View Full Version : Can i get JTG with just an LI Quad and no Veil?
mrcllusb
04-18-2009, 08:35 PM
http://i156.photobucket.com/albums/t14/mrcllusb/Milanfront.jpg http://i156.photobucket.com/albums/t14/mrcllusb/Milanrear.jpg
As most of you know i'm switching out my RX75 Pro Plus system with the ZR3's for a V1 and either LI or Blinder combo.I'm thinking that LI will be my only option if i go the no Veil option.
Z1NONLY
04-18-2009, 08:36 PM
Yes.:) (Although head placement on the rear looks tough)
crazyVOLVOrob
04-18-2009, 08:37 PM
yes
mrcllusb
04-18-2009, 08:38 PM
Hey Rob you've been giving me advice since post #1:D.Where would you place the LI heads?
crazyVOLVOrob
04-18-2009, 08:42 PM
Hey Rob you've been giving me advice since post #1:D.Where would you place the LI heads?
Ask Cliff he would have the best idea
mrcllusb
04-18-2009, 08:44 PM
Alright.I'm sure he'll be checking in here sometime soon..
category4
04-18-2009, 08:49 PM
Should be no trouble for the LI to give you JTG/JFG performance on that car, unless of course you show up for one of the Atlanta area testing session, then we can guarantee a 1000' PT. :D
Laser-InterceptorUSA
04-18-2009, 09:00 PM
Checking in..... :) Here are my recommended install locations. Either #1, vertically in the grill with the Sensor bubbles up or, #2, horizontally under the bumper with the Sensor bubbles outwards towards the headlights.
As to the rear, you can use the rear Slim Sensor mounting brackets to facilitate an install much like on my car to get the Sensors closer to the Achilles heal of the rear of most vehicles with large taillights #1 directly under the taillights, or, #2, on the top of the bumper both with the Sensor bubbles inwards or, finally, #3, the traditional location above the LP which is the least effective, Sensor bubbles outwards.
http://img19.imageshack.us/img19/6149/milanfront.jpg
http://img14.imageshack.us/img14/9448/milanrear.jpg
BTW, Black is a GREAT color for LCM!
Cliff - LI-USA/LI-UK
mrcllusb
04-18-2009, 09:06 PM
That is my exact Milan to the T,except my windows are tinted and i have chrome exhaust tips.
speed-dreams
04-18-2009, 09:08 PM
You can but testing would reassure you will JTG... If you don't test your setup, there are no guarantees.
mrcllusb
04-18-2009, 09:09 PM
Hey Cliff.On the front,does either Horizontal or Vertical offer better protection over the other?I do run a front plate being my vehicle is registered in NY.
speed-dreams
04-18-2009, 09:20 PM
Hey Cliff.On the front,does either Horizontal or Vertical offer better protection over the other?I do run a front plate being my vehicle is registered in NY.
Horizontal>Vertical
mrcllusb
04-18-2009, 09:22 PM
You can but testing would reassure you will JTG... If you don't test your setup, there are no guarantees.
I'm in the military,so it makes it kinda hard to get to Atlanta for testing.If i'm correct,they're isn't anyone in Savannah with a Lidar gun..
newkid
04-18-2009, 09:30 PM
As to the rear, you can use the rear Slim Sensor mounting brackets to facilitate an install much like on my car to get the Sensors closer to the Achilles heal of the rear of most vehicles with large taillights #1 directly under the taillights, or, #2, on the top of the bumper both with the Sensor bubbles inwards or, finally, #3, the traditional location above the LP which is the least effective, Sensor bubbles outwards.
http://img14.imageshack.us/img14/9448/milanrear.jpg
BTW, Black is a GREAT color for LCM!
Cliff - LI-USA/LI-UK
Hey cliff, how would the rear mount look right under the tail lights? Just thinking wouldn't blend in....
category4
04-18-2009, 09:32 PM
I get to the Savannah area once or twice a year, I'll PM you next time I am down that way and we can test it then if you like. I also think Rsatmans has family in that area and I would be happy to loan him my guns if he has time to meet up with you when he is in the area.
Laser-InterceptorUSA
04-18-2009, 09:33 PM
Hey cliff, how would the rear mount look right under the tail lights? Just thinking wouldn't blend in....
They will! Especially on a black car! Here is my install and at 70 MPH, not a soul will notice them! Imagine my car in black! :)
http://img25.imageshack.us/img25/1217/c55rearinstall1.jpg
Cliff - LI-USA/LI-UK
mrcllusb
04-18-2009, 09:35 PM
I get to the Savannah area once or twice a year, I'll PM you next time I am down that way and we can test it then if you like. I also think Rsatmans has family in that area and I would be happy to loan him my guns if he has time to meet up with you when he is in the area.
Thanks bro,i really appreciate it.I've been wondering how bad my ZR3's would do:o
newkid
04-18-2009, 09:40 PM
I got my new requirements for my new car --- BLACK color :)
Z1NONLY
04-18-2009, 09:45 PM
Thanks bro,i really appreciate it.I've been wondering how bad my ZR3's would do:o
The rear head could protect the plate and only the plate.
If you could swap out the bling grill for something less reflective, the ZR3's front heads could do well.
mrcllusb
04-18-2009, 09:47 PM
They don't make a less bling grill,only a more bling..The grill isn't chrome,it's a plastic silver.
category4
04-18-2009, 09:48 PM
Veil the headlights and tail light assemblies and the ZR3's might do quite well. Only testing will tell though.
mrcllusb
04-18-2009, 09:57 PM
I'm trying to stay away from the whole Veil thing.I have an airbrush artist that said they would do it for me for a lil pocket change,but i'm looking for laser protection that can do it on it's own without and additions.Worst case scenario,i mount a single LI head over the plate and Veil just the rear tail lights.
mrcllusb
04-18-2009, 09:58 PM
Veil the headlights and tail light assemblies and the ZR3's might do quite well. Only testing will tell though.
I'm pulling out my RX75 to make room for a new setup.I've had it for awhile and looking to just change my setup.
oahuyahoo
04-19-2009, 03:46 PM
I thought my vette was hard, I wouldn't want that install.
mrcllusb
04-19-2009, 08:16 PM
I thought my vette was hard, I wouldn't want that install.
Yeah the rear on the Milan is a lil tough if you don't want the heads sticking out from your tail lights without Veil.
Yes, JTG for sure with proper placement