I assume that you haven't recently bought or traded up to a new cell phone, or started carrying one around with you while you are driving. Just for the he11 of it, try resetting the RD to its factory defaults which may possibly clear up a hosed EPROM problem. With the power off, hold down the mode and brightness buttons and then press the power button to power up the RD again. If the RD resets correctly, you will then very briefly see a display of the firmware/software version of your RD.
If that doesn't resolve the problem then the RD will have to go back to Bel. If you bought the RD from a source such as an internet auction site or from a non-authorized Bel dealer, then you might want to fix it yourself as the problem may simply be that one or more of the screws which attach the radar horn the the circuit board may be loose. See this thread where I have posted pictures and instructions on how to properly open up your Bel V9XX or RX-55/RX-65 detector:
http://www.radardetector.net/viewtop...299&highlight=
After you have the bottom cover off, simply check to make sure that the visible screws on the circuit board are all moderately tight, but not overly tight as you do not want to overtighten them and crack the circuit board! If this doesn't resolve the problem, then your RD definitely has to go back to Bel.
--Michael
Bookmarks