Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Newcomer
    Join Date
    Mar 2007
    Posts
    56

    Default hard wire an rx65

    Need info on this, i dont want the smartcord, just the regular directwire kit.. first off my radar detector is sitting right on the dash with the suction cups on the window so its pretty close to the back of the dash... if i can run the cord down behind the dash board would it be a good idea to just plug it into the cigerette lighter that way it is only on if the car is on? or is that a bad place to do it? and either way, if i do this i'll need an inline fuse correct? if so what size fuse should i get?

  2. #2
    Yoda of Radar
    Join Date
    Nov 2005
    Location
    NY
    Posts
    11,015

    Default

    If your still going to plug it into the cig. adaptor... you might as well contact VR and get one of their plugs... run a flat-cord telephone line from it up along your trim to your RD...

    Thats my .02

  3. #3
    Newcomer
    Join Date
    Mar 2007
    Posts
    56

    Default

    whats VR?

  4. #4
    Power User
    Join Date
    Jan 2005
    Posts
    3,724

    Default

    Quote Originally Posted by JAYNO20
    whats VR?
    Valentine Research.

  5. #5
    Newcomer
    Join Date
    Mar 2007
    Posts
    56

    Default

    Is their plug something more fit for what i want to do?

  6. #6
    Newcomer
    Join Date
    Mar 2007
    Posts
    56

    Default

    if i tap into the cigarette lighter what kind of fuse should i use?

  7. #7
    Yoda of Radar
    Join Date
    Nov 2005
    Location
    NY
    Posts
    11,015

    Default

    Get the VR plug which looks like the following, and a flat line telephone cord (which in the picture u see is plugged in). Simply plug in ensamble as shown into your cig. output, this will give you your 'fused' power for your RX65. (Not only are cig outputs fused by the car... the V1's own power jack that you see also has a fuse in it I am 99% sure... either way, it should be an effective power source.)





    Then plug that whole unit into your cig outlet, it should look something like as follows:


    Then run the telephone line along the back of your dash to your detector (which I gather from your post is mounted like the following:



    Or (my suggestion) would to be actually to change up your location to having it mounted high... and with the directions I just told you it could look (something) like how my set-up is:




    Hope the little picture guide helps... but honestly if you feel you can't do any of this (or even if you feel you can... but can't), do not attempt it, you are still playing with a ~330dollar radar detector (and not to mention your cars panels... and even with the little electricity: your health) so I would advise against it, unless your certain you know what your doing and that you will not have any property (RD), or personal damage (your health).

  8. #8
    Newcomer
    Join Date
    Mar 2007
    Posts
    56

    Default

    yeah i can do it, but i dont want any adapters sticking out of the cigarette lighter.. i wanted to tap into it from underneath... where my cigarette lighter is makes it hard to get to my radio when something big is plugged in.. and it will look cleaner without it like that... so i wanted to go underneath and use the power from the wires down below

  9. #9
    Yoda of Radar
    Join Date
    Nov 2005
    Location
    NY
    Posts
    11,015

    Default

    Quote Originally Posted by JAYNO20
    yeah i can do it, but i dont want any adapters sticking out of the cigarette lighter.. i wanted to tap into it from underneath... where my cigarette lighter is makes it hard to get to my radio when something big is plugged in.. and it will look cleaner without it like that... so i wanted to go underneath and use the power from the wires down below
    Ok, I just did that to show you how it would work...

    Just buy the V1's hardwire kit from VR then... hardwire it? I fail to see the issue here?
    There are many videos explaining how to hardwire a RD (and what sources you can tap into for power), and tutorials on how to hardwire RD's-explinations from users- (not to mention Roy himself has a video on how to do it?)

  10. #10
    Newcomer
    Join Date
    Mar 2007
    Posts
    56

    Default

    and where would i find that?

 

 

Similar Threads

  1. Hard Wire Smart Cord - How do you wire it?
    By RadarKid in forum Escort
    Replies: 2
    Last Post: 06-03-2008, 08:29 AM
  2. x-50 to a hard wire for a v1?
    By mbb11 in forum Radar Detectors - General
    Replies: 9
    Last Post: 06-21-2007, 09:27 AM
  3. DIY HARD WIRE KIT???
    By FASTER in forum Valentine One
    Replies: 6
    Last Post: 01-05-2007, 03:50 AM
  4. Replies: 6
    Last Post: 08-07-2006, 08:30 AM
  5. RJ-11 Hard-wire Kit
    By ES13Raven in forum Escort
    Replies: 1
    Last Post: 10-28-2005, 08:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •