Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Newcomer
    Join Date
    Apr 2011
    Location
    Alaska
    Posts
    38

    Default STI-R Plus programming questions.

    I have downloaded the owners manual and have searched thru tons of stuff here concerning the STIR+ and still have some questions.
    The manual states you have to enable the radar function with there software tools, im assuming i download the software to my pc then carry it to the car and plug in to enable it?

    Once I have it enabled should i leave it factory default other than turning off RDR and all KA bands other than 2/5/8 for best performance? Maybe one of the experts here can list the functions i should and should not change?

    Mine should be here Wensday and looking forward to getting it installed, still just a little confused on the programming.

    Thanks in advance for anyone that can help!

  2. #2
    Old Timer
    Join Date
    Jun 2005
    Location
    New Hampshire
    Posts
    6,805

    Default Re: STI-R Plus programming questions.

    The North American version of the STi-R+ ships with radar detection enabled so there's no need to use Detector Tools to enable detection. You'll just need it to download updates to the GPS database if you like.

    As for settings, you may want to turn Autolearn (Autolock) off after you've driven through your regular driving spots a few times to prevent accidentally locking out a real LEO. Also, if X band isn't used where you are, you can turn that off as well.
    If I'm passing you on the right, YOU are in the wrong lane!

    If speed kills, how come I'm still alive?

    Active Countermeasures: V1 3.858, Escort Redline, Beltronics STi-R+, LI Dual 7.1x CPU/8.7 Heads (front)
    Other/Backup Countermeasures: V1 3.813 (loaned to friend), Beltronics Pro RX65 M4 6.3
    Vehicle: 2002 Audi A4 1.8T Quattro
    LEO Toys: Kustom Pro Laser II & III
    Encounters/Saves August 2011: Radar 3/1, Laser 0/0


  3. #3

    Default Re: STI-R Plus programming questions.

    Quote Originally Posted by kpatz View Post
    The North American version of the STi-R+ ships with radar detection enabled so there's no need to use Detector Tools to enable detection. You'll just need it to download updates to the GPS database if you like.

    As for settings, you may want to turn Autolearn (Autolock) off after you've driven through your regular driving spots a few times to prevent accidentally locking out a real LEO. Also, if X band isn't used where you are, you can turn that off as well.
    Im not sure what bands are used in Alaska. But definitely do RDR off, research what ka bands u need and dont need then turn those off. And use "highway mode" which is full power/sensitivity. And youll be ready and "loaded for grizzly bear"
    Last edited by ExoticRadar; 04-17-2011 at 09:31 PM.

  4. #4
    Newcomer
    Join Date
    Apr 2011
    Location
    Alaska
    Posts
    38

    Default Re: STI-R Plus programming questions.

    Thats good to know, must have downloaded the wrong manual or they didnt change it.

  5. #5
    RadarBusters Associate
    Join Date
    May 2009
    Location
    Orlando, FL
    Posts
    2,274

    Default Re: STI-R Plus programming questions.

    Quote Originally Posted by hirevn View Post
    Thats good to know, must have downloaded the wrong manual or they didnt change it.
    was it the manual from radarbusters.com? If so that is just the standard manual. The manual you will receive will most likely say the same thing. at least mine did. lol

  6. #6
    Mobile Installer
    Join Date
    Jul 2007
    Location
    East Coast (USA)
    Posts
    4,203

    Default Re: STI-R Plus programming questions.

    leave everything on unless you know what radar freq bands are used in your state to tweek band seg.

  7. #7
    Newcomer
    Join Date
    Mar 2011
    Posts
    1

    Default

    Can anyone recommend the best tweaks/settings for Florida? Thanks.

  8. #8
    Newcomer
    Join Date
    Apr 2011
    Location
    Alaska
    Posts
    38

    Default Re: STI-R Plus programming questions.

    Quote Originally Posted by radarrob View Post
    leave everything on unless you know what radar freq bands are used in your state to tweek band seg.
    I thought there were only 3 used here in the usa? Heres a qoute i found on another forum.

    Easy.......Segs 2, 5, 8 (ON)........everything else OFF.

    I'll give you the complete list of active Ka frequencies in the US over the last 15 years.

    33.8 GHZ
    34.7 GHZ
    35.5 GHZ
    Last edited by hirevn; 04-18-2011 at 03:20 PM.

  9. #9
    Mobile Installer
    Join Date
    Jul 2007
    Location
    East Coast (USA)
    Posts
    4,203

    Default Re: STI-R Plus programming questions.

    you never know when a radar gun wll will be out of tune and miss the freq.its rare but you never know

  10. #10
    Newcomer
    Join Date
    Apr 2011
    Location
    Alaska
    Posts
    38

    Default Re: STI-R Plus programming questions.

    OK, thanks for the advice. Maybe just leave them all on for a while why i learn what the leo's are using in my area for freq.

 

 

Similar Threads

  1. Best programming for an STI-R?
    By David_S4 in forum Beltronics
    Replies: 19
    Last Post: 10-02-2009, 06:01 PM
  2. Newbie Questions About Programming, etc.
    By Venusian_Artist in forum Valentine One
    Replies: 16
    Last Post: 05-06-2008, 08:06 PM
  3. V1 First Impressions & Programming Questions
    By SmokeX50 in forum Valentine One
    Replies: 10
    Last Post: 11-07-2007, 08:07 PM
  4. Programming questions....
    By Razmo in forum Valentine One
    Replies: 1
    Last Post: 04-05-2007, 01:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •