BEHIND the grill will reduce performance a lot, you need it flush inside the grillOriginally Posted by mrcllusb
|
|
|
|
|
BEHIND the grill will reduce performance a lot, you need it flush inside the grill
I would not put it behind anything except glass and only if necessary and as high as possible.I think better infront of the grille and low than high behind the glass sunband.
There is no place to put it infront of the grille and i have a front plate so down there won't work either.
Cut that lower grille and mount under the bumper fascia if possible
Right in the middle of my front bumper is my license plate mounted to the black plate holder.I would have to mount it to the bottom of that which would put the antenna at about 10" off the ground.Cut that lower grille and mount under the bumper fascia if possible
It doesn't have to be installed in the center.Right in the middle of my front bumper is my license plate mounted to the black plate holder.I would have to mount it to the bottom of that which would put the antenna at about 10" off the ground.Cut that lower grille and mount under the bumper fascia if possible
Oh i forgot to mention i have my LP905 laser heads on both sides of my plate. Here's what they look like http://i156.photobucket.com/albums/t...Install004.jpg
http://i156.photobucket.com/albums/t...Install003.jpg
http://i156.photobucket.com/albums/t...Install002.jpg
[/img]
I would certainly think the shifters could and should be spread to outsides of grill and antenna either side of plate...just my 2 pence
nice install
Thanks Lucky.Murphy i thought of spreading them out but the bumper takes a serious curve right after where they are positioned and i wasn't sure if i wanted them sitting that far back from my front plate.
Posting Permissions
Reply With Quote
Bookmarks