Sensitivity Help

[Ace_Racer]

Hello,

I have a question reguarding the sensivity on the Bel Pro RX65. First, KA is my biggest and only threat. Second, if I disable ALL other bands including laser, pop, sws, and ku will the KA sensitivity be dramatically or very little increased. I am thinking somewhat because KA would be the only band it would be looking for. All of your help would be appreciated!

Sincerely,

Ace

[jimbonzzz]

Hello,

I have a question reguarding the sensivity on the Bel Pro RX65. First, KA is my biggest and only threat. Second, if I disable ALL other bands including laser, pop, sws, and ku will the KA sensitivity be dramatically or very little increased. I am thinking somewhat because KA would be the only band it would be looking for. All of your help would be appreciated!

Sincerely,

Ace

Very little, if at all.

First, the software would have to be set up to actually change the sweep if these bands are disabled. In some detectors, turning off bands only disables the -reporting- of the alerts on those bands. So, we'll assume that it IS set up like that. The bandwidth of X and K Band combined are only 250 MHz, compared with Superwide Ka which is 2600 MHz. So it's not going to gain you much.

Running in USA mode will gain you a bit though...

[Ace_Racer]

Thank you Jimbonzzz!