Results 1 to 4 of 4
  1. #1
    Newcomer
    Join Date
    Dec 2009
    Posts
    17

    Default Antenna placement

    Reading some threads that state that the STI -R antenna should NOT have an obstructed "view " of the road. I thought it was the jammers that had to have clear view.

  2. #2
    Experienced
    Join Date
    Oct 2009
    Location
    Minot ND
    Posts
    204

    Default Re: Antenna placement

    From reading other posts and my experience any obstruction of the view of the antenna will decrease sensitivity. My antenna was flush with the lower grill and with me moving it forward about an inch made quite a difference especially with off axis

  3. #3
    Newcomer
    Join Date
    Dec 2009
    Posts
    17

    Default Re: Antenna placement

    So, NO obstruction and ahead enough from the grill. Does it matter if NOT on center??

  4. #4
    Yoda of Radar
    Join Date
    Oct 2007
    Location
    Los Angeles Area
    Posts
    13,879

    Default Re: Antenna placement

    Quote Originally Posted by vpr hlr View Post
    Reading some threads that state that the STI -R antenna should NOT have an obstructed "view " of the road. I thought it was the jammers that had to have clear view.
    They both do:

    1) Laser jammers do not work at all behind anything, period.

    2) Testing has shown that mounting a radar antenna behind car parts can sometimes create a dramatic decrease in performance. This happened to me. Ka sensitivity was very poor when I mounted my 9500ci's radar antenna here:



    I never thought a plastic grille that I could see right through would have such a dramatic effect on performance. Then I remounted it here and performance skyrocketed!:



    The local expert on remote antenna mounting, MetalFlame, had this to say on this subject:

    http://www.radardetector.net/forums/...tml#post632600

    Quote Originally Posted by MetalFlame View Post
    Remote receiver can be mounted behind plastic bumper or grille,without loosing detection,but plastic must be flat,not curved.
    Also,I don't know if this holds true for circular polarized radars,but horizontal grille slats reduce detection range more than vertical slats.

    Avoid mounting behind:
    *bumper that's made from/with carbon fibers,Poly-Carbonate
    *things made with graphite,teflon,lead
    *metallic paint or old paints with lead
    *any metal objects
    *thick grilles

    Some of the newer BMW models,AUDI's and VW's have have very "bad" bumpers,that don't pass Radar signals well.VAG cars have bumpers from PPP-EPDM which attenuate radar signals.

    Bumpers made with/from PP,ABS+PET, ABS, ASA, EVA, PS will pass Radar signals.

    Another VERY important thing is to ALWAYS mount radar receiver at least 2-3 inches behind the bumper or any other (plastic) obstacle.

 

 

Similar Threads

  1. Antenna Placement Tips For Everyone
    By fwb in forum Scanners, Ham Radios, & CB's
    Replies: 3
    Last Post: 01-12-2010, 07:47 PM
  2. Antenna Placement Suggestions
    By QuickTrigger in forum Scanners, Ham Radios, & CB's
    Replies: 50
    Last Post: 08-19-2009, 04:01 PM
  3. 9500ci antenna placement suggestions
    By focalcivic in forum Escort
    Replies: 18
    Last Post: 09-14-2008, 08:10 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •