also, if i use an ear plug in the other ear, it's all good :wink:
RR
shiggsy
04-03-2007, 03:46 AM
I just use an ordinary set of earphones (sony) that came with my mp3 player. I just put the left one in and then put my crash helmet on. The earphones connect to the Cheetah wireless unit I have in my inside jacket pocket.
bushpilot
04-03-2007, 05:01 PM
Ive found that hearphones HURT no matter how good...
i wear ear plugs and then have my valentine one connected
to my autocom intercom system...i set the balance to the
FRONT (driver/rider) so the passenger never hears the detector.
ive used my autocom system on sport bikes and touring bikes.
marker227
04-03-2007, 05:17 PM
They need some kind of system where you can put little pads on your hands and it'll vibrate if you get an alert :).
AirMoore
04-03-2007, 05:44 PM
They need some kind of system where you can put little pads on your hands and it'll vibrate if you get an alert :).
Mehhh...
Too much road vibration IMHO... especially for sportbikes who already have a bit stiffer suspension then ur average cruiser, it may be a bit tough to feel, especially after ur hands go numb from riding them for to long :lol:.
I had a magazine once... where for like ~50bucks there was a unit (about the size of your average 'shift' key)... and it had 3(I believe) rather decent sized LEDs. You plugged it into your RD's headphone output jack (Belscort/V1) and the LED's would light up. I always wanted to give it a try... it seemed as if you could stick it above ur gauge cluster and it would work well.
As for now... I use the earplugs which fit into ur ear. (It converts the mono output to 'stereo'.)
bushpilot
04-03-2007, 06:26 PM
there is a "system" called HARD (Helmet Assisted Radar Detection)
its avail from legal speeding (too)...
http://www.legalspeeding.com/products.htm#HARD
AirMoore
04-03-2007, 06:45 PM
Please do not post websites that compete with the owner of this website ( as Roy also sells that product on his website).
bushpilot
04-03-2007, 09:55 PM
sorry..didnt realize the "rule"...
btw whos cheaper...my link or radar f'in roy ?
marker227
04-03-2007, 10:25 PM
Then how about an electrical current ;).
They need some kind of system where you can put little pads on your hands and it'll vibrate if you get an alert :).
Mehhh...
Too much road vibration IMHO... especially for sportbikes who already have a bit stiffer suspension then ur average cruiser, it may be a bit tough to feel, especially after ur hands go numb from riding them for to long :lol:.
I had a magazine once... where for like ~50bucks there was a unit (about the size of your average 'shift' key)... and it had 3(I believe) rather decent sized LEDs. You plugged it into your RD's headphone output jack (Belscort/V1) and the LED's would light up. I always wanted to give it a try... it seemed as if you could stick it above ur gauge cluster and it would work well.
As for now... I use the earplugs which fit into ur ear. (It converts the mono output to 'stereo'.)
JeepinJeff
04-05-2007, 12:18 PM
Does anyone know the manufacturer's website for the hard system?
ES13Raven
04-05-2007, 01:22 PM
Does anyone know the manufacturer's website for the hard system?
http://www.legalspeeding.com/
JeepinJeff
04-06-2007, 08:12 AM
Does anyone know the manufacturer's website for the hard system?
http://www.legalspeeding.com/Thank ya sir.
FlyinZX-10R
04-06-2007, 08:36 AM
I would go with the Vizalert (when its available) over the HARD system anyday.