Results 1 to 7 of 7
  1. #1
    Old Timer
    Join Date
    Aug 2006
    Location
    Orlando, FL
    Posts
    8,880

    Default STi and BLKR message

    Every so often, when going by a K band door opener, I'll hear the STI beep and briefly display "XXXX BLKR" (not sure what exactly the XXXX is, all I catch is the BLKR part) and then continue on alerting to the K band.

    It only started within the past couple weeks. The beep is the same one as the beep that lets you know the shifters are on (after the 30 second wait proceeding a laser double mute.)

    Not sure what it could be. Figured someone might know. I'll try to catch what the first part of the message says.

    As a side note, I kinnda liked the phrase "Road" (or was it "Run") that the STI made proceeding a laser double mute to let you know the shifters were back on. Thought it was kinnda funny. After coming back from the ramp up fix, it now only beeps.

  2. #2
    Manufacturer
    Join Date
    Jun 2009
    Location
    Cincinnati, OH
    Posts
    998

    Default Re: STi and BLKR message

    Quote Originally Posted by ELVATO View Post
    Every so often, when going by a K band door opener, I'll hear the STI beep and briefly display "XXXX BLKR" (not sure what exactly the XXXX is, all I catch is the BLKR part) and then continue on alerting to the K band.

    It only started within the past couple weeks. The beep is the same one as the beep that lets you know the shifters are on (after the 30 second wait proceeding a laser double mute.)

    Not sure what it could be. Figured someone might know. I'll try to catch what the first part of the message says.

    As a side note, I kinnda liked the phrase "Road" (or was it "Run") that the STI made proceeding a laser double mute to let you know the shifters were back on. Thought it was kinnda funny. After coming back from the ramp up fix, it now only beeps.
    That sounds like a problem with your STi. If you see it happen again or notice any other irregular behavior please call our customer service department. The phone number is in the manual to your unit along with instructions for returning the unit.

  3. #3
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default Re: STi and BLKR message

    Is it an STI driver or Sti-R?

    In any event, Beltronics calls laser shifters 'laser blockers', and if I recall correctly the RX75 would display LSR BLKR when jamming, prehaps it might be a problem with the rj-9 jack if it's an STi-r. Otherwise I'd send it in.

  4. #4
    Professional
    Join Date
    Mar 2006
    Location
    Colorado
    Posts
    1,364

    Default Re: STi and BLKR message

    Do you have HID headlights?On some vehicles due to the hid flicker rate,they can and will setoff your shifters/blockers.

  5. #5

    Default Re: STi and BLKR message

    Quote Originally Posted by EscortRadar View Post
    Quote Originally Posted by ELVATO View Post
    Every so often, when going by a K band door opener, I'll hear the STI beep and briefly display "XXXX BLKR" (not sure what exactly the XXXX is, all I catch is the BLKR part) and then continue on alerting to the K band.

    It only started within the past couple weeks. The beep is the same one as the beep that lets you know the shifters are on (after the 30 second wait proceeding a laser double mute.)

    Not sure what it could be. Figured someone might know. I'll try to catch what the first part of the message says.

    As a side note, I kinnda liked the phrase "Road" (or was it "Run") that the STI made proceeding a laser double mute to let you know the shifters were back on. Thought it was kinnda funny. After coming back from the ramp up fix, it now only beeps.
    That sounds like a problem with your STi. If you see it happen again or notice any other irregular behavior please call our customer service department. The phone number is in the manual to your unit along with instructions for returning the unit.
    Performing a factory reset might possibly fix the problem. Elvato, if you currently are using the fast startup sequence, switch to the normal startup sequence and note anything unusual about the startup sequence. If so, do the factory reset and that should fix that puppy right up.

  6. #6
    Old Timer
    Join Date
    Aug 2006
    Location
    Orlando, FL
    Posts
    8,880

    Default Re: STi and BLKR message

    It's an STI driver, running with fast start up on.

    It might be the power cord since the black cover plastic has pulled back from the plug end of the wire. Might also explain why I've been getting random front and rear laser alerts (well, "shifting"/jamming.) Granted, it hasn't done any of the above at least for this weak.

    But yea, I'll try the reset and see if that fixes things.

  7. #7
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default Re: STi and BLKR message

    Quote Originally Posted by ELVATO View Post
    It's an STI driver, running with fast start up on.

    It might be the power cord since the black cover plastic has pulled back from the plug end of the wire. Might also explain why I've been getting random front and rear laser alerts (well, "shifting"/jamming.) Granted, it hasn't done any of the above at least for this weak.

    But yea, I'll try the reset and see if that fixes things.
    I doubt the reset will do it, I had similar issue with the SRX, only way to fix it is cut the cord and splice on a brand new Rj9, so long as those wires are loose and exposed, when they get in close contact(don't even have to touch) you'll get a false.

 

 

Similar Threads

  1. Need to post a message here to post a message in escort
    By Greg14 in forum Introduce Yourself
    Replies: 0
    Last Post: 12-11-2009, 01:08 AM
  2. Could they be getting the message???
    By Qui-Gon in forum Photo Enforcement
    Replies: 2
    Last Post: 05-20-2009, 01:08 PM
  3. self-cal message
    By rkim11 in forum Escort
    Replies: 1
    Last Post: 03-25-2007, 11:00 PM
  4. What does an 'E' message look like?
    By grob in forum Valentine One
    Replies: 7
    Last Post: 08-31-2006, 06:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •