Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1

    Default RX65 Ka mode???????????

    Hi,
    I live in illinois, USA my question is whats the differance between the Intl and USA mode for Ka? I called Bel and did not get much help. I am using it in Intl mode but i wonder if the range is differant between the two settings. Anybody know for sure? My K band goes off alot with SWS off. When i use my Bel vector 970, in the same spots where the RX65 alerts K, the 970 alerts X. This is by a supermarket. Whats up with that?

  2. #2
    Advanced Member
    Join Date
    Dec 2004
    Location
    Michigan
    Posts
    7,509

    Default

    USA Mode sweeps only the three frequencies used for Ka police radar in the US, and will give you more range on those frequencies than INTL, which sweeps the whole 33.4-36 GHz range.

    There has been some speculation that there are a few Ka guns out there on frequencies that USA mode does not sweep. But if this is truly the case, it is extremely rare.

    Jim

  3. #3
    Yoda of Radar
    Join Date
    Nov 2005
    Location
    NY
    Posts
    11,015

    Default

    Ahhh yes... Its great when you call the company that makes the detector, and you dont get the awnser you need; then you come on here... and Jim takes care of it.

    Good times.

  4. #4
    Yoda of Radar
    Join Date
    Mar 2005
    Location
    Rottweiler Land
    Posts
    10,420

    Default

    What part of the anus state are you from?

  5. #5
    Radar Fanatic
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    2,816

    Default

    The lady at BEL told me not to use Accusweep mode, which is similar to USA mode. She told me to use Superwide Ka band and that all the newer BELs no longer have an Accusweep/USA mode.

    I do have an older Stalker handheld running at 35.2 GHz in my area. But I agree this is not very common. It's all a matter of how lucky do you feel?

    GTO_04

  6. #6
    Professional
    Join Date
    Oct 2005
    Location
    PA
    Posts
    1,164

    Default

    GTO_04 Posted:

    The lady at BEL told me not to use Accusweep mode, which is similar to USA mode. She told me to use Superwide Ka band and that all the newer BELs no longer have an Accusweep/USA mode.
    :shock: What is the reason for not using USA mode? I thought it provided the best range comapred to INTL.

  7. #7
    Radar Fanatic
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    2,816

    Default

    Quote Originally Posted by mikered30
    GTO_04 Posted:

    The lady at BEL told me not to use Accusweep mode, which is similar to USA mode. She told me to use Superwide Ka band and that all the newer BELs no longer have an Accusweep/USA mode.
    :shock: What is the reason for not using USA mode? I thought it provided the best range comapred to INTL.
    The RX-65 has shown better range in USA mode. There is an outside chance you could run into a Ka band radar running outside the 3 USA mode frequencies 33.8, 34.7, and 35.5 GHz. I ran into a Stalker handheld at 35.2 GHz and my 985 got zero warning in Accusweep mode.
    Is this common? Probably not. But it can happen. It depends on how lucky/unlucky you are.

    GTO_04

  8. #8
    Good Citizen
    Join Date
    Sep 2005
    Location
    Melbourne, Florida
    Posts
    191

    Default use intl mde not usa mode

    the reason is so you will detect in tune and any out of tune radar gubs out there which aare more than led to believe.
    i wopuld set intl mode and not worry.

  9. #9
    Professional
    Join Date
    Feb 2006
    Location
    Richmond, Virginia
    Posts
    1,397

    Default

    Basically, as you can see, each has his own opionion. USA mode, longer range. Int mode, wider sweep of frequencies detected. Make your own mind up as to which one to use.

  10. #10
    Speed Demon
    Join Date
    Nov 2005
    Location
    Mars Command and Control
    Posts
    612

    Default

    My RX65 is in USA mode with LoX enabled and POP enabled.
    I always run in town with City LoX. This in sures me i have great Ka and K band range and filter out alot of X. This has made the RX65 really quiet. It can also increase the detection for junk detectors. But it is easy to judge if you use Tech mode and the fact they don't alert that long and are weak signals.

 

 

Similar Threads

  1. Bel V955 v. RX65 If not used in USA Mode
    By KMG1219 in forum Beltronics
    Replies: 3
    Last Post: 04-04-2012, 09:05 AM
  2. RX65 USA Mode
    By red04svtfocus in forum Beltronics
    Replies: 1
    Last Post: 10-29-2011, 11:37 PM
  3. What mode do yo use for Ka band on your Rx65.
    By RoadWarrior86 in forum Beltronics
    Replies: 11
    Last Post: 11-20-2008, 11:34 PM
  4. who here use their rx65 in usa mode and.....
    By Valerino in forum Beltronics
    Replies: 0
    Last Post: 07-18-2008, 11:25 AM
  5. RX65 POP Mode
    By SCRadarGuy in forum Beltronics
    Replies: 32
    Last Post: 03-07-2006, 02:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •