Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Banned
    Join Date
    Jan 2008
    Location
    Indiana
    Posts
    28

    Default RX-65 and STI detection range difference

    I am thinking about buying a Bel RX-65 or STI is there any difference in the detection range. On the beltronics website it seems like they are both equal. Also Radar Roy ranks them both with 5 stars. If there is no difference in the range I will save myself 150 bucks and get the RX-65.

  2. #2

    Default Re: RX-65 and STI detection range difference

    Quote Originally Posted by Rocky
    I am thinking about buying a Bel RX-65 or STI is there any difference in the detection range. On the beltronics website it seems like they are both equal. Also Radar Roy ranks them both with 5 stars. If there is no difference in the range I will save myself 150 bucks and get the RX-65.
    Hi Rocky,

    Welcome to the forum!

    The STi is marginally more sensitive on Ka band compared to the RX-65. The STi's strongest forte is that, of course, it can not be detected by Spectre RDDs. You really have no need for the STi's Spectre immunity since you live in Indiana. Thus, save the $150 dollars since the RX-65's performance is excellent and will meet your expectations.

  3. #3
    Radar Fanatic
    Join Date
    Jul 2006
    Location
    North Bay, CA
    Posts
    1,705

    Default

    http://guysoflidar.com/ will tell you all you need to know

  4. #4
    Banned
    Join Date
    Jan 2008
    Location
    Indiana
    Posts
    28

    Default

    Thanks for the quick replies and the link. After going to the Guys of Lidar site It almost looks like a X50 would be a better choice in the $300 price range.

  5. #5
    Old Timer
    Join Date
    Apr 2007
    Location
    New Jersey
    Posts
    6,770

    Default

    unless u travel a lot in canada then an STi would not be necessary..unless u ahve to have one like me, but i still used it in canada and i am goin to VA this summer :twisted:

  6. #6
    Newcomer
    Join Date
    Jun 2007
    Location
    olds alberta Canada
    Posts
    37

    Default

    If you travel in the western provences of Canada....then you wouldnt need one IE BC, Alberta, and Saskatchewan, east of SK Manitoba and east you would.....they are only leagal in the three provences...

  7. #7
    Lead Foot
    Join Date
    Nov 2006
    Location
    Tampa
    Posts
    398

    Default

    The STi's looks justify the extra cash if you have no need for stealth.

    I like the tones WAY better on the X50 though. If only someone could give me an STi with the tones of a X50???????

  8. #8
    Old Timer
    Join Date
    Apr 2007
    Location
    New Jersey
    Posts
    6,770

    Default

    the STi is a tank too..i think its like 10.2 ounces of pure undetectableness

  9. #9
    Speed Demon
    Join Date
    Dec 2007
    Posts
    569

    Default

    The STi is nice, but its best feature is not being detectable by current LEO technology. The RX-65 and X50 are both excellent choices and performance is close enough as to not be a difference. If you tested 3 RX-65s and 3 X50s, you might find a greater difference among the same models.

    There are a few differences in features. For example, the Bel has a voice feature that tells you the radar band. But overall, they're quite close.

  10. #10
    Speed Demon
    Join Date
    Jul 2005
    Location
    Indiana
    Posts
    701

    Default

    Quote Originally Posted by Rocky
    Thanks for the quick replies and the link. After going to the Guys of Lidar site It almost looks like a X50 would be a better choice in the $300 price range.
    Indiana State Police use KA exclusively and I can tell you that the RX-65 is better on Ka band while in USA mode than the X50. If I were you, I would get the RX65. This is coming from a lot of experience using both against the ISP.

 

 

Similar Threads

  1. Long range detection, close range J-out
    By Motor On in forum Valentine One
    Replies: 7
    Last Post: 04-11-2009, 10:09 AM
  2. Replies: 8
    Last Post: 05-29-2008, 02:55 PM
  3. Difference between speed reeding range and detection range
    By wildcat in forum Laser Jammers - General
    Replies: 1
    Last Post: 09-11-2007, 09:55 AM
  4. Replies: 3
    Last Post: 01-01-2007, 11:53 PM
  5. Detection range vs Clocking range?
    By carboncopy in forum Beltronics
    Replies: 12
    Last Post: 05-05-2006, 06:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •