
Originally Posted by
focalcivic

Originally Posted by
neel
I also wanted to make it clear that she knew about this thread as soon as I started it. She's free to respond to anything I said. I sent her the link twice.
I didn't want to talk about her behind her back. And I posted with as little personal information as possible.
What do you think of the 995? Also, take a look at the serial number I am curious what platform it is, an M4 or S7?
It's an M4. It seems to have less falses than the RX65 (S7 with 2.8 firmware version). When I ran the RX65 with my old Radioshack detector ($35 new), it wouldn't stop falsing on POP. It was continuous (and unrelenting) until I shut off my Radioshack detector. This 995 can be run simultaneously with my old detector.
I ran the RX65 and the 995 past a stationary radar broadcasting on the K band. Both gave about the same warning time, although this was a poor test. The old Radioshack detector also gave a good warning time on this test (in between the non-stop falsing of course).
Other than that, the only 2 differences I noticed are that the 995 doesn't have the threat mode and the 995 doesn't have the Intl/USA option for the Ka band. I was a little worried about the latter, but after reading this board, it seems the 995 uses the equivalent of the Intl Ka. That's what I was planning on using with the RX65.
The threat mode was nice, but I doubt I really needed it. Am I correct in assuming that Ka band takes precedence over K band, which takes precedence over X band if two types of radar are detected simultaneously?
Bookmarks