Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Old Timer
    Join Date
    Apr 2007
    Location
    New Jersey
    Posts
    6,770

    Default Running STi and V1 question

    Tomorrow i will be going up to CT for the Laser meet up and i am bringing both the STi and the V1...because the STi does not leak at all would that effect the performance of either detector? I will not be running them the same time when i am driving up just when i am testing because i want to compare the laser sensitivity (obvi i no v1 is more sensitive but i am more interesting in seeing how the STi does)

  2. #2

    Default

    Quote Originally Posted by hockey005 View Post
    Tomorrow i will be going up to CT for the Laser meet up and i am bringing both the STi and the V1...because the STi does not leak at all would that effect the performance of either detector? I will not be running them the same time when i am driving up just when i am testing because i want to compare the laser sensitivity (obvi i no v1 is more sensitive but i am more interesting in seeing how the STi does)
    The STi's leakage is so extremely weak that it will not interfere with the V1 as long as you don't mount both of them really low such that either RD's leakage could reflect off of your wiper blades or off of the back edge of your car's hood. You might be able to get away operating both RDs at the same time by mounting both RDs really high on either side of your RVM if you space them two feet apart and allow the slight curvature of your car's windshield to angle them slightly apart. Yet note that vehicles fairly close in front of you are bound to reflect some V1 leakage back into the STi, so possibly expect the STi to either alert a bit late or to occasionally false. The V1 however should perform normally.

  3. #3
    Lead Foot
    Join Date
    Nov 2006
    Location
    Tampa
    Posts
    398

    Default

    So... If I ran 3 STis at the same time, one straight ahead and then one in each corner of the windshield facing 45 degrees outward..... Would I get incredible off axis protection as well as the normal STi straight on range??


    Is there a way to measure leakage to make sure there is no interference??

  4. #4
    Yoda of Radar
    Join Date
    Oct 2007
    Location
    Los Angeles Area
    Posts
    13,879

    Default

    Quote Originally Posted by teeto View Post
    So... If I ran 3 STis at the same time, one straight ahead and then one in each corner of the windshield facing 45 degrees outward..... Would I get incredible off axis protection as well as the normal STi straight on range??


    Is there a way to measure leakage to make sure there is no interference??
    This would almost assuredly work. I know of no way to measure leakage.

  5. #5
    Old Timer
    Join Date
    Apr 2007
    Location
    New Jersey
    Posts
    6,770

    Default

    alright well il report back here tomorrow

  6. #6

    Default

    Quote Originally Posted by teeto View Post
    So... If I ran 3 STis at the same time, one straight ahead and then one in each corner of the windshield facing 45 degrees outward..... Would I get incredible off axis protection as well as the normal STi straight on range??

    Is there a way to measure leakage to make sure there is no interference??
    Theoretically, yes!

    Leakage is limited to approximately 2 feet directly ahead of the STi's dual radar horns and drops off dramatically off-axis.

  7. #7
    Old Timer
    Join Date
    Apr 2007
    Location
    New Jersey
    Posts
    6,770

    Default

    CONCLUSION:

    STi only picked up laser from about 700 feet away with a direct hit..did not use it on the stealth mode LA but Pmoths rx-65 alerted to stealth mode

  8. #8
    Stealthed Like a B-2
    Join Date
    Dec 2007
    Location
    South Eastern, VA
    Posts
    1,813

    Default

    I was thinking about getting a V1 so when I'm on a road that the STI would be vunalrable (spelling) to IO i could use a V1 but I live in VA. But what if I bought 2 sti's and pointed them like this:



    would that be just as effective?

  9. #9
    Old Timer
    Join Date
    Apr 2007
    Location
    New Jersey
    Posts
    6,770

    Default

    the STi would pick up the i/o just like the v1..and its pointless to put the 2 sti's there because 1 will pick up everything in front of you and since ur in VA u can only use the STi, STi-R, and 9500ci

  10. #10
    Speed Demon
    Join Date
    Apr 2008
    Location
    Arizona
    Posts
    591

    Default

    Quote Originally Posted by MEM-TEK View Post
    Theoretically, yes!

    Leakage is limited to approximately 2 feet directly ahead of the STi's dual radar horns and drops off dramatically off-axis.
    I know this is off topic kind of, but how would a V1 and a 9500i would work together?
    I know I had them on before at the same time, and the V1 was picking up the 9500i until I turned pop off on the V1.

    I can mount them about 12 inches apart on top of the rvm
    I want to do some testing on some known spots

 

 

Similar Threads

  1. Another detector interference question (about running two detectors)
    By steve f in forum Radar Detectors - General
    Replies: 4
    Last Post: 11-18-2010, 06:29 AM
  2. Running V1 and STI-R
    By snowman017 in forum Radar Detectors - General
    Replies: 5
    Last Post: 11-07-2010, 10:26 PM
  3. Newbie question on running more than 1 radar detector
    By AgSilver in forum Radar Detectors - General
    Replies: 5
    Last Post: 03-27-2008, 12:34 PM
  4. Question about running two detectors at once..
    By Jabomb9 in forum Radar Detectors - General
    Replies: 7
    Last Post: 01-16-2008, 06:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •