View Full Version : 9500i not loud enough on motorcycle
Dagwood
05-16-2008, 08:04 PM
Just got a new 9500 and hooked the external speaker to my StarCom1 Digital Com System. Everything works fine , but the RD is not near loud enough to hear above the wind noise, even when vol on wide open.
Any clues what to do???
bushpilot
05-18-2008, 03:53 PM
its probably the detector more than anything....
i use my valentine 1, w/ an autocom intercom system...
the valentine one "remote audio" adapter allows the
audio to be boosted enough that even when i wear
earplugs i can hear the detector...in fact w/ the
remote audio adapter i & ear plugs i dont typically
run the volume more than 50%
https://store.valentine1.com/store/products/20200h.jpg
you could try boosting the audio <from the detector into
the intercom>...that would confirm the problem is w/ the
detectors audio output level.
http://www.boostaroo.com/store_detail.php4?id=14
http://www.boostaroo.com/products/gray_boostaroo.jpg
spankyaf
05-20-2008, 03:28 PM
I'm getting old I guess but I'm worried about my hearing after long rides.
I've gone Viz alert and no sound at all just ear plugs
Dagwood
05-20-2008, 08:55 PM
I think I may have the wrong cable. I used a 3.5 to 3.5 stereo cable when I shoulda used a mono cable. Got one ordered.
In the mean time I bought a visial alert and kinda like it. The wifey and I use a intercom and I don't think I want the RD kicking in while we're talking.
Truthalive7
06-02-2008, 12:04 PM
You should try the Radar screamer. I use it on my CBR600rr, which has aftermarket exhaust, and I can always hear the signals loud and clear. It also has a volume/mute switch that is easy to install and inconspicuous. I use it with an rx65 and it works great. The only thing I don't like about it is the the voice alerts do not come through it, just the beep signals.
Freebird
06-02-2008, 12:47 PM
In the meantime you can use a standard walkman or ipod speaker in your helmet. you will only get sound in one speaker since its mono, but I mounted both speakers behind my earpads in my helmet and plug directly into external speaker jack on rd. Gives plenty of volume until you get your external power speaker setup completed.
AirMoore
06-03-2008, 05:56 PM
In the meantime you can use a standard walkman or ipod speaker in your helmet. you will only get sound in one speaker since its mono, but I mounted both speakers behind my earpads in my helmet and plug directly into external speaker jack on rd. Gives plenty of volume until you get your external power speaker setup completed.
RS also sells a mono-to-'stereo' output on this, though its not true stereo... its just a couple bucks.
CJR238
06-05-2008, 03:29 PM
I think I may have the wrong cable. I used a 3.5 to 3.5 stereo cable when I shoulda used a mono cable. Got one ordered.
X2, definitely need a mono, or your only getting 1/2 power I believe.