Question regarding Muting

[focalcivic]

I was curious if you mute a signal say a K band alert and another K band alert comes in does the new alert override the orig. muted K?

[ELVATO]

To add to the above question, if you mute a K signal, and a Ka signal comes up, does it alert audibly?

[djrams80]

On my SRX, all K bands are muted. This is easy to see in spec mode, since I can see the frequency change yet the alert stays muted. I have tested this lots of times, since I have a spot close to me with 2 speed signs, directly across the street from each other, each pointed in opposite directions. However if I get a Ka band hit, the mute goes away. This is also true for the same scenario, X->K.

[kuepol]

I will have to test this out on my v940 6.3 to see if it re-alerts audibly if another alert is detected.

[CJR238]

When my voice alert is on my 9500I will alert of "multiple frequency's detected" when more than 2 are received, but if i mute one alert then receive the same band in a new alert i believe it mutes it . I'm not sure if the Bel units do the same thing :roll:

[kuepol]

I will have to test this out on my v940 6.3 to see if it re-alerts audibly if another alert is detected.

the v940 does RE alert, but one audible and then goes quite again.