PDA

View Full Version : Leveling 9500ci/ZR4/ZR3 front shifter heads...



MEM-TEK
07-05-2008, 12:50 AM
Hi everyone,

Note: This is an expanded duplicate of a post I made on the "other" forum since the topic came up.

Just before I flew out to SML, I was getting quite nervous regarding installing the 9500ci for the SML test and had a few questions since I have never installed a laser jammer before. Aside from wanting to know how long the various cables were (all are really long), I wanted to know whether or not I should check the level of the shifter heads by placing my small bubble level on the top or bottom surface of the shifter heads. So, I called Escort CS, explained who I was and that I had been approved to go to SML since their engineer couldn't attend SML, and that I had some questions. In truth I was beginning to freak out since I realized that it was going to be entirely up to me to assure that the Bel and Escort products were properly set up for testing -- and me knowing next to nothing about laser jammers!

Anyway, I got to talk to the engineer who originally was supposed to attend SML yet couldn't for whatever reason. He had been looking forward to attending SML and wasn't very happy that he couldn't attend. Yet he was happy to learn that years ago I used to work at a car stereo shop and had performed many custom car stereo installations and that I seemed to have a fully functional brain in my head.

Apparently the ZR3 and ZR4 front jammer heads are the same size and use the same external cases. The engineer mentioned that the top and bottom sides of the cases are not parallel but instead have a very slight slope or bevel relative to each other. This is due to the requirement for easy release from the injection molding die. The engineer told me to place my bubble level against the top side of the front shifter cases since the internal emitting LEDs are mounted parallel to the top side of the cases. The top sides of the cases have "THIS SIDE UP" stamped on them.

The level which I used at SML is a fairly small white pen level which I purchased from my local Ace Hardware store. It is a very accurate level considering its rather cheap price. We use them on our astronomical telescopes to indicate when the telescope is pointing straight up at the zenith. Using these levels, our telescopes are always pointing somewhere within their 20 arc minute (1/3 of a degree) field of view. That is pretty darned good for cheap levels!

I just got done measuring the front and rear thicknesses of the 9500ci front shifter head cases, and the depth of the shifter heads. I have calculated that there is a 1.7 degree angle difference between the top and the bottom sides of the shifter housings. That is significant. Assuming that you accidentally level your shifter heads by holding a level against the shifter case's bottom surface, then at 500 feet the most intense output of the head will be located at a point 14.8 feet below the installed height of your shifter head. This of course assumes that you are traveling on a flat roadway. At 800 feet (the average laser shot distance) then the most intense portion of your shifter head beams will be pointing nearly 24 feet below the installed height of your shifter heads!

I am heading out of town tomorrow to see my father one last time before he flies out of town, but when I return I will be taking apart one of the ZR4 shifter heads to confirm that its emitting LEDs are indeed aligned parallel relative to the top surface of the case. Nevertheless, I thought that I would pass this tidbit of information along to all of you who own ZR3, ZR4 or 9500ci systems. Escort's engineer said that leveling using the top side of the shifter cases results in very accurate leveling of the shifters.

On a side note, for those of you who must hold the Ace level against the bottom side of your shifters, I will slew one of our telescopes exactly 1.7 degrees north of the zenith and then take a photograph to show the exact displacement of the level's bubble. That way you can use the photo as a reference and level your shifters using the bottom side of the shifter housings.

Additionally, I want to create a spreadsheet which you can download. The spreadsheet will allow you to input the installed height of your front shifter/jammer heads, the average distance of laser shots in your locale, and the normal height of the laser gun (officer standing hand-held or officer seated in patrol car hand-held) in order to calculate the ideal very slight upward tilt for your shifter/jammer heads to assure maximum emitted signal intensity toward the laser gun. Hopefully this info will allow everyone, regardless of what shifter/jammer product they own, to fully tweak their present setup once they have their shifter/jammer heads installed in ideal locations.

:)

thestaton
07-05-2008, 08:21 AM
wow, great info.

focalcivic
07-05-2008, 08:16 PM
According to Escorts site the ZR4 front heads are smaller than the ZR3's I am pretty certain I read this.

Maybe you spoke to the OLd Bag pretending to be the engineer LOL.

As for taking apart the heads I would not plan on trying to put them back together and using them.

ZR4:
Dimensions (inches)
* Front Laser Transceivers: 3.760 x 1.660 x 0.677


ZR3:
Dimensions (inches)
* Front Laser Transceivers: 4.65 x 1.8 x 0.8

TSi+WRX
07-07-2008, 10:43 AM
Great info. and tips, MEM-TEK.

----

focal - that's very strange, indeed..... Does anyone here have both the ZR3, and the ZR4, to cross-check and see what set of data is actually correct?

Speaking of cross-checking, it's a good thing that MEM-TEK did this for us, for the "leveling" issue, with relation to the product's casing. Indeed, this is one of those areas where Escort, I feel, truly has to step-up and make better. In many cases, the advice that their own technical crew passes along to us end-users either conflicts with or is not in-line with what's in the product's manuals and other "officially" published sources of information (this particular issue of the physical dimensions of the front heads' casings is just one such illustration).

I am most eager, MEM-TEK for the cross-confirmation that, indeed, the ZR4 is an LED-based jammer, too.

Ahujadaddy
07-09-2008, 02:45 PM
when using a bubble level to align the heads, doesn't it also matter how level the road is that your car is on at time of install.

seems like it shouldnt matter because you are aligning in proportion to the car. so can you install parked on an uphill driveway or something... any more tips or advice here?

also, how do you fine tune and adjust the level of the heads? is there like a screw or something?

I wish someone local here had a laser jammer on their car and that i could see it in person. it would help alot. All the car meets i been to here, no one has one.

Retaliation
07-09-2008, 03:32 PM
Here's a thought on a good place to get a level surface for your car to sit on while you check your jammer heads. The concrete slab between the gas pumps at newer stations is going to be very level. Maybe while you fill up you could take advantage of the level surface to check the position of your heads. :)

focalcivic
07-09-2008, 07:42 PM
when using a bubble level to align the heads, doesn't it also matter how level the road is that your car is on at time of install.

seems like it shouldnt matter because you are aligning in proportion to the car. so can you install parked on an uphill driveway or something... any more tips or advice here?

also, how do you fine tune and adjust the level of the heads? is there like a screw or something?

I wish someone local here had a laser jammer on their car and that i could see it in person. it would help alot. All the car meets i been to here, no one has one.

Start off with a flat level road. Many heads differ, some have side screws that you can loosen level then tighten up. If you use tape use little pieces of tape like shims to get it level. If you have them mounted with metal brackets you can bend the bracket slightly.

LatinMax
07-10-2008, 05:09 PM
I have looked and ca't find it. if it has been posted already, sorry.
But how long do you have on the ZR4 to ajust your speed once jamming starts. I think it is call punch thru. I call CM and they claimed 60 seconds.
I have the blinder and though they claimed 15 seconds. I thought that was a long time, but WOW 60 seconds!?!?!?

Just trying to make a comparison, if possble.

Retaliation
07-10-2008, 05:37 PM
I have looked and ca't find it. if it has been posted already, sorry.
But how long do you have on the ZR4 to ajust your speed once jamming starts. I think it is call punch thru. I call CM and they claimed 60 seconds.
I have the blinder and though they claimed 15 seconds. I thought that was a long time, but WOW 60 seconds!?!?!?

Just trying to make a comparison, if possble.

There is no set period of time before a punch through happens. This depends on a variety of factors including, but certainly not limited to, what laser gun the cops are using, how inherently reflective your vehicle is, how far away they're targeting you, etc...

Basically, if your jammer/detector starts going off, slow down to the posted speed limit as quickly as possible and switch off your jammer.

Hopefully if this happens your countermeasures have provided enough time for you to slow down before the officer gets a speed reading. :)

LatinMax
07-11-2008, 12:45 AM
There is no set period of time before a punch through happens. This depends on a variety of factors including, but certainly not limited to, what laser gun the cops are using, how inherently reflective your vehicle is, how far away they're targeting you, etc...

Basically, if your jammer/detector starts going off, slow down to the posted speed limit as quickly as possible and switch off your jammer.

Hopefully if this happens your countermeasures have provided enough time for you to slow down before the officer gets a speed reading. :)

I understand all that. But how much time to you have before the jamming stops and they can get a reading off of you. with the Blinder you don't get anymore than 15 seconds. CM claims 60 seconds. I find that hard to beleive.
Any idea?

AirMoore
07-11-2008, 09:40 AM
Great info. and tips, MEM-TEK.

X2 This is really good info.


focal - that's very strange, indeed..... Does anyone here have both the ZR3, and the ZR4, to cross-check and see what set of data is actually correct?

Speaking of cross-checking, it's a good thing that MEM-TEK did this for us, for the "leveling" issue, with relation to the product's casing. Indeed, this is one of those areas where Escort, I feel, truly has to step-up and make better. In many cases, the advice that their own technical crew passes along to us end-users either conflicts with or is not in-line with what's in the product's manuals and other "officially" published sources of information (this particular issue of the physical dimensions of the front heads' casings is just one such illustration).

I am most eager, MEM-TEK for the cross-confirmation that, indeed, the ZR4 is an LED-based jammer, too.

Also I really wish someone could take apart a ZR3 too... this way it could confirm/dispel whether or not the ZR4 is just a ZR3 with different algorithms. If they are the same size (unlike Escorts Website), and they are identical looking on the inside, its very likely they are just different algorithms... which would be pitiful from Escort for the amount of time it took to get the ZR4 out...


I agree also that on their (newer) products Escort really lets its customers down with accurate information. One minute you could call, get customer Service person A, then right after call and get someone who says the exact opposite.


For example, I bet if someone calls and asks if you can level your jammer heads using the bottom side... they wont say one peep about the issue with the molds causing the top-side to be the correct side to level their jammers.

MEM-TEK
07-11-2008, 10:01 AM
I have looked and ca't find it. if it has been posted already, sorry.
But how long do you have on the ZR4 to ajust your speed once jamming starts. I think it is call punch thru. I call CM and they claimed 60 seconds.
I have the blinder and though they claimed 15 seconds. I thought that was a long time, but WOW 60 seconds!?!?!?

Just trying to make a comparison, if possble.

Hi LatinMax,

Welcome aboard! :D

Both the ZR4 and the 9500ci perform shifting for up to 60 seconds, giving you enough time to drive through and past the laser speed trap. You can instantly kill the shifting operation (but you will still get the laser detection alerts) once you have adjusted your speed by simply hitting the mute button twice. The ZR4 has a mute button on its display panel, and the ZR4 includes a separate mute button which you can mount in a more convenient location within your car. The 9500ci of course has a small multi-function control module which you should mount in a location which is easily reached while driving. Many forum members recommend killing your shifters or jammers as soon as possible so that the officer doesn't know that he/she was being temporarily jammed.

MEM-TEK
07-11-2008, 10:05 AM
I found out that the ZR3 and ZR4 front heads are indeed different sizes and that the electronics boards inside them are different too. I thought that I would pass this bit of info along in order to clear up some confusion about the differences between the ZR3 and ZR4 products. :)

AirMoore
07-11-2008, 10:12 AM
I found out that the ZR3 and ZR4 front heads are indeed different sizes and that the electronics boards inside them are different too. I thought that I would pass this bit of info along in order to clear up some confusion about the differences between the ZR3 and ZR4 products. :)


That is very nice to know... I really hope the ZR4 performs at GOL, because I am chomping at the bits to get a jammer before this upcoming semester (and the gauntlet from State Troopers on my 150Mile [one-way] Thruway trip)... also of course hoping GOL is soon.

TSi+WRX
07-11-2008, 12:44 PM
I found out that the ZR3 and ZR4 front heads are indeed different sizes and that the electronics boards inside them are different too. I thought that I would pass this bit of info along in order to clear up some confusion about the differences between the ZR3 and ZR4 products. :)

Thanks for the clarification! :)

Only one remaining - so, the ZR4, still LEDs, right?

focalcivic
07-11-2008, 03:49 PM
I found out that the ZR3 and ZR4 front heads are indeed different sizes and that the electronics boards inside them are different too. I thought that I would pass this bit of info along in order to clear up some confusion about the differences between the ZR3 and ZR4 products. :)


I am still trying to figure out whom you originally spoke to and said that the heads were the same size, I can not believe an engineer would make a mistake like that.

MEM-TEK
07-12-2008, 08:27 PM
I am still trying to figure out whom you originally spoke to and said that the heads were the same size, I can not believe an engineer would make a mistake like that.

That was completely my own snafu and wasn't one of Belscort's engineers. Sorry! My bad. :(

To answer TSi+WRX's question, the ZR4 uses multiple conventional LED IR emitters rather than LED diode laser emitters. Do you all recall where, a while back, I mentioned that LED both stands for Light Emitting Diode and Laser Emitting Diode? Do you all also recall that I proposed "CLED" to indicate jammer systems which incorporate Coherent Light Emitting Diodes (which are always laser diodes)? CLED isn't (yet) and accepted term, but I think that it is needed in order to prevent confusion amongst both the general public and lawmakers about the differences between standard IR light emitting diodes and actual coherent radiation laser light emitting diodes. Standard IR light emitting diodes are completely safe for the human eye, yet coherent radiation laser light emitting diodes potentially could be unsafe if the human eye is exposed up close to their emissions for more than 30 to 60 seconds. Again, there are no safety issues with conventional IR light emitting diodes.

djrams80
07-12-2008, 08:47 PM
My ZR4s performed better than my ZR3s when I tested each against the UL on my car. Also, my ZR4s are much more sensitive to LCCs than my ZR3s were. I've been saying for a while that I'm pretty sure the ZR4s are not the same as the ZR3s, but my evidence thus far is far from rock solid, so I haven't pushed it.

focalcivic
07-13-2008, 03:06 AM
My ZR4s performed better than my ZR3s when I tested each against the UL on my car. Also, my ZR4s are much more sensitive to LCCs than my ZR3s were. I've been saying for a while that I'm pretty sure the ZR4s are not the same as the ZR3s, but my evidence thus far is far from rock solid, so I haven't pushed it.

I really think they are different products, there is no conspiracy going on, but the LED jammers have limits.

DJ give me an idea of PT distance for the UL.

djrams80
07-13-2008, 10:15 AM
I really think they are different products, there is no conspiracy going on, but the LED jammers have limits.

DJ give me an idea of PT distance for the UL.Here is the thread talking about the last time my brother and I were firing the UL at my ZR3s. Basically, we were getting about 600ft PTs with the front CR8APL8 on and about 150ft or so with it removed:

http://www.radardetector.net/forums/laser-jammers/34501-last-set-tests-my-zr3s.html

My brother and I tested the ZR4s against the UL and there were no PTs higher than 300ft, with my CR8APL8 installed:

http://www.radardetector.net/forums/detector-counter-measure-videos/34575-zr4-vs-stalker-7.html

Here is a summary of with RacerX doing most of the shooting of my car. He is a much better shot than either my brother or I are, which makes sense due to his vast experience. They are his guns afterall:

http://www.radardetector.net/forums/escort/35030-9500ci-laser-jamming-test-summary.html

springadv
07-13-2008, 10:48 AM
Doesn't it depend on the time between when the jammer first detects the laser gun and the time of punch through ? Which brings up this question: can some laser guns detect the jammer even if its not getting a speed reading = is the jammer jammiing both detection and speed reading until punch through ?

djrams80
07-13-2008, 11:10 AM
Doesn't it depend on the time between when the jammer first detects the laser gun and the time of punch through ?
The time that it takes for the LEO to attain PT is very important, of course. However, that's not how we test laser jammers. We test jammers such that we start at a certain distance, whatever that is, then we constantly try to attain a speed reading and record the distance at which PT(punch through, or speed reading) is attained. This gives us consistent, repeatable, understandable results. Trying to measure jamming time would make for extremely inconsistent results, since different tests would have different starting distances, different courses, and a myriad of other variables. No test results would look like any other test results.

Which brings up this question: can some laser guns detect the jammer even if its not getting a speed reading = is the jammer jammiing both detection and speed reading until punch through ?Some laser guns do have jam codes. Laser jammer companies do a pretty good job of avoiding these jam codes. Also, jam codes often come up during normal laser gun operation. Basically jam codes are not very reliable and are pretty much ignored by the laser gun operator. They are definitely not a sure fire way to determine if the targeted vehicle has a laser jammer or not.

TSi+WRX
07-15-2008, 10:22 AM
To answer TSi+WRX's question, the ZR4 uses multiple conventional LED IR emitters rather than LED diode laser emitters.

Thanks for the verification! :)



Do you all recall where, a while back, I mentioned that LED both stands for Light Emitting Diode and Laser Emitting Diode? Do you all also recall that I proposed "CLED" to indicate jammer systems which incorporate Coherent Light Emitting Diodes (which are always laser diodes)? CLED isn't (yet) and accepted term, but I think that it is needed in order to prevent confusion amongst both the general public and lawmakers about the differences between standard IR light emitting diodes and actual coherent radiation laser light emitting diodes.

Oh yes, I do remember. :) And as with then, I completely and totally agree with you that better terminology is required in order to facilitate discussions, now that we have both types of jammers readily on the market...and so many to choose from!

TSi+WRX
07-15-2008, 10:25 AM
FWIW,

I also don't subscribe to the conspiracy theories.

I do think that the ZR4 is an evolutionary product, and that it does incorporate features and designs to help it be a "step up and step beyond" the ZR3, and I am glad that fellow hobbyists/enthusiasts like you have been able to see a true performance improvement. :)

However, with the issue of integration (with the 9500i/ix/ci) aside, I am disappointed that it hasn't currently been shown to perform better, particularly when price is factored into the equation.

Given the incremental performance of the ZR4, I do think that when my ZR3s finally bite the dust, I will update to the ZR4. However, I do not necessarily think that my own decision to "re-up" on this will be reflected by others' actions - I am a hobbyist in this field, and as such, I do tend to devote a chunk of my disposable income to its wares. Again, with the thought of integration cast aside, I am not sure, in today's market, how price-competitive the ZR4 truly is, and if I were not coming at this "re-purchase" with the same angle I am doing so, now, I honestly don't know if I'd select the ZR4.