PDA

View Full Version : Why is the ZR4...



Qui-Gon
05-21-2008, 07:33 PM
...showing up on our RD's as a ZR3 when linked??? I have seen several posts by current ZR4 owners saying this is occuring, and just want to make sure I'm not gonna get screwed. Thanks guys!

Victor

Retaliation
05-21-2008, 07:49 PM
I'm sure it has to do with the fact that all of our RDs were programmed and manufactured before the ZR4 was available.

crazyVOLVOrob
05-21-2008, 10:19 PM
Pretty sure it works as described when we hooked the escort zr3 up to the BEL STi the BEL said it was the Laser pro 904...not the 905

SmaartAasSaabr
05-21-2008, 10:46 PM
Yeah it seems it just identifies itself as "the jammer" and the detector is programmed to make the displays.

Lucky225
05-21-2008, 11:17 PM
Yea, as long as the jammer it's self is controlled by seperate control module and not the detector it's self so the pulses are correct, all should be good.

kpatz
05-22-2008, 07:55 AM
The detector merely gets a signal that says "jammer is present" or "jammer is jamming". The detector itself "assumes" that it's the model of jammer that was made when the RD was made, so an X50 will say "ZR3" because it's hard coded in the X50's firmware. But the ZR4 will still be a ZR4, even if it's plugged into a RD that says it's a ZR3.

Qui-Gon
05-22-2008, 09:30 AM
The detector merely gets a signal that says "jammer is present" or "jammer is jamming". The detector itself "assumes" that it's the model of jammer that was made when the RD was made, so an X50 will say "ZR3" because it's hard coded in the X50's firmware. But the ZR4 will still be a ZR4, even if it's plugged into a RD that says it's a ZR3.

That clears up alot...just wanted to be sure! Thanks!