Results 1 to 5 of 5
  1. #1
    Newcomer
    Join Date
    Apr 2007
    Posts
    3

    Default Custom mount, got vibration?

    I made up a custom bracket to mount my Beltronics STi XR. The bracket comprises of a single piece of aluminum with a S bend to under the headliner, it then runs snuggly against the windscreen (foam on the backside) and the small mount is mounted the end of it. The detector fits great however because the detector sits a bit back from the windscreen now the rubber bits on the detector don't touch the windscreen causing it wobble/vibrate alot whilst driving and hard acceleration.

    Does anyone have any suggestions how to over come this? When making the bracket I didn't realize this...

    I will post some pictures up tomorrow.

  2. #2
    Lead Foot
    Join Date
    Nov 2006
    Posts
    378

    Default Re: Custom mount, got vibration?

    i use shock damping foam on mine to eliminate vibrations.
    walmart has big square interlocking mats of them for like $5. just cut a bit off and use it. its called an exercise mat or something. vibration absorbing.
    if you dont want to pay anything you can also get a small block of memory foam for free from tempurpedic. go to the website and ask for the sample kit. they ship you a block of memory foam exactly the size of your RD. stick it under the RD and you will be fine.

  3. #3
    Newcomer
    Join Date
    Apr 2007
    Posts
    3

    Default

    It shakes more on the bracket that goes inside the detector to hold it there. Where can I get that memory foam from? By the way, I am in Australia. ;]

  4. #4
    Newcomer
    Join Date
    Apr 2007
    Posts
    3

    Default

    Ok I have taken a couple of pictures, I think the main problem is that the two rubber points on the detector don't touch the windscreen anymore causing 0 balance. Are there anyways to fix this?




  5. #5
    Old Timer
    Join Date
    Nov 2006
    Location
    Cleveland/Shaker Heights, Ohio, USA
    Posts
    7,732

    Default

    ^ I would guess that to be your issue, too.

    I would either try to allow the rubber points to re-contact the windshield by reconfiguring your custom mount ( very creative, BTW! ), or, alternatively, as the others suggested, use some kind of high-density foam material (something that will allow shock absorption, but not deform too much, especially over time) to "insulate"/isolate the rear of the "lever arm" that projects out to the RD (i.e. to wedge that against the windshield glass).

 

 

Similar Threads

  1. Custom mount
    By supercowpowers in forum Beltronics
    Replies: 7
    Last Post: 07-28-2009, 03:40 PM
  2. V1 custom mount
    By languy99 in forum Valentine One
    Replies: 31
    Last Post: 07-13-2008, 09:40 PM
  3. My little custom mount
    By tvbi in forum Valentine One
    Replies: 17
    Last Post: 08-30-2007, 09:37 PM
  4. Replies: 1
    Last Post: 01-04-2007, 06:13 PM
  5. Bel 980 with custom mount
    By maximadave in forum Beltronics
    Replies: 4
    Last Post: 01-31-2006, 05:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •