Results 1 to 8 of 8

Thread: bel sti-r

  1. #1
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default bel sti-r

    I asked this in another thread but there's like 7 pages so I'll copy and paste my q again, maybe someone can answer here

    Can someone answerthis for me, been a while since I cruised the forums. My SRX has been out all month, I'm saving up $$. I know I should just spring for the 9500i, but does the STi-R support shifting? If I throw on ZR4 or ZR3 heads will shifting be enabled on the STi-R? If so it would be a quick fix for the time being. The STi-Rs are going pretty cheap on fleabay, so was just a thought.

  2. #2
    Advanced Member
    Join Date
    Feb 2005
    Location
    Southern MA
    Posts
    10,127

    Default

    Quote Originally Posted by Lucky225 View Post
    I asked this in another thread but there's like 7 pages so I'll copy and paste my q again, maybe someone can answer here
    I would stay away from the BET STi-R due to it's extreme poor ramp up

    Spoiler: show

    Radar Detectors-V1 & BEL v995
    Laser Jammer-Laser Interceptor Quad
    GPS Camera Locator-Cheetah C100
    GPS Nav-Garmin nuvi w/Trapster
    CB Radio-Galaxy DX-949 w/Wilson 500
    Scanner-RS Pro-96

  3. #3

    Default

    Quote Originally Posted by Lucky225 View Post
    I asked this in another thread but there's like 7 pages so I'll copy and paste my q again, maybe someone can answer here
    ***** The following was edited to correct erroneous info which I posted. Thanks insidercw3 for catching my errors!

    The ZR3 or ZR4 is NOT compatible with the Bel STi-R. Check the Bel and Escort web sites to see which specific dash mount RD models the ZR3 and ZR4 are compatible with.
    Last edited by MEM-TEK; 07-25-2008 at 09:43 AM. Reason: corrected info

  4. #4
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default

    Thanks Mem-tek, I thought so, but thought maybe the models that don't advertise shifting or shifting capability didn't have it built into the firmware. Escort told me old SR7s pre-SR7+ firmware were not compatible with ZR3 shifters and would have to be sent in for a firmware update (This is also evident in older detectors where ZR3/4 show up as LP904 since that's what the firmware is programmed to display when a shifter is plugged in, so if the STi-R doesn't have firmware to handle shifters I would assume the shift menu wouldn't pop up) So has anyone actually thrown some shifters on the STi-R, mem-tek can you video this with your ZR4 or something before shipping the STi-R back just for a quick confirmation?

    Crazyrob- yes I'm aware of the ramp-up, but I usually hit mute at first beep anyways and then watch and rely on the display, it's habbit from driving in killeen where the SRX gets random full blast KA band from base, so I don't think it will piss me off as much as everyone else.

  5. #5
    Lead Foot
    Join Date
    Jan 2006
    Location
    Ohio
    Posts
    444

    Default

    The STi-R is NOT compatible with the ZR3/4. You cannot run the two as an integrated system. You could however run both of the systems separately.

  6. #6
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default

    memtek, video response plz to these allegations

  7. #7

    Default

    Quote Originally Posted by Lucky225 View Post
    memtek, video response plz to these allegations
    I don't have a STi-R to test with. I only had a STi from SML plus my personal STi. Believe me, if insidercw3 says that the STi-R won't work with the ZR3 or ZR4 and that they must be operated as two separate systems, then he is correct. Sorry, I know that this isn't the news you were looking for.

  8. #8
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default

    that is teh sux

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •