Results 1 to 10 of 10
  1. #1
    Newcomer
    Join Date
    Nov 2007
    Posts
    29

    Default Help!!! Install not working for my LI...

    Ok I installed my LI system with 4 heads on it. Well everything is fed into the passenger side fuse box inside my car and all plugged in. I have 4 telephone type wires going into the port slots and one white multi wire plug going into the power/everything else slot. Well I took the 2 black wires off of the white connector and grounded them and took the red wire and put it into a fuse adder thingy that is what I use another of for my beltronics STI. Well I got all that plugged in and now its not working... is that because I am not using the 2 blue speaker wires? Well any advice or a detailed install explination would help.

    Thanks

  2. #2
    Lead Foot
    Join Date
    Nov 2006
    Location
    MN
    Posts
    419

    Default Re: Help!!! Install not working for my LI...

    Quote Originally Posted by Ortoch
    Ok I installed my LI system with 4 heads on it. Well everything is fed into the passenger side fuse box inside my car and all plugged in. I have 4 telephone type wires going into the port slots and one white multi wire plug going into the power/everything else slot. Well I took the 2 black wires off of the white connector and grounded them and took the red wire and put it into a fuse adder thingy that is what I use another of for my beltronics STI. Well I got all that plugged in and now its not working... is that because I am not using the 2 blue speaker wires? Well any advice or a detailed install explination would help.

    Thanks
    Before you do anything read users manual. There is a copy at http://www.laser-interceptor.co.uk/user_manual.html If you are 100% sure that its got power and its properly grounded then I would say that you blew fuse (there should be one inside the CPU box). I'm pretty sure that Ivan will be on site sometimes soon and will help you with this.

  3. #3
    Newcomer
    Join Date
    Nov 2007
    Posts
    29

    Default

    Yes I read that already, I have 2 black grounded wires, 1 red powered wire with a 10 fuse... not sure what the 10 stands for but its what my beltronics ran on. And then there 2 blue wires that go to nothing. Also I have the on off switch but no LED or message happens.

  4. #4
    Lead Foot
    Join Date
    Nov 2006
    Location
    MN
    Posts
    419

    Default

    Quote Originally Posted by Ortoch
    Yes I read that already, I have 2 black grounded wires, 1 red powered wire with a 10 fuse... not sure what the 10 stands for but its what my beltronics ran on. And then there 2 blue wires that go to nothing. Also I have the on off switch but no LED or message happens.
    10 stands for amps, so its 10 amps. did you check the fuse?
    Don't worry about blue wires, they are for radio mute.

    Look at the diagram and make sure that everything is plugged in correctly and the fuse is not blown.
    http://picasaweb.google.com/sboiko18...86395093638834

  5. #5
    Professional
    Join Date
    Feb 2007
    Posts
    881

    Default

    Check fuse, and test wiring to make sure it's getting power.

  6. #6
    Newcomer
    Join Date
    Nov 2007
    Posts
    29

    Default

    rsatmans THANK YOU!!! haha it was the fuse slot... even though there was a 10 amp fuse there already the slot had no power works now like a charm but theres one thing... Not taht i bought it for this but how does the parking assistant part of it work? Everytime I turn it on after 3 seconds it says "Parking something disabled"... is that normal?

  7. #7
    Radar Fanatic
    Join Date
    May 2007
    Location
    JTGville, USA
    Posts
    1,500

    Default

    Quote Originally Posted by Ortoch
    rsatmans THANK YOU!!! haha it was the fuse slot... even though there was a 10 amp fuse there already the slot had no power works now like a charm but theres one thing... Not taht i bought it for this but how does the parking assistant part of it work? Everytime I turn it on after 3 seconds it says "Parking something disabled"... is that normal?
    It's normal.

  8. #8
    Professional
    Join Date
    Feb 2007
    Posts
    881

    Default

    Quote Originally Posted by Ortoch
    rsatmans THANK YOU!!! haha it was the fuse slot... even though there was a 10 amp fuse there already the slot had no power works now like a charm but theres one thing... Not that i bought it for this but how does the parking assistant part of it work? Every time I turn it on after 3 seconds it says "Parking something disabled"... is that normal?
    No problem it happens to all of us ops: . The parking sensor is in normal operation, still waiting for software to tweak a few of those settings . Good luck and have fun with your new LI

  9. #9
    Professional
    Join Date
    Aug 2005
    Location
    Anchorage, Alaska
    Posts
    1,320

    Default

    Post up a picture of your install

  10. #10

 

 

Similar Threads

  1. V1 not working right?
    By ssj92 in forum Valentine One
    Replies: 34
    Last Post: 05-06-2012, 12:01 AM
  2. how do i know my Li is working?
    By dfwerdoc in forum Laser Interceptor
    Replies: 5
    Last Post: 03-02-2011, 10:15 PM
  3. V1 not working?
    By FoxRodder in forum Valentine One
    Replies: 16
    Last Post: 03-04-2007, 04:05 PM
  4. Got my V1, is it working even??
    By kaiserjacob in forum Valentine One
    Replies: 10
    Last Post: 04-19-2005, 01:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •