|
|
is there anyway i could send my rx65 in and just get them to check it? I already have the 4.5 version but do you think they would check it or something? I would pay w/e for it, but i would just like to know if my detector is performing to its top ability. I got mine off ebay. so far i'm have quite a good experience, I've been using it for like 7 months .I got like over a mile K band alert the other day.
IIRC one of our members just drove up to the factory and asked them to tune the thing, and they did something to prove it workedBut if you are a little far away, you are probably paying the $85 for them to even look at it.
I got it off ebay as well and received it 2 days ago, version 2.9 Can you please tell me if these numbers run right
Also serial of the Radar at bottom says QL4G7M4, which i checked in other threat and it should be a newer version, shouldn't it?
X band Facing Opposite Direction. Radar went on at like .2miles (was coming around a curve) (if it detected that late and cop was facing me i'd be caught - if i was speeding, cause i saw him last second)
X band Facing me. .4miles (Straight Open road)
Ka .2 I was on one side of the bridge and he was on the other, so Didn't see him as he was at the bottom of the bridge on one side and i was at bottom of the other side.
So what do you guys think, because this i guy i got it from advertised it as Bel Pro RX65 Radar/Laser Detector by Beltronics - 2005 Version with Latest Upgrades!
Which i assume is false and could most likely Return for a refund. Username on ebay of seller is kbtronix (item # 5847363686)
I get ripped off?
Thank you, wish i found this board before i made my purchase, but darn this is my first detector so i don't know what to compare it to...
:shock:Originally Posted by tripleflip18
I've got the same thing.
AG060813 4705
FCC ID: QL4G7M4 and it says its ver 2.9 :?:
Send it back it should perform better than that!Ka .2 I was on one side of the bridge and he was on the other, so Didn't see him as he was at the bottom of the bridge on one side and i was at bottom of the other side.
Since it has the newer FCC ID , is VER 2.9 a newer version?
WAIT!!!!!!!!!!!!!!!!!!!
I had the same problem... I just got mine back today from Bel.. I then fired it up, and realized that it still had Rev 2.9 . I then contact the technician who actually worked on my radar detector, and he stated that we have the M4 newer version Antenna, which will have a different revision. ?How can you tell if you have it also? Look on the bottom of the radar, and you will see under the serial number several letters ending with the M4, in some cases, the december models may have a M2, but it is actually an M4. Whether this is true or not, it makes perfect sense to me because I have spent days and weeks researching to see if anyone else had a 2.9, and it was like un heard of. Now that I see you all having the same concern as I did, I hope this information has cleared your minds or given you a piece of mind. If anyone else has any different information or has heard of the M4 Antenna, please let us know.
BTW, this is my first post here, and I hope my information is 100% correct based on what was explained to me.
Purchased my Radar last month. RX65 M4 Rev. 2.9
hello every one im new here been reading for a little while just got my rx65 and mine also is the QL4G7M4 and its at 2.9 i called who i ordered it from and he told me he got it from bel 3 weeks ago and did not no why it was at 2.9 but told me to send it back and he would flash it with the 4.5 for free he was not a certified bel dealer so i would have to pay for bel to do it no its not ebay but its supposed to be brand new but dont know if i should send it now if its supposed to be at 2.9 any input would be nice thx
Ok, I bought mine from Radar Roy 2 weeks back and checked it is also QL4G7M4 with Ver2.9. I was like oh-oh !! (that was before OrlNmE posted his) I guess what OrlNmE say it's true, probably RadarRoy can confirm? Cheers!
Posting Permissions
Reply With Quote
Bookmarks