Who would like smaller frequency lockout blocks on K band Truelock? Maybe 10mhz or something like that?
Who would like smaller frequency lockout blocks on K band Truelock? Maybe 10mhz or something like that?
Only if it doesn't make the false alerts that I have locked out come back. My guess is that the blocks are that wide for a reason, maybe to account for frequency drift.
actually I think the blocks are already around 10MHz, because of the freuqency drift door openers have, consequently multiple blocks are locked out....
More important would be to have a footprint for the excat location and small frequency block, if the frequency drifts after 1/100mile, store that information with location and new frequency...
Cant make them much less than 30MHz do to drift of the falses. Would be relearning all the time and falsing on previous lock outs.
Actual location, direction and area of false would solve a lot. Most falses only fluctiate in size slightley so a flexible radious within a hundred feet would be sweet.![]()
Smaller K band frequency lockout blocks?
Yes, but...
I'm affraid this is impossible to provide with existing Escort & Beltronics RDs because of the changes in frequency seen by them caused by changes in temperature during operation. RDs Local Oscilators are voltage controlled and voltage is changed by temperature of internal electronics. As I observed, the accuracy of these devices is within +/- 20 MHz.
I think i might have worked out half of my problems. I've been running my STi-R Plus in highway mode the whole time. I'm going to erase all my lockouts and start fresh using autolearn and autoscan.
Had another problem rear it's head just befor aswell. It notified me of red light cameras being at an intersection that dont have them. I go through this intersection ten times a day and this one time i get a warning for red light cameras?
I'm honestly starting to regret my purchase. I wish i keep my old trusty sti-r.
This thing is doing my head in. If its not one thing its another. Even the wife can pick all the faults.
Missed another camera car before too. I hate you beltronics![]()
You've got the drift of the radar detector, and the drift of the motion sensor. The motion sensor can drift a few of Mhz for every 10 degrees of temperature change. Really, it's amazing to me that they work as good as they do with current sizes.
Maybe it wouldn't be such a problem if the detector also considered the number of signals present?
Say, for example, that there are 30 mhz blocks for lockout out a signal, but within that 30 mhz the detector is also looking at every 5 or 10 mhz block to see how many signals are there. It wouldn't keep track of what the exact frequencies are, just that if there is normally only one door opener in the 30 mhz lockout block and then one day there are two signals, it would alert.
As I understand it, now it doesn't care exactly how many signals are present, it just determines the frequencies of what it's detecting and liberally locks out every 30 mhz block a signal is present in.
After reading the input from you guys and slowly understanding more about the way this gps based system works.
I think a much much much much smaller lockout radii is the key to a more succesful working system. Prehaps a user selectable option.
For example
100m
200m
300m
and so on.......
totally agree, especially the point:
user/country selectable option
Bookmarks