PDA

View Full Version : Help!!! Install not working for my LI...



Ortoch
12-03-2007, 10:29 PM
Ok I installed my LI system with 4 heads on it. Well everything is fed into the passenger side fuse box inside my car and all plugged in. I have 4 telephone type wires going into the port slots and one white multi wire plug going into the power/everything else slot. Well I took the 2 black wires off of the white connector and grounded them and took the red wire and put it into a fuse adder thingy that is what I use another of for my beltronics STI. Well I got all that plugged in and now its not working... is that because I am not using the 2 blue speaker wires? Well any advice or a detailed install explination would help.

Thanks

Serg
12-03-2007, 10:41 PM
Ok I installed my LI system with 4 heads on it. Well everything is fed into the passenger side fuse box inside my car and all plugged in. I have 4 telephone type wires going into the port slots and one white multi wire plug going into the power/everything else slot. Well I took the 2 black wires off of the white connector and grounded them and took the red wire and put it into a fuse adder thingy that is what I use another of for my beltronics STI. Well I got all that plugged in and now its not working... is that because I am not using the 2 blue speaker wires? Well any advice or a detailed install explination would help.

Thanks

Before you do anything read users manual. There is a copy at http://www.laser-interceptor.co.uk/user_manual.html If you are 100% sure that its got power and its properly grounded then I would say that you blew fuse (there should be one inside the CPU box). I'm pretty sure that Ivan will be on site sometimes soon and will help you with this.

Ortoch
12-03-2007, 10:44 PM
Yes I read that already, I have 2 black grounded wires, 1 red powered wire with a 10 fuse... not sure what the 10 stands for but its what my beltronics ran on. And then there 2 blue wires that go to nothing. Also I have the on off switch but no LED or message happens.

Serg
12-03-2007, 10:46 PM
Yes I read that already, I have 2 black grounded wires, 1 red powered wire with a 10 fuse... not sure what the 10 stands for but its what my beltronics ran on. And then there 2 blue wires that go to nothing. Also I have the on off switch but no LED or message happens.

10 stands for amps, so its 10 amps. did you check the fuse?
Don't worry about blue wires, they are for radio mute.

Look at the diagram and make sure that everything is plugged in correctly and the fuse is not blown.
http://picasaweb.google.com/sboiko18/Random/photo#5139986395093638834

rsatmans
12-03-2007, 11:05 PM
Check fuse, and test wiring to make sure it's getting power.

Ortoch
12-04-2007, 12:00 AM
rsatmans THANK YOU!!! haha it was the fuse slot... even though there was a 10 amp fuse there already the slot had no power :) works now like a charm but theres one thing... Not taht i bought it for this but how does the parking assistant part of it work? Everytime I turn it on after 3 seconds it says "Parking something disabled"... is that normal?

noTe
12-04-2007, 12:21 AM
rsatmans THANK YOU!!! haha it was the fuse slot... even though there was a 10 amp fuse there already the slot had no power :) works now like a charm but theres one thing... Not taht i bought it for this but how does the parking assistant part of it work? Everytime I turn it on after 3 seconds it says "Parking something disabled"... is that normal?

It's normal.

rsatmans
12-04-2007, 12:39 AM
rsatmans THANK YOU!!! haha it was the fuse slot... even though there was a 10 amp fuse there already the slot had no power :) works now like a charm but theres one thing... Not that i bought it for this but how does the parking assistant part of it work? Every time I turn it on after 3 seconds it says "Parking something disabled"... is that normal?

No problem it happens to all of us :oops: . The parking sensor is in normal operation, still waiting for software to tweak a few of those settings :D . Good luck and have fun with your new LI

Holla
12-04-2007, 12:55 AM
Post up a picture of your install :D

Ortoch
12-04-2007, 01:16 AM
I just posted the pics up :) http://www.radardetector.net/viewtopic.php?p=341997#341997