Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1

    Default Best RX65 Setup for VA?

    I've done some searching around but havent come up with a very specific answer to my question.

    I plan on picking up an RX65 in the next couple weeks and would like to know right off the batt how I need to set it up.

    I was going to go with the Escort 8500 X50 but was told for in VA the RX65 does much better in KA band in comparison to the X50 - and thats important since thats primarily what most LEOs use around here.

    Im in SW Va, if that makes much of a difference - not up near the bigger cities. What type of setup/settings would you VA guys reccomend - POP on or off? X band - off? Etc.

    Also, what type of hardwiring setup do you guys run?

    Thanks!

  2. #2
    Radar Fanatic
    Join Date
    Jan 2007
    Location
    Florida
    Posts
    1,676

    Default

    i've never used this RD, but I'll tell you in general... if X band is not used in VA then do City NoX , ku off, k on , ka on USA mode. Most people also turn pop mode off.

    I am just not sure how does "autoscan" and "highway" modes work.

  3. #3
    Power User
    Join Date
    Nov 2004
    Location
    Maryland
    Posts
    3,939

    Default

    A good radar band configuration on the RX65 for Virginia is POP off, Ka USA, X off, Ku off, SWS off.

    The radar devices that are approved for LEO's to use in Virginia changed on Decemnber 21st 2005. See those post: http://www.radardetector.net/viewtopic.php?t=14166
    Although it is technically possible they could use X band again, I don't think that is very likely since it was banned for years and years before. But it is possible.

  4. #4
    Old Timer
    Join Date
    Jul 2005
    Location
    Great Lakes
    Posts
    6,538

    Default let's

    Let's not forget about turning k band on in VA!

  5. #5
    Professional
    Join Date
    Feb 2006
    Location
    Richmond, Virginia
    Posts
    1,397

    Default

    Agree with the above, I have never run into X band in VA, you definitely need K band, and pop is pretty much useless everywhere.

    I order a hardwire kit and then incorporated a toggle kill switch.

  6. #6

    Default

    Thanks for the reponses guys!

    Quote Originally Posted by asianfire
    Agree with the above, I have never run into X band in VA, you definitely need K band, and pop is pretty much useless everywhere.

    I order a hardwire kit and then incorporated a toggle kill switch.

    Sorry for asking but would you mind elaborating a little more on your setup? I see you're in VA so being stealth is key - I assume you have your RD mounted above your rear view mirror and hardwired from there. What type of toggle switch are you talking about, is that to mute it or completely shut it off if you're pulled over?

    Will this kit do the trick:


    Thanks again!

    Micah

  7. #7
    Professional
    Join Date
    Mar 2006
    Location
    Colorado
    Posts
    1,364

    Default

    Outside of using the hardwire kit you have pictured there.Put a toggle switch in-line with your power wire between your power source and your hardwire display unit.That way in the event that you feel like you need to shut it of in a hurry,you can just flip the switch and not be seen fumbling to shut off your unit it a LEO is near by or you get pulled over.

  8. #8
    Professional
    Join Date
    Feb 2006
    Location
    Richmond, Virginia
    Posts
    1,397

    Default

    Quote Originally Posted by mrcllusb
    Outside of using the hardwire kit you have pictured there.Put a toggle switch in-line with your power wire between your power source and your hardwire display unit.That way in the event that you feel like you need to shut it of in a hurry,you can just flip the switch and not be seen fumbling to shut off your unit it a LEO is near by or you get pulled over.
    X2, however, you really don't need that remote function (unless you want it). I got just the plain hardwire kit (basically a wire with a rj11 jack) and added a single pole single throw switch between the kit and another piece of wire that went to my power source.

    I also have a cord that plugs into a cigarette lighter for when I travel in a rental (which I do often for the job). I don't have a toggle switch on that because I travel very little in VA, except to get to NC or other states.

  9. #9
    Good Citizen
    Join Date
    Jun 2005
    Location
    COPPELL, TX
    Posts
    147

    Default

    How are you folks getting away with having radar detectors in Virginia?
    Just a question, but i think its funny as hell.
    I mean what do you do when a leo drives by and sees you rd on the windsheild?

  10. #10
    Radar Fanatic
    Join Date
    Jul 2006
    Location
    Wouldn't u like to know
    Posts
    2,014

    Default

    Quote Originally Posted by Event Horizon
    i've never used this RD, but I'll tell you in general... if X band is not used in VA then do City NoX , ku off, k on , ka on USA mode. Most people also turn pop mode off.

    I am just not sure how does "autoscan" and "highway" modes work.
    I would turn Xband off, citynoX is going to cut your sensitivity down on Kband as well.

 

 

Similar Threads

  1. My CB Setup
    By brianric in forum Scanners, Ham Radios, & CB's
    Replies: 11
    Last Post: 08-29-2010, 08:58 PM
  2. My setup
    By Ron_NC in forum Motorcycle Protection
    Replies: 16
    Last Post: 03-27-2009, 10:48 PM
  3. Best RX65 setup for Las Vegas, NV
    By jballrolin in forum Beltronics
    Replies: 0
    Last Post: 02-24-2007, 06:43 PM
  4. RX65 Setup
    By phiberglass in forum Beltronics
    Replies: 9
    Last Post: 02-18-2007, 10:45 AM
  5. Replies: 11
    Last Post: 07-31-2006, 07:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •